• 제목/요약/키워드: pore 형성

검색결과 433건 처리시간 0.028초

ABS 수지상의 도금층 형성을 위한 에칭 방법 연구 (Study of Etching Method for Plating Layer Formation of ABS Resin)

  • 최경수;최기덕;신현준;이상기;최순돈
    • 한국표면공학회지
    • /
    • 제47권3호
    • /
    • pp.128-136
    • /
    • 2014
  • In the present study, we successfully developed an eco-friendly chemical etching solution and proper condition for plating on ABS material. The mechanism of forming Ni plating layer on ABS substrate is known as following. In general, the etching solution used for the etching process is a solution of chromic acid and sulfuric acid. The etching solution is given to the surface resulting in elution of butadiene group, so-called anchor effect. Such a rough surface can easily adsorb catalyst resulting in the increase of adhesion between ABS substrate and Ni plating layer. However a use of chromic acid is harmful to environment. It is, therefore, essential to develop a new alternative solution. In the present study, we proposed an eco-friendly etching solution composed of potassium permanganate, sulfuric acid and phosphoric acid. This solution was testified to observe the surface microstructure and the pore size of electrical Ni plating layer, and the adhesive correlation between deposited layers fabricated by electro Ni plating was confirmed. The result of the present study, the newly developed, eco-friendly etching solution, which is a mixture of potassium permanganate 25 g/L, sulfuric acid 650ml/L and phosphoric acid 250ml/L, has a similar etching effect and adhesion property, compared with the commercially used chromium acid solution in the condition at $70^{\circ}C$ for 5 min.

SCP 개량지만의 압밀거동에 대한 스미어 효과 (Smear Effect on Consolidation Behaviors of SCP-improved Ground)

  • Kim, Yun-Tae
    • 한국지반공학회논문집
    • /
    • 제20권2호
    • /
    • pp.59-66
    • /
    • 2004
  • SCP 개량지반은 연약지반에 타설된 모래말뚝과 주변 연약지반으로 구성된 복합지반을 형성한다. 복합지반에 상재하중이 작용할 경우, SCP쪽으로 반경방향의 흐름에 의하여 시간의존적인 압밀거동이 유발될 뿐만 아니라, SCP와 주변 연약지반 사이에서 강성도 차이로 인하여 응력전이가 유발된다. 본 논문은 SCP 개량지반의 압밀거동에 대한 교란효과의 영향을 고려하기 위하여 원통형 실린더 지반에 대한 수치해석을 수행하였다. 수치해석결과 연약지반의 교란영역은 유효응력-간극수압의 거동, 응력전이기구, 응력분담비에 영향을 줌을 알 수 있었다. 또한 SCP와 점토 사이의 응력전이량은 상부 z/H=0.25에서 가장 크며, 깊이가 증가함에 따라 감소한다. 응력분담비는 상수값이 아니라 압밀과정에 의존하며, 교란영역을 가진 연약지반의 응력분담비는 교란영역이 없는 연약지반의 응력분담비보다 큼을 알 수 있다.

진공 막증류 공정의 스케일 막오염 형성에 관한 연구 (Scale formation on vacuum membrane distillation for SWRO brine treatment)

  • 황태문;장은경;남숙현;구재욱;김은주
    • 상하수도학회지
    • /
    • 제31권4호
    • /
    • pp.311-319
    • /
    • 2017
  • Scale formation is inevitable problem when seawater is treated by vacuum membrane distillation. The reason is the high concentration of calcium ion($Ca^{2+}$), sulfate ion(${SO_4}^{2-}$) and bicarbonate ion(${HCO_3}^-$). These ions form calcium sulfate($CaSO_4$) and calcium carbonate($CaCO_3$) on the membrane. The scale formed on membrane has to be removed, because the flux can be severely reduced and membrane wetting can be incurred. This study was carried out to investigate scale formation and effectiveness of acid cleaning in vacuum membrane distillation for SWRO brine treatment. It was found that permeate flux gradually declined until volume concentration factor(VCF) reached around 1.55 and membrane wetting started over VCF over 1.6 in the formation of precipitates containing $CaSO_4$ during VMD operation. In contrast, when calcium carbonate formed on membrane, permeate flux was gradually reduced until VCF 3.0. The precipitates containing both $CaSO_4$ and $CaCO_3$ were formed on the membrane surface and in the membrane pore.

