• Archives of Plastic Surgery
• /
• 제35권2호
• /
• pp.201-204
• /
• 2008

Purpose: Now the CT scanner and PACS program proved to be an excellent instrument for detection and localization of most facial foreign bodies above certain minimum levels of detectability. The severity of injury in penetrating trauma on the face is often underestimated in physical examination. Wood, with its porous consistency and organic nature, provides a good medium for microbial agents. This is a report of our recent experience with wooden foreign bodies in the parotid gland imaged with CT. Methods: A 9-year-old boy was referred for evaluation of possible retained foreign body within his face. One day earlier, he had fallen, face down approximately 1 miter onto ground. He had subsequently undergone an exploration of his right parotido-masseteric area at an outside hospital with repair of a right facial laceration. Enhanced 2 mm axial and coronal CT scans were obtained through the face. Axial and coronal CT images were obtained with a General Electric(Milwaukee, Wis) 9800 CT scanner at 130 kV, 90 mA, with a 2 mm section thickness. Results: We finally decided the linear "gas" attenuation was a foreign body because of its linear configuration, which did not conform to that of an anatomic structure, and on the basis of articles that described a wood foreign body in the orbit as having the appearance of air. We found that wood was hypoattenuating($-464{\pm}27HU$). Conclusion: We recommend this type of software program for CT scanning for any patient with an injury on the face in which a foreign body is suspected.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제11권1호
• /
• pp.101-116
• /
• 1989

Proplast and Porous Polyethylene which have porous structures as low-modulus polymers have been recently used in maxillofacial plastic and reconstructive surgery. The purpose of this study was to compare the response of adajacent tissue, new bone formation and stability after augmentation by differen methods of subperiosteal graft using proplast and purous polythylene in rabbit mandible. The augmentation procedure was carried out by dividing into two groups, A and B. A group consisted of subperiosteal graft on the cortex, and the other B group was made up only graft following artificial decortication in the mandibular body of rabbit. The experimental animals were sacrificed on the 1st, 2nd, 4th and 8th week after grafting for macroscopic and light microscopic examination. The samples extracted at the 6th postgrafting week were also used for biometric testing and scanning electron microscopic examination. The results obtained from this study were as follows : 1. Macroscopically, infection of graft site, deformation and migration of graft material were not observed in all experimental groups. 2. B group showed more rapid and increased bone formation and the greater stability than A group, and tissue response was similar to each other. 3. In the tissue response, macrophages and cellular infiltrations were observed in Proplast group, but few in PHDPE group. 4. In bone formation of A group, Proplast group showed no bone formation until the 8th week, but PHDPE group showed small quantity of osteoid tissue from the 2nd week and appositional bone growth with new bone formation at the 8th week. 5. In bone formation of B group, both Proplast and PHDPE group showed bone formation, but PHDPE group showed more rapid and larger bone formation. 6. In pattern of bone formation, Proplast group mainly showed appositional bone growth pattern connected with graft site. On the other hand, PHDPE group showed mixed pattern of new bone formation in the pore connective tissue with appositional bone growth from graff site. 7. The maximum mean values of shear stress were serially $111.3gf/mm^{2}$ in PHDPE of B group, $84.8gf/mm^{2}$ in PHDPE of A group, $32.9gf/mm^{2}$ in Proplast B group, and $15.7gf/mm^{2}$ in Proplast of A group. From above results, It was suggested that the capacity of bone formation and stability between bone and graft material were dependent on the pore size and structure of graft material itself, the state of graft site and tissue response.

