• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.5
• /
• pp.740-746
• /
• 2009

Rusa deer are the only viable commercial tropical deer species for farming in the tropics because of their hardiness, adaptability and prolific characteristics. Twelve entire rusa stags were slaughtered according to halal procedure and used for carcass evaluation and cutability studies. Three carcass categories; large (46 to 55 kg), medium (36 to 45 kg) and small (25 to 35 kg) were developed for rusa stags. This study indicated that entire Moluccan rusa deer stags with mean live weight ranges from 50 to 80 kg and age groups of 15 to 29 months showed dressing percentage of 58 to 62%. Carcass conformation of rusa stags showed significantly (p<0.05) higher forequarters portion than hindquarters for medium (mean weight, 40.8 kg) and large (mean weight, 50.0 kg) carcass categories. The large carcass category was significantly (p<0.05) bigger in hindquarters portion (47.3% vs. 45.4%) than the medium carcass category. This study showed that medium and large carcass categories are more suitable for boneless cuts since the muscles were larger than small carcasses and easy for deboning. Stag carcasses showed higher proportion of the musculature in the high-priced areas of the carcass such as in round cuts. Bone-in cuts are more suitable for small carcasses since the muscles were smaller and difficult to debone (mean weight, 30.5 kg). About 90% of total deer carcasses in the small carcass category were developed into retail bone-in cuts (excluding 9.9% of breast, shank and trimming). The carcass characteristics and cutability information derived from this study can be used as a basis for a venison marketing strategy for deer farming and production in the tropics.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.11
• /
• pp.1630-1637
• /
• 2014

The objective of the study was to determine the quality and fatty acid profiles of mutton cuts purchased from rural and urban localities in South Africa. Five hundred and ten samples were collected in four seasons from both rural and urban shops and butcheries. Samples were immediately transported to the laboratory in cooler boxes with ice where the following physico-chemical characteristics of mutton were determined; meat pH, color ($L^*$, $a^*$, and $b^*$), cooking losses and Warner Braztler shear force and replicates stored at $-20^{\circ}C$ pending fatty acid analysis. Meat $L^*$ values were lowest ($24.7{\pm}0.49$) in winter and highest ($32.2{\pm}0.49$) in spring. The loin and sirloin cuts recorded the highest intramuscular fat whilst rib and leg cuts recorded the lowest intramuscular fat. In conclusion intramuscular fat, fatty acid profiles and physico-chemical quality of mutton were significantly affected by season and meat portion and not necessarily by the locality and class of shop.

• Journal of Food Hygiene and Safety
• /
• v.25 no.3
• /
• pp.251-257
• /
• 2010

The experiment was conducted to find out the nutritive value and microbial status of different wholesale cuts of goat carcass. The meat sample (4 cuts from each animal $\times$ 3 different age groups $\times$ 3 animals in each group = 36 samples) was obtained from 1-, 2-, and 3-year aged goats. The whole sale cuts were shoulder, rack, loin and leg of each goat carcass. To assess the quality of meat sample, the general appearance, color, smell, juiciness, proximate composition, pH, total bacteria, coliform bacteria, and yeast were studied. The mean pH value of different cuts ranges from 5.65-5.69 didn't differ significantly, but due to age differences the pH values (5.59-5.74) differed significantly (p < 0.01). The values of juiciness in different ages ranged from 32.24-42.10% which differed significantly (p < 0.01). The marbling of the cuts of rack portion was more pronounced than that of other cuts. The ranges of crude protein (CP) content of goat carcass (20.78-27.71%) differed significantly (p < 0.01) and leg portion contained higher CP than other portion. Fat contents of different cuts ranged from 2.66-11.47% differed significantly (P < 0.01). The moisture content of the carcass differed significantly which ranged from 69.20-73.31%. The ash content of the cuts of 1-year aged groups (0.99 $\pm$ 0.13%) was higher than that of other age groups and differed significantly (P < 0.01). The calcium (Ca) content did not differ significantly. The phosphorus (P) content was higher in one year old goat (0.15 $\pm$ 0.03%) than that of the goats of other ages. The total viable count (TVC) content of microorganisms ranging from 5.05-5.15 log cfu/g at different ages did not differ significantly. The coliform count (CC) of different cuts differed significantly (P < 0.01) which ranged from 2.56-3.05 log cfu/g; it also differed significantly (P < 0.05) in different ages (2.79-2.84 log cfu/g) and was higher in 1 year old goat carcass. The yeast count differed significantly in different cuts (P < 0.01) and ages (P < 0.05). From the study it is concluded that the age and different wholesale cuts have direct influence on quality of goat carcass.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.3
• /
• pp.8-15
• /
• 2004

