• 전기화학회지
• /
• 제19권1호
• /
• pp.21-27
• /
• 2016

바나듐 레독스 흐름 전지는 황산 바탕용액 내 바나듐 이온을 함유하는 전해질을 활용하여 충전과 방전을 번갈아 운전하는 에너지 저장 장치 중 하나이다. 양극액엔 $V^{5+}$와 $V^{4+}$가 음극액엔 $V^{2+}$와 $V^{3+}$가 충전 또는 방전 모드에 따라 주로 존재하게 된다. 두 종류의 바나듐 용액이 혼액되는 것을 방지하기 위해 주로 수소이온교환막을 활용하여 전체 셀을 완성하게 된다. $V^{5+}$의 높은 산화력으로 현재 듀퐁사의 Nafion 117이 유력하나 바나듐 이온의 높은 크로스오버라는 단점을 극복해야 한다. 본 연구에서는 상기 단점을 극복할 뿐만 아니라 고가의 Nafion계 막의 가격을 저감하고 화학적 안정성을 지속적으로 유지하기 위해 다공성 폴리에틸렌 필름에 나피온 고분자를 함침하여 바나듐 레독스 흐름 전지용 복합막을 제조하였으며, 상용막인 Nafion 117과 성능을 비교 분석하였다. 복합막의 두께가 두꺼워질수록 함수율과 이온전도도가 증가 하였으나 Nafion 117에 비해 다소 낮은 성능을 확인하였으며, 바나듐 이온의 투과성은 현저히 줄어드는 것을 확인할 수 있었다. 충 방전 실험 결과, $190{\mu}m$ 두께의 나피온 복합막이 가장 좋은 성능을 보였으며, Nafion 117과 비교하여 전압효율은 낮아졌지만, 충 방전 효율이 높아져 전체적인 에너지 효율은 비슷하게 측정되었다. 또한 6.4% 중량비에 해당하는 지지체만큼의 과불소화 술폰산 고분자의 중량이 감소함에 따라 비용을 절감할 수 있었으며, 성능면에서는 바나듐 이온의 투과도를 낮추어 자가 방전 속도를 저하시키면서 충 방전 용량의 감소가 느려지는 것을 알 수 있었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.150-153
• /
• 2009

Anion exchange polymer electrolyte pore-filling membranes consisting of the whole hydrocarbon materials were prepared by photo polymerization with various quaternary ammonium cationic monomers and characterized on the properties for applying to solid alkali fuel cell (SAFC). Hydrocarbon porous substrates such as polyethylene were used for the preparation of the pore-filling membranes. The hydroxyl ion conductivity of the polymer electrolyte membranes prepared in this research was dependent on the composition ratio of an electrolyte monomer and crosslinking agents used for polymerization. Furthermore, these pore-filling membranes have commonly excellent properties such as smaller dimensional affects when swollen in solvents, higher mechanical strength, lower fuel crossover through the membranes, and easier preparation process than those of traditional cast membranes.

• 한국세라믹학회지
• /
• 제50권6호
• /
• pp.451-453
• /
• 2013

Porous ceramic membranes consisting of $Ce_{1-x}Y_xO_{2-{\delta}}$ were developed for hydrogen permeation tests. Various amounts (x = 0, 0.05, 0.1, 0.2) of yttrium were doped to ceria to study the effect of yttrium doping on ceria membranes on various properties, including hydrogen permeability. $Ce_{1-x}Y_xO_{2-{\delta}}$ powder was synthesized by the sol-gel method. These membranes were fabricated by pressing and sintering at $1300^{\circ}C$ for 6 h. As the amount of yttrium increased, the grain size of the membrane decreased. Hydrogen permeability was improved as the yttrium content increased. Selective permeability of hydrogen compared to CO is explained by electric conductivity. As the temperature rose, both the hydrogen perm-selectivity and electric conductivity on $Ce_{0.8}Y_{0.2}O_{1.9}$ improved.

• 멤브레인
• /
• 제15권2호
• /
• pp.105-113
• /
• 2005

표면 개질한 다공성 금속 지지체에 초음파 분무 열분해법을 이용하여 silica막을 합성하고, 고온 기체 선택 투과 분리 특성을 조사하였다. Tetraethyl orthosilicate (TEOS)를 전구체로 하여 지지체 세공을 통한 감압 진공을 하면서 873K에서 표면에 defect 없이 균일한 양질의 silica막이 형성되었다. 투과 온도 523 K에서 silica막의 수th/질소 및 수증기/메탄을 분리 계수가 각각 17 및 16 정도의 우수한 선택 투과 성능을 나타냈다. 다공성 금속 지지체의 불균일한 기공에 silica 분체 및 $\gamma-alumina$층을 중간층으로 도입하고, 그 위에 열분해법에 의한 silica를 합성한 결과, Knudsen 확산에 의한 투과 영역의 세공이 완전히 제거되어 높은 수소 및 수증기 선택성을 가지는 복합 막이 형성되었다.

