• 대한안전경영과학회지
• /
• 제11권2호
• /
• pp.1-8
• /
• 2009

The port, differently from general working place, is a closed area to execute security, customs, and quarantine procedures. The loading and unloading is being done differently by cargoes, ships, berths, and equipments. To load and unload a lot of equipments and different types of labor are required, in which work flow is very complicated. As above mentioned the port is very unique and deteriorated working place including danger. Now frequency of cargo handling accidents in port is highest for the second time among all industries. The purpose of this study is to propose ways to analyze and establish the preventive measure for cargo handling accidents in port. We have collected 45 accidents happened at Incheon Port during the period from 2007 to 2009. And the result of analysis, we proposed the new safety management system and safety education to reduce cargo handling accidents and to promote the quality of cargo handling in Incheon Port. Within the framework of effective safety management of cargo handling in port, this study will help to revise and establish system, education, and standard working manual with respect to the port loading and unloading system.

• 한국항만학회지
• /
• 제3권1호
• /
• pp.35-55
• /
• 1989

Today, about 99% of total import and export cargo in Korea is being transported through the port. The general trends of cargo handling show increases in capacity and speed, In order to cope with these trends, it is not only required to raise the efficiencies of port operation and function but also necessary to decide the optimal amount of the skilled labor force for cargo handling in the port. Cargo handling in the port is basically relied on the cargo handling facilities. Therefore, it is very important to reserve the amount of labor force for cargo handling system has been developed up to a certain level but the personnel management system which is the superior structure has not been followed well. In this study, therefore, we show a method to determine the required amount of labor force for cargo handling considering the amount of cargo and type of cargo handling work per each cargo, and the optimal amount labor force in cope with the fluctuation of the basic cargo handling labor force with respect to the time of in and out cargo flow in the viewpoint of minimizing the expences due to reservation of extra labor force than needed and firing employment of labor force using the Dynamic Programming. The derived algorithm is introduced into the computer simulation for Pusan port with the analyzed real data such as amount of cargo handling in the port with respect to working hour, cargo capacity, working step, the ratio of cargo handling facility and actual number of workers and we estimated the required labor force. As a result of analysis the labor force of Pusan port showed the over-employment such as maximum 21.4%, minimum 8.2% when we assumed that the averages of actual working hours and days were 8 hours in a day and 20 day in a month.

• 한국항해학회지
• /
• 제15권3호
• /
• pp.13-24
• /
• 1991

This paper aims to determining the optimal capacity of Pusan port in view point of Container Physical Distribution cost. It has been established a coast model of the container physical distribution system in Pusan port is composed of 4 sub-systems and in-land transport system. Cargo handling system, transfer & storage system and in-land transport system, and analyzed the cost model of the system. From this analysis, we found that the system had 7 routes including in-land transport by rail or road and coastal transport by feeder ship between Pusan port and cargo owner's door. Though railway transport cost was relatively cheap, but, it was limited to choose railway transport routes due to the introducing of transport cargo allocation practice caused by shortage of railway transport capacity. The physical distribution ost for total import & export container through Pusan port was composed of 4.47% in port entring cost, 12.98% in cargo handling cost, 7.44% in transfer & storage cost and 75.11% in in-land transport cost. Investigation in case of BCTOC verified the results as follows. 1) The optimal level of one time cargo handling was verified 236VAN (377TEU) and annual optimal handling capacity was calculated in 516, 840VAN(826, 944TEU) where berth occupancy is $\rho$=0.6 when regardless of port congestion cost, 2) The optimal level of one time cargo handling was verified 252VAN (403TEU) and annual optimal handling capacity was calculated in 502, 110VAN (803, 376TEU) where berth occupancy is $\rho$=0.58 when considering of port congestion cost.

• 대한안전경영과학회지
• /
• 제8권3호
• /
• pp.27-36
• /
• 2006

The port, differently from general working place, is a closed area to execute security, customs, and quarantine procedures. The loading and unloading is being done differently by cargoes, ships, berths, and equipments. To load and unload a lot of equipments and different types of labor are required, in which work flow is very complicated. As above mentioned the port is very unique and deteriorated working place including danger. The purpose of this thesis is to propose ways to analyze and establish the preventive measure for cargo handling accidents in port. We have collected 923 accidents happened at Incheon Port during the period from 1994 to 2003. And to analyze and establish the preventive measure we have employed an advanced 6sigma DMAIC technology presently in spotlight as the best tool for management innovation. For the purpose of effective safety management of cargo handling in port, this thesis will help to revise and establish the law, system, standard, and standard working manual with respect to the port loading and unloading system. Now frequency of cargo handling accidents in port is highest for the second time among all industries, so we proposed the new safety management system to substitute port safety committee and to take full charge of safety in Ministry of Maritime Affairs and Fisheries.

• 한국시뮬레이션학회논문지
• /
• 제5권1호
• /
• pp.53-66
• /
• 1996

Container handling facilities in Korean ports have increased rapidly according to Korean industrialization and the worldwide containerization. Over 98% of total containers handles in Korean ports are handled in Puan ports. This paper presents the estimation method of annual container handling capacity of container terminals by the computer simulation models. Simulation models are developed utilizing SIMAN IV simulation package. Annual handling capacity of real container terminals such as BCTOC and PECT was estimated by the proposed simulation models. Also, Annual handling capaicty of planned or expected terminals in Puan port was estimated. The comparisons between container forecast demand and estimated handling capacity of Pusan port from 1996 through 2001 were made. It showed that Pusan port will have over two million TEU handling capacity shortage during that period and will face enormous port congestion. Lastly, mid term and long-term capacity expansion plansof container terminals in korean ports were discussed.

• 한국항해항만학회지
• /
• 제26권2호
• /
• pp.161-166
• /
• 2002

컨테이너 처리량(CHC)은 항만의 능력을 나타내는 중요한 지표다. 그러나 중국항만의 컨테이너 처리능력에 대한 연구는 부족하며, 연구결과 또한 예측치와 실제치와의 차이가 크다. 이는 컨테이너처리량이 다양한 경제적인 측면을 내포하고 있고 예측모델의 선택이 매우 어렵다는데 기인한다. 대체로 지금까지 사용되어왔던 회귀분석, 신경망분석 등은 과거행태모델을 벗어나지 못하고 있어 경제체제나 항만물동량의 동태적변화에 대한 고려가 결여되어 있다. 따라서 본 논문에서는 동태적 보정인과모델을 사용한 동태적 예측법을 사용해 보았고 그 결과 보다 신뢰성이 높고 현실성이 있는 연구결과를 도출할 수 있었다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 춘계학술대회 논문집
• /
• pp.407-412
• /
• 2004

안벽의 하역능력 산정 문제는 총 개발 선석수, 배후 장치장 규모 등 항만의 총 개발규모를 결정짓는 매우 중요한 요소가 된다. 만일 1개 선석당 하역능력이 너무 낮게 산정된다면, 개발해야 할 선석의 수는 증가하게 되고, 더불어 낮은 하역능력에 적정하도록 장치장 규모가 작게 결정된다. 본 연구는 항만개발의 근거가 된 대기율, 선석점유율, 하역능력 등 정부계획과 실제 부산항의 실적을 비교ㆍ평가하여 원인을 분석한 후, 부산항 실적위주의 현실적인 크레인 대수 및 선석점유율 적용을 통해 하역능력을 재산정하는 데 목적이 있다.