• 한국세라믹학회지
• /
• 제41권7호
• /
• pp.518-527
• /
• 2004

본 연구에서는 다공성 알루미나 기판의 기공 형상 개질을 통해서 필터의 집진 효율, 성능 및 내구성 향상을 위한 공정에 대해서 다루었다. 탄화규소 휘스커를 통한 기공 개질을 위해서 모재의 표면뿐만 아니라 기공 내부에까지 균일한 탄화규소 휘스커를 얻고자 화학 기상 침착법(Chemical Vapor Infiltration： CVI)을 사용하여 실험을 진행하였다. 실험결과 증착 온도와 증착 위치 및 입력 기체비와 같은 공정 조건의 변화에 따라 증착 경향에 확연한 차이를 나타내는 것을 알 수 있다. 다시 말해 첫째, 시편의 관찰 위치가 표면에서 내부로 들어갈수록 “반응 기체의 고갈 효과”로 인해 휘스커가 점점 세선화 되는 것을 볼 수 있으며 두 번째로 증착 온도에 따라서 debris, whisker, film등과 같이 증착물의 형상이 변화하게 된다. 이러한 형상의 변화는 여러 가지 물성의 변화를 가져오게 되는데 그 중에서, film이 증착 되는 경우에는 기판의 강도가 박 115.7% 가량 현저하게 증가하는 반면에 비표면적과 기체 투과율은 감소하게 되지만, 휘스커의 경우에는 강도가 95%, 비표면적은 33.5% 정도가 증가하며 기체 투과율 감소를 최소화 할 수 있다. 따라서 다공성 알루미나 기판 내부 기공에 휘스커를 증착 하면 필터로 인한 압력 저하를 최소화하면서 기공의 크기보다 작은 미세 분진들을 걸러 낼 수 있게 되므로 차세대 필터 재료로 기대된다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 춘계학술대회 논문집
• /
• pp.466-471
• /
• 2014

The interior vehicle noise due to the exterior aerodynamic field is an important topic in the acoustic design of a car. The air flow detached from the A-pillar and impacting the side windows are of particular interest as they are located close to the driver / passenger and provides a lower insulation index than the trimmed car body parts. This paper presents a numerical analysis method for a simplified vehicle model. The internal air cavity including trim component are included in the simulation. The car body includes the windshield and two side windows. The body is made of aluminum and trimmed with porous layers. The methodology proposed in this paper relies on two steps: the first step involves the computation of the exterior flow and turbulence induced non-linear acoustic field using PowerFlow. The second step consists in the computation of the vibro-acoustic transmission through the window using the finite element vibro-acoustic solver Actran. Additionally in order to validate the numerical process, an experimental set-up has been created based on the simplified vehicle. The vibration of the windshield and windows, the total wind noise level results and the relative contributions of the different windows are then presented and compared to measurements. The influence of the flow yaw angle (different wind orientation) is also assessed.

• 한국분말재료학회지
• /
• 제11권6호
• /
• pp.528-534
• /
• 2004

Using the nano Fe powders having 50 nm in diameter, Fe compact bodies were fabricated by injec-tion molding process. The relationship between microstructure and material properties depending on the volume ratio of powder/binder and sintering temperature were characterized by SEM, TEM techniques. In the compact body with the volume percentage ratio of 45(Fe powder) : 55(binder), which was sintered at $700^{\circ}C,$ the relative density was about $97{\%},$ and the values of volume shrinkage and hardness were about $66.3{\%}$ and 242.0 Hv, respec-tively. Using the composition of 50(Fe powder) : 50(binder) and sintered at $700^{\circ}C,$ the values of relative density, volume shrinkage and hardness of Fe sintered bodies were $73.3{\%},\;47.6{\%}$ and 152.8 Hv, respectively. They showed brittle fracture mode due to the porous and fine microstructure.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1278-1282
• /
• 2005

Air mattress is now used widely to prevent the pressure ulcer by reducing the localized pressure peaks. In this paper an air-cell mattress and its pressure control method based on an approximate anthropometric model are presented. The air-cell mattress has eighteen cylindrical air cells made of porous material allowing air leakage to contribute in reducing the development of pressure ulcer by lowering the pressure peak, temperature and humidity. To determine an optimal air-cell pressure appropriate for each user, we divide the parts of the body into four sections such as head, trunk, hip, and leg. Then, the pressure of each section is independently calculated from the weight of each part based on the individual body height and weight and the approximate anthropometric model. Air supply system for the air-cell mattress is implemented by using four electronic solenoid valves and an air compressor, and it is driven by a real-time micro-controller. The experimental results with seven subjects shows that the proposed air-cell mattress is effective for the prevention of the pressure ulcer.