• Korean Chemical Engineering Research
• /
• 제52권3호
• /
• pp.340-346
• /
• 2014

Continuous and dense ZIF-7 membranes were successfully synthesized on ${\alpha}-Al_2O_3$ porous substrate via two-step crystallization technique. ZIF-7 seeding layer was first deposited on porous ${\alpha}-Al_2O_3$ substrate by in-situ low temperature crystallization, and then ZIF-7 membrane layer can be grown through the secondary high-temperature crystallization. Two synthesis solutions with different concentration were used to prepare ZIF-7 seeding layer and membrane layer on porous ${\alpha}-Al_2O_3$ substrate, respectively. As a result, a continuous and defect-free ZIF-7 membrane layer can be prepared on porous ${\alpha}-Al_2O_3$ substrate, as confirmed by scanning electron microscope. XRD characterization shows that the resulting membrane layer is composed of pure ZIF-7 phase without any impurity. A single gas permeation test of $H_2$, $O_2$, $CH_4$ or $CO_2$ was conducted based on our prepared ZIF-7 membrane. The ZIF-7 membrane exhibited excellent H2 molecular sieving properties due to its suitable pore aperture and defect-free membrane layer.

• Bulletin of the Korean Chemical Society
• /
• 제35권2호
• /
• pp.349-352
• /
• 2014

Anodic alumina oxide (AAO), a self-ordered hexagonal array, has various applications in nanofabrication such as the fabrication of nanotemplates and other nanostructures. In order to obtain highly ordered porous alumina membranes, a two-step anodization or prepatterning of aluminum are mainly conducted with straight electric field. Electric field is the main driving force for pore growth during anodization. However, impurities in aluminum can disturb the direction of the electric field. To confirm this, we anodized two different aluminum foil samples with high purity (99.999%) and relatively low purity (99.8%), and compared the differences in the surface morphologies of the respective aluminum oxide membranes produced in different electric fields. Branched pores observed in porous alumina surface which was anodized in low-purity aluminum and the size; dimensions of the pores were found to be usually smaller than those obtained from high-purity aluminum. Moreover, anodization at high voltage proceeds to a significant level of conversion because of the high speed of the directional electric field. Consequently, anodic alumina membrane of a specific morphology, i.e., meshed pore, was produced.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1999년도 The 7th Summer Workshop of the Membrane Society of Korea
• /
• pp.39-42
• /
• 1999

Perfluoropolymers represent the ultimate resistance to hostile chemical environments and high service temperature, attributed to the presence of fluorine in the polymer backbone, i.e. to the high bond energy of C-F and C-C bonds of fluorocarbons. Copolymers of Tetrafluoroethylene (TEE) and 2, 2, 4Trifluoro-5Trifluorometoxy- 1, 3Dioxole (TTD), commercially known as HYFLON AD, are amorphous perfluoropolymers with glass transition temperature (Tg)higher than room temperature, showing a thermal decomposition temperature exceeding 40$0^{\circ}C$. These polymer systems are highly soluble in fluorinated solvents, with low solution viscosities. This property allows the preparation of self-supported and composite membranes with desired membrane thickness. Symmetric and asymmetric perfluoropolymer membranes, made with HYFLON AD, have been prepared and evaluated. Porous and not porous symmetric membranes have been obtained by solvent evaporation with various processing conditions. Asymmetric membranes have been prepared by th wet phase inversion method. Measure of contact angle to distilled water have been carried out. Figure 1 compares experimental results with those of other commercial membranes. Contact angles of about 120$^{\circ}$for our amorphous perfluoropolymer membranes demonstrate that they posses a high hydrophobic character. Measure of contact angles to hexandecane have been also carried out to evaluate the organophobic character. Rsults are reported in Figure 2. The observed strong organophobicity leads to excellent fouling resistance and inertness. Porous membranes with pore size between 30 and 80 nanometers have shown no permeation to water at pressures as high as 10 bars. However high permeation to gases, such as O2, N2 and CO2, and no selectivities were observed. Considering the porous structure of the membrane, this behavior was expected. In consideration of the above properties, possible useful uses in th field of gas- liquid separations are envisaged for these membranes. A particularly promising application is in the field of membrane contactors, equipments in which membranes are used to improve mass transfer coefficients in respect to traditional extraction and absorption processes. Gas permeation properties have been evaluated for asymmetric membranes and composite symmetric ones. Experimental permselectivity values, obtained at different pressure differences, to various single gases are reported in Tab. 1, 2 and 3. Experimental data have been compared with literature data obtained with membranes made with different amorphous perfluoropolymer systems, such as copolymers of Perfluoro2, 2dimethyl dioxole (PDD) and Tetrafluorethylene, commercialized by the Du Pont Company with the trade name of Teflon AF. An interesting linear relationship between permeability and the glass transition temperature of the polymer constituting the membrane has been observed. Results are descussed in terms of polymer chain structure, which affects the presence of voids at molecular scale and their size distribution. Molecular Dyanmics studies are in progress in order to support the understanding of these results. A modified Theodoru- Suter method provided by the Amorphous Cell module of InsightII/Discover was used to determine the chain packing. A completely amorphous polymer box of about 3.5 nm was considered. Last but not least the use of amorphous perfluoropolymer membranes appears to be ideal when separation processes have to be performed in hostile environments, i.e. high temperatures and aggressive non-aqueous media, such as chemicals and solvents. In these cases Hyflon AD membranes can exploit the outstanding resistance of perfluoropolymers.

