• Journal of the Korean Institute of Navigation
• /
• v.21 no.3
• /
• pp.1-18
• /
• 1997

From the beginning of 1990s , also in the shipping industry, especially liner shipping industry competition has been more intensive and difference of the service quality among shipping companies has been learned . On the other hand, a shipping company has some limitations to do its international mission for itself just by broadening service area. For this reason, the necessity for the global strategi alliance among the shipping companies, which is orginally aimed at sharing of facilities and organixation, has been developed. Through strategic alliance, liner shipping companies do not need to input the additional capitals to increase the material assets such as vessel capacity and spread the risk by the enlargement of the market. Also, they can secure the competitive edge through efficient utilizaton of assets. The purpose of strategic alliance of Hanjin Shipping Ltd., can be summarized as follows ; broadening of service area, cost reduction through vessel sharing, realization of rationalized shipping service by terminal and equipment or facilities sharing. Liner strategic alliances are agreement among liner companies to pol their equipment , andterminals for joint operations and services in which each alliance partner continues to serve its market using jointly operated or used inland feeders,inland terminals, port terminals, and mainline fleets of ship as well as joint pools of containers and equipment. Strategic alliances are generally more formal agreements than consortia and impose longer term and far reaching obligation on their members. It also acts as one in developing and advancing the strategic aims of the alliance members. The most important objective for liner strategic alliances is cost reduction and improvement in capital asset utilization. Main aims of strategic alliance drawn in this paper, can be enumerated follows : 1. improvements in service frequency and quality : 2. improvements in vessel and equipment utilization and thereby reductions in fixed and variable cost ; 3. improvements in market shares and high value cargo booking ; 4. reductions in intermodal storage and port terminal throughput costs ; 5. improvements in negotiating powers with ports and feeder transport providers ; 6. reduction in financial and other fixed costs such as insurance; 7. coordination and integration of MIS and EDI systems and service for greater efficiency and market penetration ; and, 8. improvements in logistic chain management and economic of scale by equipment depot, terminal, and vessel sharing.

• Journal of Navigation and Port Research
• /
• v.33 no.10
• /
• pp.723-734
• /
• 2009

Container Vessel is becoming larger and faster thanks to the rapid growth of global trade and development of technology. Therefore, 15,000TEU vessel is expected to be ordered in near future. Every nations in north-east Asia are facing strong competition to be logistics hub to get the initiatives of logistics in response to the rapid change of logistics environment. According to the globalization of economy and major ports in this region also are trying to catch big shipping line for their survival. Considering above circumstances of the advent of ultra-large container vessel and spoke-and-hub strategy, it is inevitably necessary to make a fast and accurate vessel job in the terminal in order to be a leading port To meet this objective, current vessel planning system has to be improved innovatively. Therefore, this thesis propose multi distributed vessel planning system which enables multi loading/discharging planning with several planner simultaneously for faster and more accurate than existing planning and enhances quality of planning through information sharing among planners. Also this thesis uses simulation through Arena to verify the efficiency of this multi-distributed vessel planning system.

• Journal of Navigation and Port Research
• /
• v.34 no.6
• /
• pp.487-492
• /
• 2010

Ulsan Port is the biggest base port for liquid cargoes in Korea and is pushing in earnest for the development of the 'Ulsan New Port' and 'Northeast Asia Oil-Hub' to prepare for continuous shipment growth. However, Ulsan is in the situation which the harbour limit and anchorages are narrower than other trading ports and the occurrence probability of marine accidents is very high due to heavy marine traffic. We will find and suggest the plan to enlarge the harbour limit essentially needed to expand anchorages considering the geomorphological features of Ulsan and the volume of marine traffic in this research. For the enlargement of harbour limit needed to expand anchorages, the anchorage area needed for Ulsan New Port was calculated after the quantitative analysis of enlargement range through the mutual comparison of the area of harbour limit and anchorages with berths and the volume of marine traffic. The reasonable type of harbour limit, which is based on the survey by a group of experts, was also determined after the decision of the range of harbour limit to accommodate the relevant anchorages.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.16 no.2
• /
• pp.9-21
• /
• 1988

