• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.5
• /
• pp.475-485
• /
• 2010

This paper proposes a novel concept for a microstrip resonator that can function as a filter and as an antenna at the same time. The proposed structure consists of an outer ring, an open loop-type inner ring, a circular patch, and three ports. The frequencies where the proposed structure works as a filter and as an antenna, respectively, are determined primarily by the radius of the inner ring and the circular patch. The measured results show that, when the microstrip resonator operates as a filtering device, this filter has about 15.1 % bandwidth at the center frequency of 0.63 GHz and a minimum insertion loss of 1.5 dB within passband. There are three transmission zeros at 0.52 GHz, 1.14 GHz, and 2.22 GHz. In the upper stopband, cross coupling - taking place at the stub of the outer ring - and the open loop-type inner ring produce one transmission zero each. The circular patch generates the dual-mode property of the filter and another transmission zero, whose location can be easily adjusted by altering the size of the circular patch. The proposed structure works as an antenna at 2.7 GHz, showing a gain of 3.8 dBi. Compared to a conventional patch antenna, the proposed structure has a similar antenna gain. At the resonant frequencies of the filter and the antenna, high isolation(less than -25 dB) between the filter port and the antenna port can be obtained.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.11
• /
• pp.63-70
• /
• 2001

We demonstrate the MMIC (monolithic microwave integrated circuit) frequency doublers generating stable and low-cost 29 GHz local oscillator signals from 14.5 GHz input signals. These devices were designed and fabricated by using the M MIC integration process of $0.1\;{\mu}m$ gate-length PHEMTs (pseudomorphic high electron mobility transistors) and passive components. The measurements showed S11 or -9.2 dB at 145 GHz, S22 of -18.6 dG at 29 GHz and a minimum conversion loss of 18.2 dB at 14.5 GHz with an input power or 6 dBm. Fundamental signal of 14.5 GHz were suppressed below 15.2 dBe compared to the second harmonic signal at the output port, and the isolation characteristics of fundamental signal between the input and the output port were maintained above :i0 dB in the frequency range 10.5 GHz to 18.5 GHz. The chip size of the fabricated MMIC frequency doubler is $1.5{\times}2.2\;mm^2$.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.13 no.1
• /
• pp.16-22
• /
• 1976

Broadband operation of Y-junction microstrip circulator withlnonreciprocal device is predicteg by Rosenbaum using Bosma's Green function analysis. The anslysis has been modified to enable the scattering matrix and therefore the circulator bandwidth, to be found. The width of the coupling transmission lines is found to be a significant design parameter${\psi}$. A comparison of experimental and theoretical results for the 3-port junction shows that wide lines and a smaller 7.5U than usual disk radius can be used to obtain broadband operation. Circulator operates in the frequency band 5-11 GHz. The obtained maximum insertion loss is 0.5dB and the isolation is more than 15dB.

• ETRI Journal
• /
• v.30 no.4
• /
• pp.526-534
• /
• 2008

This paper presents a fully integrated 0.13 ${\mu}m$ CMOS MB-OFDM UWB transmitter chain (mode 1). The proposed transmitter consists of a low-pass filter, a variable gain amplifier, a voltage-to-current converter, an I/Q up-mixer, a differential-to-single-ended converter, a driver amplifier, and a transmit/receive (T/R) switch. The proposed T/R switch shows an insertion loss of less than 1.5 dB and a Tx/Rx port isolation of more than 27 dB over a 3 GHz to 5 GHz frequency range. All RF/analog circuits have been designed to achieve high linearity and wide bandwidth. The proposed transmitter is implemented using IBM 0.13 ${\mu}m$ CMOS technology. The fabricated transmitter shows a -3 dB bandwidth of 550 MHz at each sub-band center frequency with gain flatness less than 1.5 dB. It also shows a power gain of 0.5 dB, a maximum output power level of 0 dBm, and output IP3 of +9.3 dBm. It consumes a total of 54 mA from a 1.5 V supply.