A significant error in the end milling processes is generated due to using slender tools of which the strengths are not sufficient. In order to obtain the desired machining accuracy, therefore, it is general that at first the rough cut is implemented, then the finish cut is followed. The rough cut eliminates large volume and the finish cut does the remained part. This remaining portion after the rough cut is called as the finish allowance. Larger finish allowances make it hard to get precise dimensions at a following finish cut. Smaller finish allowances are helpful for good dimension, but it sometimes is responsible for inferior surface qualities and over cuts. This study suggests a guidance for the optimum finish allowance for machining accuracy improvement, in which the rough cuts are regulated to remain the desired margins without any over cuts. Some experiments were carried out with various cutting conditions including the change of tool strengths and depth of cuts, and also extended to up millings as well as down millings.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.9
• /
• pp.1309-1316
• /
• 2015

In this paper, weight, carcass dressing, weights of the primary cuts, weights of the physical components of the primary cuts, and weights of the main commercial cuts of 66 $Purun{\tilde{a}}$ animals, of which 33 were bulls and 33 were steers were evaluated. These animals, with an average age of 19 months at the beginning of the experiment, were finished in a feedlot system during 116 days, and were fed with diets containing three levels of concentrate (0.8%, 1.1%, and 1.4% of body weight). The concentrate was formulated with 25% soybean meal, 73% ground corn grain, 1% of a mineral mix, and 1% of limestone. The interaction between sexual groups and the concentrate level was not significant for any of the variables. Likewise, no effect of the concentrate level was detected on the same variable traits. The bulls demonstrated higher hot carcass weights (265.1 vs 221.7 kg) and a higher proportion of forequarter (38.4% vs 36.1%) however the steers presented with higher proportions of side (19.7% vs 18.5%) and hindquarter (44.2% vs 43.1%). The bulls produced higher yields of muscle in the three primary cuts, there by resulting in higher yields of edible portions of the carcass. The bulls also produced higher weights of tenderloin, knuckle, topside, flat, eye round, rump, and rump cover. The finishing of young bulls in feedlot is to be recommended, since the animals produce carcasses with higher amounts of edible meat and higher yields of commercial cuts, thus allowing for a better price for the carcass. Low concentrate level could be used due to the lower cost of production for farmers.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2004.10a
• /
• pp.503-510
• /
• 2004

One of the methods improving the seismic behavior of a structure is the frame with reduced beam section (RBS) which cuts a segment of flanges of the beam near the beam-to-column connection so that the section with reduced flanges has smaller flexural strength than the beam end. It is difficult to analyze the RBS frame because RBS portion has circular-cut type flange. And inelastic response of the steel frame with the RBS is very sensitive to the RBS model. In this paper, the analytical models of RBS portion are investigated and the results of the inelastic analysis for RBS analytical models are compared and then the analytical model for RBS is determined based on the results of inelastic analysis. Inelastic behavior of the RBS frame and its dynamic characteristics are investigated for selected analytical model of RBS.

• Proceedings of the KSPS conference
• /
• 1996.10a
• /
• pp.343-348
• /
• 1996

This paper examines the contribution of vocalic information (after the onset of voicing) to the perception of Korean alveolar stops: the aspirated /$t^{h}$/, the lenis /t/, and the fortis /$t^{*}$/. These stops have been analyzed as differing in VOT (Abramson & Lisker, 1964), the glottal width or aspiration (Kim, 1970), and F0 and intensity build-up (Han & Weitzman, 1970). These studies focused on the articulatory and acoustic qualities of the consonants and often assumed that the consonantal portion before the onset of voicing plays the main role in maintaining the three-way distinction. In contrast, the role of the following vowels was given less attention. In order to investigate the contribution of the following vowels, a perceptual study was conducted using stimuli cross-spliced from three naturally produced syllables [$t^{h}al$] 'mask', [tal] 'moon', and [$t^{*}al$]) 'daughter'. Stimuli were presented to 12 Korean listeners for identification. Each subject responded to a total of 486 tokens. The results show that vowels play the primary role when the cut occurs at the star of voicing. Even with cuts at 10 ms and 40 ms into voicing, the following vowel still plays a clear role. This suggests that vowels carry the important information for distinguishing the three stops.