This study was to obtain effect of stem leading time and angles on the growing and flowering in climbing rose. The results were as follows : In the rambler type, climber type and pillar type, differences of bud size were decreased between upper ports and lower parts as leading angles were close to the horizon. And bud type was like a long-egg shape. regardless of growing type, differences of stets diameter between upper parts and lower parts were decreased when the angles were leaded horizon. In order to increase rate of shooting and flowering, regardless of leading time, rambler type was shooted in a short period and flowered evenly, from upper to lower parts of stem as leading angles were horizon. But in the case of 45$^{\circ}$, the rate of lower parts was nearly zero. In climber type, shooting and flowering was only happened to the lower parts of stem when leaded during growth stage according to leaded horizon. These phenomena are supposed that shooting and flowering rate are influenced by not only apical dominance but degree of bud growth. Meanwhile, pillar type was shooted and flowered evenly to lower parts when the stem was leaded during growth stage or not leaded completely. But in creeper type, there was no connection with the leading. Therefore, this type had better not leaded. Length of flowering stem, regardless of growing type, was equaled when leaded during growth stage according to leaded horizon.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.57-64
• /
• 2017

Today, due to the environmental regulations regarding air pollution in the EU, the use of EPS (Styrofoam) as the cushioning material in the packaging industry is decreasing. In effect, air cushioning based cushioning materials are rapidly expanding into the market and replacing EPS, due to their excellent buffering ability and environmental friendliness. This is a new selective filling type air filling material manufacturing technology that affords improvements in the amount of raw materials required, its processing and its aesthetic appearance compared to the conventional air filling cushioning materials. In this study, a multi-stage air cell filling valve molding technology is developed based on selective filling technology, which allows packages to be selectively filled in various forms by applying valve forming structure technology. This multi-stage air cell filling valve molding technology is a technique in which a plurality of injection ports are formed by laminating three layers of films, viz. a first injection film, a valve film, and a second injection film having valve ends. In the conventional technology, a separate external air injection path for injecting air into a plurality of connected air bags is needed. However, in the proposed system, an external air injection path is formed inside the air bag, Due to the lack of need for an injection furnace, the raw material and process are reduced and air is injected and then discharged, while the air bag is reduced in length to 63 ~ 66% of its normal value. The outer surface of the outer air injection path is integrated inside by maintaining the original length of the cross section, while the unnecessary folded air is injected into the interior of the air bag, This smart air filling type cushioning material manufacturing technology constitutes a big improvement over the existing technologies.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.4B
• /
• pp.369-376
• /
• 2011

A three and two dimensional (3D and 2D) numerical models were established to study the storm surge induced by Typoon Maemi in Masan and Pusan Ports. The typhoon landed on the southern coast of Korean Peninsula at 21:00, September 12, 2003 with a central pressure of 950 hPa. The observed maximum storm surge in Masan Port was 230 cm, and the computed peak storm surge using the 3D and the 2D models were 238 cm and 208 cm, respectively. The observed maximum storm surge in Pusan Port was 89 cm, and the peak storm surge of the 3D and the 2D models were 91 cm and 79 cm, respectively. The hindcasted storm surge using 3D model was in good agreement with the observed data, and the 3D model at peak time was more accurate than the 2D. The storm-induced currents were computed using the 3D model. The currents in the surface layer of Masan Bay went into the inner bay with 30~60 cm/sec, while the currents in the bottom layer flowed out with 20~40 cm/sec.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.2A
• /
• pp.123-130
• /
• 2012

A cooling system is indispensable for the fossil and nuclear power plants which produce electricity by rotating the turbines with hot steam. A cycle of the typical cooling system includes pumping of seawater at the intake pump house, exchange of heat at the condenser, and discharge of hot water to the sea. The cooling type of the nuclear power plants in Korea recently evolves from the conventional surface intake/discharge systems to the submerged intake/discharge systems that minimize effectively an intake temperature rise of the existing plants and that are beneficial to the marine environment by reducing the high temperature region with an intensive dilution due to a high velocity jet and density differential at the mixing zone. It is highly anticipated that the future nuclear power plants in Korea will accommodate the submerged cooling system in credit of supplying the lower temperature water in the summer season. This study investigates the approach flow patterns at the velocity caps and discharge flow patterns from diffusers using the 3-D computational fluid dynamics code of $FLOW-3D^{(R)}$. The approach flow test has been conducted at the velocity caps with and without a cap. The discharge flow from the diffuser was simulated for the single-port diffuser and multi-ports diffuser. The flow characteristics to the velocity cap with a cap demonstrate that fish entrainment can significantly be minimized on account of the low vertical flow component around the cap. The flow pattern around the diffuser is well agreed with the schematic diagram by Jirka and Harleman.