연속식 가스화로를 이용한 목질계 바이오매스 이산화탄소 가스화 연구 (Study on a Carbon Dioxide Gasification for Wood Biomass using a Continuous Gasifier)

  • 박민성;장유운;장유경;전영남
    • 대한환경공학회지
    • /
    • 제36권10호
    • /
    • pp.704-710
    • /
    • 2014
  • 바이오매스는 지구온난화에 중요한 기여자인 이산화탄소와 같은 온실가스를 해결할 수 있는 대체에너지로 간주된다. 또한 바이오매스 에너지는 열화학적 전환 공정을 통해 다양한 형태로 전환된다. 본 연구에서는 목질계 바이오매스의 가스화를 위해 연속식 가스화기를 제작하였다. 목질계 바이오매스는 폐목재를 사용하였다. 이산화탄소 가스화 실험은 가스화 온도, 함수율 그리고 주입 이산화탄소 농도 변화에 따라 진행하였다. 실험결과는 가스화 온도가 증가함에 따라 생성가스 발생량이 증가함을 보였다. 경질타르는 중질타르의 열적 분해에 의해 증가되었고, 주사현미경 분석을 통해 촤 세공형성이 발달되는 것을 확인하였다. 일산화탄소 농도는 부다 반응에 의해 이산화탄소 주입농도 증가함에 따라 증가하였다. 변수별 실험에 의해, 최적 실험 조건에서 수소와 일산화탄소는 32.91%와 48.33%가 생성되었다.

가토 하악골에 Proplast I과 II 이식후 주위 조직반응 및 골형성 (EFFECTS OF PROPLAST I AND II IMPLANTATION ON THE SURROUNDING TISSUE RESPONSE AND BONE FORMATION IN RABBIT MANDIBLE)

  • 류선열;김건중
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • 제13권3호
    • /
    • pp.252-264
    • /
    • 1991
  • The purpose of this study was to compare the response of adjacent tissue and new bone formation after implantation by different methods of subperiosteal using using Proplast I and II in rabbit mandible. Microstructure of Proplast I and II was observed by scanning electron microscope. And the implantation procedure was carried out by dividing into tow groups, A and B. a group consisted of subperiosteal graft on the cortex, and the other B group was made up onlay graft following artificial decortication in the madibular body of rabbit. The experimental animals were sacrificed on the 1st, 2nd, 4th and 8th week after grafting for macroscopic and histopathologic examination. The samples extracted at the 6th postgrafting week were also used for biometric test. The result ere as follows : 1. By scanning electron microscopic observation, pore size was $50{\sim}180{\mu}m$ in the Proplast I and $100{\sim}220{\mu}m$ in Proplast II. 2. Macroscopically, infection of the graft site, deformation and displacement of the implanted materials were not observed in all experimental groups. 3. In the tissue response, infiltration of inflammatory cells and multinucleated giant cells were observed from the 2nd to the 8th week in Proplast I. Inflammatory cells decreased in number from the 2nd week in Proplast II suggesting that Proplast II is better than Proplast I. 4. Bone formation was not observed until the 8th week in the group A, but new bone formation from the surrounding graft bed and the periostium was appeared from the 4th week in the group B. 5. The maximum mean values of shear stress mere serially $65.5gf/mm^2$ in Proplast II of group B, $32.9gf/mm^2$ in Proplast I of group B, $17.0gf/mm^2$ in Proplast II of group A, and $15.7gf/mm^2$ in Proplast I. of group A.