• 멤브레인
• /
• 제19권2호
• /
• pp.113-121
• /
• 2009

실리카 입자를 기공 형성제로 사용하여 물리적 강도와 단백질 결합용량이 높은 다공성 키토산 및 키틴 친화 막을 제조하였다. 키토산 친화 막의 BSA 단백질 결합용량은 최대 21.8mg/mL이었으며, 키틴 친화 막의 lysozyme 효소 결합용량은 최대 26.1mg/mL이었다. 제조된 다공성 키토산 및 키틴 친화 막을 사용하여 단백질 용액의 loading 유량, loading 양 및 농도 변화에 따른 BSA와 lysozyme의 친화 막 여과 크로마토그래피 분리 실험을 수행하였다. 친화 막 여과 크로마토그래피 분리 실험을 통해 얻어진 loading/washing/elution의 단계로 구성된 일련의 크로마토그램으로부터 단백질 용출량과 결합수율을 구하였다. 키토산 및 키틴 친화 막에의 BSA 및 lysozyme 단백질의 결합량과 결합수율은 loading용액의 유량이 작을수록, 주입량 및 농도가 클수록 증가하였다. 이 결과로부터 실리카 입자를 기공 형성제로 사용하여 제조된 다공성 키토산 및 키틴 막은 단백질의 대규모 여과 크로마토그래피 분리를 위한 친화 막으로서 효과적인 활용이 기대된다.

• Membrane and Water Treatment
• /
• 제5권1호
• /
• pp.41-56
• /
• 2014

A series of microporous PVDF membranes were prepared by isothermal immersionprecipitation of PVDF/TEP casting dopes in both soft and harsh coagulation baths. Morphologies of the membranes' top surfaces were found to depend strongly on the bath strength, which could be controlled by the TEP content in the bath. By changing the bath gradually from pure water to 70% TEP, the top surface evolved from a dense skin-like (asymmetric) to a totally open porous morphology (symmetric). The latter structure could similarly be obtained by precipitation of the same dope in an alcoholic bath, e.g., 1-butanol. Membrane distillation processes to desalt sodium chloride aqueous solutions were conducted using various prepared membranes and two commercial microporous membranes, PTFE (Toyo, Japan, code: J020A330R) and PVDF (GE, USA, code: YMJWSP3001). The permeation fluxes were compared and correlated with the morphologies of the tested membranes.

• Korean Membrane Journal
• /
• 제6권1호
• /
• pp.10-15
• /
• 2004

We developed a water-selective ceramic composite membrane for use as a dehydration membrane reactor for dimethylether (DME) synthesis from methanol. The membranes were modified on the porous stainless steel support by the sol-gel method accompanied by a suction process. The improved membrane modification process was effective in increasing the vapour permselectivity by removal of defects and pinholes. The optimized alumina/silica composite membrane exhibited a water permeance of 1.14${\times}$10$^{-7}$ mol/$m^2$.sec.Pa and a water/methanol selectivity of 8.4 at permeation temperature of 25$0^{\circ}C$. The catalytic reaction for DME synthesis from methanol using the membrane was performed at 23$0^{\circ}C$, and the reaction conversion was compared with that of the conventional fixed-bed reactor. The reaction conversion of the membrane reactor was much higher than that of the conventional fixed-bed reactor. The reaction conversion of the membrane reactor and the conventional fixed-bed reactor was 82.5 and 68.0%, respectively. This improvement of reaction efficiency can last if the water vapour produced in the reaction zone is removed continuously.