• Korean Journal of Poultry Science
• /
• v.29 no.1
• /
• pp.51-57
• /
• 2002

This study was conducted to investigate the chemical composition in different portions of domestic broiler meat. The broilers were obtained from slaughtering house, where the scale of slaughtering was more than 50,000 heads per day. The carcasses were separated by cutting into 7 portions such as wing, drumstick, drummette, breast, skin, thigh, and tenderloin. Moisture contents of drummette and thigh were 73.37% and 73.19%, whereas those of drumstick and wing were 75.65% and 75.76%, respectively. The portions of breast parts contained 4.20% higher protein, but 4.17% lower fat than those of leg parts. Overall mineral contents were relatively high for thigh when compared with breast. The content of Fe was higher by 1.8 folds(7.3ppm) in thigh than that in tenderloin(4.0ppm) and the content of Zn was higher in drummette than that in tenderloin. For amino acid compositions, the tenderloin contained more glutamic acid and methionine than the other portion meats. The portions of drumstick(3.97mg/g) and thigh (3.24mg/g) were higher in collagen contents than the other Parts. Wing portion had the lowest collagen content of 2.64mg/g, which was due to the removal of its skin.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.10
• /
• pp.1387-1393
• /
• 2014

This study aimed to estimate genetic correlation between carcass grading and retail productivity traits and to estimate the correlated response on retail productivity traits through selection for carcass grading traits in order to assess the efficacy of indirect selection. Genetic parameters were estimated with the data from 4240 Hanwoo steers using mixed models, and phenotypes included carcass weight (CWT), back fat thickness (BFT), eye muscle area (EMA), marbling (MAR), and estimated lean yield percentage (ELP) as the carcass grading traits, and weight and portion of retail cuts (RCW and RCP), trimmed fats (TFW and TFP) and trimmed bones (TBW and TBP) as the lean productivity traits. The CWT had positive genetic correlations with RCW (0.95) and TFW (0.73), but its genetic correlation with RCP was negligible (0.02). The BFT was negatively correlated with RCP (-0.63), but positively correlated with TFW and TFP (0.77 and 0.70). Genetic correlations of MAR with TFW and TFP were low. Among the carcass grading traits, only EMA was positively correlated with both RCW (0.60) and RCP (0.72). The EMA had a relatively strong negative genetic correlation with TFW (-0.64). The genetic correlation coefficients of ELP with RCP, TFW, and TFP were 0.76, -0.90, and -0.82, respectively. These correlation coefficients suggested that the ELP and EMA might be favorable traits in regulating lean productivity of carcass.

• Food Science of Animal Resources
• /
• v.22 no.4
• /
• pp.337-342
• /
• 2002

This study was carried out to investigate the feeding effect of by-products such as ginseng loaves(GL) and stem (GS) which had about 8% of crude saponin on pork carcass and meat quality characteristics when they were fed for 40 days. The ginseng leaves and stem were added in feed and the pigs were slaughtered at 10, 20, 30 and 40 days. The chilled carcass weight and trimmed fat contents were higher(86.50 kg) in the pork fed for 40 days. The yields of fore legs were higher in pork fed for 10 days(P<0.05) and there was no different in the yields of the other portion cuts such as shoulder, rib, loin, belly, hind legs and tenderlons. The incidence of percentages for grade A and B decreased as the feeding periods increased up to 40 days. The backfat thickness was lowest in carcasses from pigs fed up to 20 days(P<0.05). The L values were highest in pork fed up to 30 days(50.22) and lowest(46.91) for pork fed 10 days. The incidence of PSE pork was low in pork fed for 20 days when compared to other feeding days. Cooking loss was lowest and water holding capacity(WHC) was highest in pork fed GL and GS stem, respectively. However, the analysis for accumulation contents of saponin and functionality in pork fed GL and GS is needed in the future research.