• 한국세라믹학회지
• /
• 제51권4호
• /
• pp.332-336
• /
• 2014

A non-electric water purification system using the Korean traditional ceramic ware Onggi, was demonstrated as an appropriate technology to solve water shortages in under developed regions. Generally, Onggi is produced using large size raw materials that are sintered at low temperature, resulting in a porous body that shows air and water permeability. An Onggi filter was prepared using a spinning wheel with the addition of rice bran to the body to increase porosity. The porosity of the obtained Onggi filter was 25.1%; the water permeability was 85.1 $L/m^2h$. Turbidity and TDS of the purified water using Onggi filter were decreased by 97.7% and 29.1%, respectively.

• 자원리싸이클링
• /
• 제19권1호
• /
• pp.33-39
• /
• 2010

화력발전소에서 배출되는 바닥재와 준설토를 70:30(wt%)로 혼합하고 이를 $6{\pm}2mm$ 크기 구형으로 성형 및 로터리 킬른에서 $1125^{\circ}C$/15 min으로 소성한 뒤, 그 물리적 특성을 평가함으로써 오염 토양을 복원하는데 사용되는 흡착제로의 적용 가능성을 분석하였다. 제조된 소결체(BD)는 100 ${\mu}m$ 이상의 거대 기공 및 10 ${\mu}m$ 이하의 미세기공을 모두 가지고 있었으며, 비표면적, 기공율 그리고 공극율은 각각 $12.0m^2/g$, 30.1%그리고 38.2%이었다. BD 소결체를 한번 분쇄한 시편(BD-C)은 종횡비$\fallingdotseq$2의 부정형이었으나, 부피비중 및 기공크기 분포는 BD와 비슷한 값을 나타내었다. 한편 BD-C 시편의 비표면적, 기공율 그리고 공극율은 BD에 비해 더 우수한 값을 나타내었는데 이는 내부에 존재하던 폐기공(closed pores)이 분쇄과정에서 개기공(open pores)으로 변환되면서 겉보기 부피가 감소했기 때문이다. 제조된 소결체의 영 전하점(IEP)는 약 pH=5이었고 따라서 미생물을 소결체에 결합시킬 때 반응용액의 최적 pH를 알 수 있었다. 본 연구에서 제조된 소결체는 오염 토양 복원에 사용되는 흡착제로의 적용이 가능하며, 더구나 측정된 데이터를 이용하여 BD와 BD-C를 적절한 비율로 혼합하면 적용 상황에 따라 다른 공극율, 기공율 등의 요구 조건을 최적으로 맞출 수 있을 것으로 기대된다.

• 한국전산유체공학회지
• /
• 제10권3호
• /
• pp.55-62
• /
• 2005

Flow and temperature fields of a mid-size vehicle engine room are examined numerically to analyze the enhancement of cooling efficiency of several different design cases in a front body shape. The wall temperatures of a radiator and an engine parte are utilized to predict the effects of engine cooling on the thermal environment and the cooling efficiency in an engine room. The analyzed results are the mass flow rate at the upper and lower inlets, in the radiator, and the condenser. It is shown that the shape of the front end, lay-out of the engine parts, and the presence of the undercover greatly influence the flow and temperature fields, and the enhancement of cooling efficiency in the engine room.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2003년도 춘계학술발표대회 논문집
• /
• pp.135-138
• /
• 2003

Skin, the complex membrane that holds the body together, also embraces the full spectrum of design today-from product to architecture, fashion, and media. Every object has a skin. thick or thin, smooth or rough, porous or impermeable, the skin is the line between a hidden interior and an exterior we experience. Skin： Surface, Substance and Design is a compendium of products, furniture, fashion, architecture and media that expand the limits of what we understand as surface. Reflecting the convergence of natural and artificial life, this provocative a thesis shows how enhanced and simulated skins appear everywhere in today's world.