  • PDF

Sol-gel 및 CVD법을 이용한 고온 수소 분리용 silica/alumina 복합막의 합성 (Synthesis of Silica/Alumina Composite Membrane Using Sol-Gel and CVD Method for Hydrogen Purification at High Temperature)

  • 서봉국;이동욱;이규호
    • 멤브레인
    • /
    • 제11권3호
    • /
    • pp.124-132
    • /
    • 2001
  • 고온에서 수소 분리 회수를 목적으로 silica/alumina 복합 막을 합성하였다. 막의 선택 투과 성능을 향상시키기 위해, sol-gel법에 의한 silica 및 alumina층을 중간층으로 도입하고, 그 위에 강제유동 CVD법에 의한 silica를 합성하였다. Sol-gel법에 의해 ${\alpha}$-alumina tube에 합성한 ${\gamma}$-alumina 및 silica 막은 Knudsen 확산 영역의 많은 mesopore를 포함하고 있어서 수소 선택 분리 막으로는 적합하지 못했다. 하지만, sol-gel법에 의해 합성한 silica/${\gamma}$-alumina층에 강제유동 CVD법으로 silica를 합성한 결과, 질소 투과 영역의 세공이 완전히 제거되어, 높은 수소 선택성을 가지는 복합 막이 형성되었다. 그 막은 온도에 따라 수소 투과 속도가 증가하여 $450^{\circ}C$에서 $5.57{\times}10^{-8}molm^2s^LPa^1$의 수소 투과 속도와, 9.52 kJ/mol의 활성화 에너지를 나타냈다. 분자체 효과에 의해 질소 투과가 완전히 배제되고, 수소만 선택적으로 투과되는 silica/alumina 복합막이 성공적으로 합성된다.

  • PDF

浦項 九龍浦 지역 第 3 紀 火山堆積岩 中의 沸石鑛物의 産出狀態와 成因 (Occurrence and Genesis of Zeolites from the Tertiary Volcanic Sediments in the Guryongpo Area, Korea)

  • 최윤성;김수진
    • 한국광물학회지
    • /
    • 제6권1호
    • /
    • pp.38-47
    • /
    • 1993
  • 클라이놉타일로라이트와 모데나이트는 호소환경에서 퇴적된 제3기 장기충군에 속하는 눌대리조면암질 응회암과 구룡포데사이트질 응회암의 주요구성 광물이다. 이들 광물의 생성과정을 알아보기 위하여 서로 다른 응회암질 퇴적암에서 불석광물들의 속성정출순서와 이들의 화학적 동향에 대한 연구가 수행되었다. 현미경적 조직관찰과 화학조성으로부터 밝혀진 생성순서, 즉 Ca-스멕타이트 ${\leftrightarrow}$(Ca, K)-클라이놉타일로라이트 ${\leftrightarrow}$(K, Na)-모데나이트는 공극유체의 알칼리이온의 활동도와 Si/Al활동도 비가 속성변질작용과 함께 체계적으로 변화했다는 것을 지시해준다. 불석광물형성의 화학적 진행 추이는 눌대리조면암질 응회암에서는 Ca와 Mg의 감소, Na의 증가 및 K의 증가-감소방향으로 진행되었다. 유리질 물질로부터 스멕타이트를 거쳐 알칼리 불석으로 이어지는 생성순서는 분해용융과 그 직후의 정출작용의 결과이다. 각 불석광물의 화학조성상의 불균질성은 이와 같은 광물생성과정에 기인한다.

  • PDF

고정화 글루코아밀라제의 성질과 응용 (Characteristics and Applications of Immobilized Glucoamylase)