• Journal of electromagnetic engineering and science
• /
• v.8 no.3
• /
• pp.129-133
• /
• 2008

An integrated passive device(IPD) technology by semi-insulating(SI)-GaAs-based fabrication has been developed to meet the ever increasing needs of size and cost reduction in wireless applications. This technology includes reliable NiCr thin film resistor, thick plated Cu/Au metal process to reduce resistive loss, high breakdown voltage metal-insulator-metal(MIM) capacitor due to a thinner dielectric thickness, lowest parasitic effect by multi air-bridged metal layers, air-bridges for inductor underpass and capacitor pick-up, and low chip cost by only 6 process layers. This paper presents the Wilkinson power divider with excellent performance for digital cellular system(DCS). The insertion loss of this power divider is - 0.43 dB and the port isolation greater than - 22 dB over the entire band. Return loss in input and output ports are - 23.4 dB and - 25.4 dB, respectively. The Wilkinson power divider based on SI-GaAs substrates is designed within die size of $1.42\;mm^2$.

• Journal of Advanced Navigation Technology
• /
• v.26 no.1
• /
• pp.15-21
• /
• 2022

In this paper, we propose a method to implement an unequal power divider with different complex termination impedances for different output power ratios. The proposed method was designed using a matching the terminated complex impedances of the output port using only the transmission line, and presented an isolation circuits to satisfy the isolation characteristic between the terminating complex impedance ports. To prove the feasibility of this method, an unequal power divider with different load complex impedances with a splitting ratio k² = 3 dB and 1.7 dB and an unequal power divider with different complex termination impedances of all ports with a splitting ratio k² = 3 dB was designed at a center frequency of 2 GHz, and it was confirmed that the measured results of the electrical characteristics agree well the simulation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.12
• /
• pp.949-954
• /
• 2012

The K-PCS and W-CDMA dual band dielectric duplexer and bandpass filters have been designed and fabricated. The dual band duplexer consists of the separate monoblock K-PCS and W-CDMA duplexers using common antenna port. The coupling capacitance and I/O impedance matching have been designed to minimize the cross interference between the bands. Isolations of crosspoint between Tx and Rx in K-PCS and W-CDMA dualband were about 47 dB and 100 dB, respectively. On the other hand, isolations of Tx and Rx in K-PCS and W-CDMA were about 66 dB and 65 dB, respectively. The difference between 47 dB and 100 dB originated from the different center frequencies in Tx and Rx of K-PCS and W-CDMA bands. The coupling capacitance of the bandwidth, I/O capacitance of I/O matching and impedance matching, and various capacitances were important role to fabricate the dielectric duplexer and bandpass filters.

• Journal of Advanced Navigation Technology
• /
• v.6 no.3
• /
• pp.251-257
• /
• 2002

Design and characteristic improvement of existing folded dipole antenna is presented to adopt W-CDMA(1.885~2.170 GHz) wideband antenna radiators. The antenna structure has +/- 45 degrees dual polarization. In order to overcome the narrow bandwidth and low gain characteristic typical of the microstrip antenna, double layered structure was employed. The antenna achieved below - 20 dB reflection coefficients each ports, - 20 dB of port isolation, above 7 dBi of gain, providing evidence that the proposed design can be used in the W-CDMA service frequency band antenna.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.10A
• /
• pp.958-964
• /
• 2005

In this thesis, the matching network at the local oscillator port of the sub-harmonic mixer is optimized for reducing the conversion loss. A downconverter for point to point system applications is designed and fabricated using the such sub-harmonic mixer. The sub-harmonic mixer achieved the conversion loss of 11.8 dB at the 12 dBm input power of the local oscillator and the isolation of less than -40 dB. The downconverter achieved the IF output power flatness of 2 dB and the total noise figure of 5.9 dB.

• Journal of IKEEE
• /
• v.3 no.1 s.4
• /
• pp.69-78
• /
• 1999

In this paper, direct conversion receiver was designed to even harmonic anti-paralled diode pair ring mixer. Using a second harmonic component of LO instead of LO signal and RF signal are mixed by SHP(Sub Harmonic Pumped) mixer with anti-parallel diode pair. Canceling the harmonics of LO signal in ring mixer, SHP mixer using anti-parallel diode pair could mostly reduce the radiation of LO signal through a input port the most, good isolation characteristic, and low spurious characteristic by LO signal was shown over broad band. The produced SHP mixer showed LO/IF, RF/IF and LO/RF isolation was 24.6dB,36.2dB and 22.5dB respectively. And conversion loss was measured 15.6dB, IF output -35.6dBm with -20dBm RF input and 5.5dBm LO signal. 1dB compression point of If signal, in respect to RF signal, was found at the 0dbm RF signal.