• Journal of Korean Society for Atmospheric Environment
• /
• v.34 no.1
• /
• pp.1-15
• /
• 2018

Nation-wide systematic and comprehensive measurements of air quality criteria species have been made over 340 sites currently in Korea since 1990. Using these data, temporal and spatial trends of $SO_2$, $PM_{10}$, $NO_2$, $O_3$, CO and $O_x(NO_2+O_3)$ were analyzed to characterize and evaluate implementing efficiency of air quality policy and regulations. Due to strict and effective policy to use cleaner fuels in late 1980s and 1990s, the primary pollutants, such as $SO_2$, CO, and $PM_{10}$ decreased sharply by early 2000s in all parts of Korea. After this period, their concentrations declined with much lower rates in most parts of Korea. In addition, isolated but noticeable numbers of places, especially in major ports, newly developing towns and industrial parks, sustained high levels or even showed further degradation. Despite series of emission control strategies were enforced since early 1990s, $NO_2$ concentrations haven't changed much till 2005, due to significant increase in number of automobiles. Nevertheless, we confirmed that the staggering levels of $NO_2$ and $PM_{10}$ improved evidently after 2005, especially in Seoul Metropolitan Area (SMA), where enhanced regulations for $NO_2$ and $PM_{10}$ emissions was imposed to automobiles and large emission sources. However, their decreasing trends were much lessened in recent years again as current air quality improvement strategies has been challenged to revise further. In contrast to these primary species, annual $O_3$, which is secondary product from $NO_2$ and volatile organic compounds (VOCs), has increased consistently with about 0.6 ppbv per year in every urban part of Korea, while yearly average of daily maximum 8-hour $O_3$ in summer season had a much higher rate of 1.2 ppbv per year. Increase of $O_3$ can be explained mainly by reductions of NO emission. Rising background $O_3$ in the Northeast Asia and increasing oxidizing capacity by changing photochemistry were likely causes of observed $O_3$ increase. The future air quality policy should consider more effective ways to lower alarming level of $O_3$ and $PM_{10}$.

• Journal of Korean Society of Transportation
• /
• v.21 no.1
• /
• pp.41-49
• /
• 2003

Marine traffic management could be defined as the implementation of managerial technical measures to improve vessel traffic safety. The managerial elements of vessel traffic management for ports and harbours or narrow channels include the total amount of traffic control, the vessel traffic separation scheme, speed restriction, traffic control by signals, the navigation information service and so forth. This research aims to quantify how much the traffic separation schemes(TSS) contribute to the alleviation effect of ship handling difficulty and to propose a design standard when the individual management measure is applied in an actual waterway. Traffic separation schemes have now been established in most of the major routes and congested waters of the world, and the number of collisions and groundings have often been dramatically reduced. In this part, the relationship between the alleviation of ship handling difficulty and the reduction of encounter figures among ships is quantitatively clarified by applying the ES model. As results of simulation analysis, it is recognized that a traffic separation system is most effective in the case of narrow width and heavy traffic volume. The centre buoy installation reduces about 1/4 of the alleviation of ship handling difficulty, TSS establishment 1/3, and design change to one-way traffic from two-way traffic reduces 1/2.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.5
• /
• pp.475-479
• /
• 2012

We present a novel polymer fabrication process involving direct UV patterning of a hyperbranched polymer, AEO3000. Compared to PDMS, which is the most widely used polymer in bioMEMS devices, the present polymer has advantages with regard to electrode integration and fast fabrication. We designed a four-chip microelectrofluidic bench having three electrical pads and two fluidic I/O ports. We integrated a microfluidic mixer and a cell separator on the bench to characterize the interconnection performance and sample manipulation. Electrical and fluidic characterization of the microfluidic bench was performed. The measured electrical contact resistance was $0.75{\pm}0.44{\Omega}$, which is small enough for electrical applications, and the pressure drop was 8.3 kPa, which was 39.3% of the value in the tubing method. By performing yeast mixing and a separation test in the integrated module on the bench, we successfully showed that the interconnected chips could be used for bio-sample manipulation.