  • 조성환;김재욱
    • Applied Biological Chemistry
    • /
    • 제28권4호
    • /
    • pp.233-238
    • /
    • 1985
  • Glucoamylase를 $ZrO_2$로 피복된 96% porous glass에 azo-linkage를 형성시켜 결합하게 한후, 2.5% glutaraldehyde로 처리하여 효소를 고정화시켰다. 효소기질로는 용해도가 높고 점도가 낮은 30% enzyme thinned cornstarch (dextrose equivalent 값 : 24)를 사용하여 plug flow-column reactor에서 연속반응시켰다. 반응 최적 pH는 수용성효소의 5.0보다 alkaline 쪽으로 기울어져 7.0으로 나타났고, 고정화반응에 따라 열안정성이 높아지고 $40{\sim}60^{\circ}C$에서 최적 온도범위를 가리키며, Km값은 수용성 효소의 1.25mM보다 낮은 1.04mM값을 보여 주었다. 따라서, pH 7.0, $45^{\circ}C$에서 160시간 동안 corn starch를 기질로 효소반응을 시켜 glucose 90.3%, maltose 8.0%인 DE값 94.0인 전분당분해산물을 획득할 수 있었다.

  • PDF

가압식 분리막 여과에서 무기입자의 존재가 유기파울링에 미치는 영향 (Effect of Inorganic Particles on Organic Fouling in Pressurized Membrane Filtration)

  • 장호석;김정환
    • 멤브레인
    • /
    • 제30권2호
    • /
    • pp.131-137
    • /
    • 2020
  • 본 연구에서는 가압식 분리막 여과에서 무기입자의 존재가 유기파울링에 미치는 영향을 관찰하였다. 유기파울링의 유발을 위해 알긴산나트륨(sodium alginate, SA)를 이용한 정밀여과 실험에서 무기 실리카(SiO2) 입자의 존재 유무와 상관없이 분리막 파울링은 여과초기 완전공극막힘에서 여과시간이 경과할수록 케이크 형성에 의해 주로 지배되었다. 그러나 무기입자의 존재 시 정압여과에서 알긴산나트륨 파울링 케이크 비저항값과 압축성은 상대적으로 낮게 관찰되었고 이로 인해 낮은 파울링 속도가 관찰되었다. 동일한 시료를 이용한 정량여과 실험을 수행한 결과 정압여과에 비해 정량여과에서 여과초기 공극막힘현상 및 파울링 속도는 더욱 증가하였다. 이와 같은 현상은 파울링층이 지닌 압축성으로 막간차압의 증가 시 케이크 비저항값이 함께 증가하였기 때문인 것으로 판단된다. 알긴산나트륨과 실리카 입자가 함께 존재 시 알긴산나트륨이 단독으로 존재하는 것보다 수리학적 세정을 통한 파울링 제거효과는 더욱 좋은 것으로 관찰되었다.

가돌리니움 이온에 의한 톨라신 용혈활성의 농도의존적 억제 (Dose-dependent suppression of tolaasin-induced hemolysis by gadolinium ion)

  • 허정훈;윤영배;김영기
    • Journal of Applied Biological Chemistry
    • /
    • 제64권4호
    • /
    • pp.369-374
    • /
    • 2021
  • 느타리버섯의 갈반병은 Pseudomonas tolaasii에 의해 생성된 톨라신 및 이의 유사 펩티드 독소에 의해 발생한다. 톨라신 펩티드들은 세포막에 pore를 형성하고 버섯의 자실체 구조를 파괴한다. 적혈구가 파괴되는 용혈은 톨라신의 세포독성에 의해 일어난다. 톨라신의 용혈활성은 Zn2+ 및 Ni2+과 같은 금속 이온에 의해 저해된다. 가돌리니움 이온을 첨가하였을 때, 톨라신에 의한 용혈작용에서 1 mM 이하의 농도에서는 용혈작용이 증가하고 그 이상의 농도에서는 저해되는 이중 효과가 나타났다. 가돌리니움 이온에 의한 톨라신 활성저해 기작은 다른 양이온들에 의한 저해기작과 다른 것으로 보인다. 가돌리니움 이온은 음전하를 갖는 막지질들에 결합하여 지질막의 측압을 변화시키는 것으로 보고되어, 톨라신 이온통로의 여닫힘에 직접 작용하기 보다는 막 구조의 단단함을 증가시켜 막에 대한 톨라신 이온통로의 안정성을 감소시키는 것으로 보인다.