• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.1
• /
• pp.7-13
• /
• 2020

Purpose: This study was to evaluate marginal and internal discrepancy of 3-unit fixed dental prostheses (FDP) fabricated by subtractive manufacturing and additive manufacturing. Materials and methods: 3-unit bridge abutments without the maxillary left second premolar were prepared (reference model) and the reference model scan data was obtained using an intraoral scanner. 3-unit fixed dental prostheses were fabricated in the following three ways: Milled 3-unit FDP (MIL), digital light processing (DLP) 3D printed 3-unit FDP (D3P), stereolithography apparatus (SLA) 3D printed 3-unit FDP (S3P). To evaluate the marginal/internal discrepancy and precision of the prosthesis, scan data were superimposed by the triple-scan protocol and the combinations calculator, respectively. Quantitative and qualitative analysis was performed using root mean square (RMS) value and color difference map in 3D analysis program (Geomagic control X). Statistical analysis was performed using the Kruskal-Wallis test (α=.05), MannWhitney U test and Bonferroni correction (α=.05/3=.017). Results: The marginal discrepancy of S3P group was superior to MIL and D3P groups, and MIL and D3P groups were similar. The D3P and S3P groups showed better internal discrepancy than the MIL group, and there was no significant difference between the D3P and S3P groups. The precision was excellent in the order of MIL, S3P, and D3P groups. Conclusion: Within the limitation of this study, the 3-unit fixed dental prostheses fabricated by additive manufacturing showed better marginal and internal discrepancy than the those of fabricated by subtractive manufacturing, but the precision was poor.

• Horticultural Science & Technology
• /
• v.30 no.3
• /
• pp.256-260
• /
• 2012

This study was carried out to improve the fruit color through ABA treatment and to determine the optimum harvest time for producing high quality fruits in 'Hongisul' grapes. Spraying of $1000 mg{\cdot}L^{-1}$ exogenous ABA at early verasion (70 days after full bloom, DAFB) brought increase of endogenous ABA and soluble solid contents and enhanced fruit coloration. So, it was possible to harvest ABA treated fruits from 85 days after full bloom (15 days after treatment) by accelerated anthocyanin content which increased continuously until 110 DAFB. An increase of soluble solid and decrease of total acidity appeared steadily with the onset of berry ripening. After 100 DAFB, soluble solid content and total acidity did not change significantly, but the berry firmness was suddenly decreased. Consequently, it was suggested that ABA treated fruits need to be harvested at about 100 DAFB because of their short period of marketing by over ripening. On the contrary, harvesting of untreated fruit was totally impossible at 85 DAFB because of their poor berry coloration. But it was possible to harvest them at 100 DAFB based on the soluble solid/acidity ratio, whereas the berry coloration was progressed poorly. On the other hand, the fruits harvested at 110 DAFB showed acceptable berry coloration but their berry firmness was dropped significantly coincide with overripening. Therefore, it was needed to develop an altered production system for improving coloration at around 100 DAFB in 'Hongisul' grapes.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.6
• /
• pp.761-767
• /
• 2006

To determine freshness and quality change of chicken products during storage, we manufactured freshness indicator and monitored the surface pH, volatile basic nitrogen (VBN), thiobarbituric acid reacted substance (TBARS), total bacterial counts, electronic nose analysis, and sensory evaluation. All chicken products (drum, wing, thigh) had a change in color of freshness indicator after storage of 3 days at $4^{\circ}C$, indicating poor quality at the time. VBN, TBARS values, and total bacterial counts reached the decay point at the time of color change of freshness indicator attached to the surface of chicken samples. The sensory evaluation also indicated sample was not acceptable by off-odor at day 4 of storage. According to electronic nose analysis to examine off-odor, there were significant differences in terms of principal component analysis values among chicken samples of day 0, day 3, and day 5 of storage. These results suggest that freshness indicator should be useful in determining expiration date of chicken products during marketing by indicating the microbial safety as well as physicochemical and sensory change.

• Korean Journal of Food Science and Technology
• /
• v.39 no.6
• /
• pp.644-651
• /
• 2007

To establish the optimum conditions for storing buttercup squash, we examined the effectiveness of several storage methods and the quality of the squash under various storage conditions, including temperature (12 and $20^{\circ}C$) and relative humidity (20, 40, 60, and 80%). The spoiling rate of the squash was affected more by the storage temperature than the relative humidity, and the squash stored at $20^{\circ}C$ started to be deteriorated after 20 days of storage. At $20^{\circ}C$, soluble solid content gradually increased until 20 days of storage, and then it tended to decrease. The L-value had a tendency to increase with days of storage, and the a- and b-value also increased after 40 days. In addition, the color changes were great when the squash was stored at high temperature and high relative humidity. The total pectin content increased until 20 days at $20^{\circ}C$, and then it decreased, but less change was observed in the squash stored at $12^{\circ}C$. Overall, the results showed that storage at $20^{\circ}C$ after field curing resulted in excessive weight loss, color loss and poor eating quality, as well as a high level of decay (approximately 70%) after 40 days. However, the squash stored at $12^{\circ}C$ and 60% RH (relative humidity) showed less degreening and had a reduced level of decay, below 10%.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.4
• /
• pp.414-420
• /
• 2009

We dyed traditional Korean hand-made papers (Hanji) with colorants extracted from fruits of Alnus japonica to investigate the effect of various dyeing factors (mordant, dye concentration and dyeing assistant) on colors, K/S values and light fastness of the dyed Hanji. The dyed hanji had brown color. The K/S value of dyed Hanji was increased by mordanting with alum and copper acetate. $a^*$ and $b^*$ value of dyed Hanji was decreased slightly by mordanting with alum and Iron(II) chloride. The K/S value and $b^*$ of dyed Hanji increased with increasing concentration of dye, but $L^*$ value of dyed Hanji decreased. The K/S value of dyed Hanji was also increased by fixing agent. When Hanji was mordanted with Iron(II) chloride and was not mordanted, use of fixing agent resulted in greater increase of K/S value. Use of fixing agent resulted in poor light fastness. When fixing agent was used, mordanting with copper acetate resulted in smaller color difference than mordanting with alum after aging test.

• Journal of the Korean Society of Food Culture
• /
• v.9 no.3
• /
• pp.303-310
• /
• 1994

This study was conducted to assess the acceptability of the desirable serving temperatures of soups by evaluating the sensory characteristics of Radish Clear Beef Soup, Meat Pot Stew, and Chinese Cabbage Beanpaste Soup used in the Foodservice Establishment. 1. Taste revealed a better acceptability under a high temperature than that under a low temperature in three soups. 2. The aroma of Meat Pot Stew, Chinese Cabbage Beanpaste Soup showed a significant difference for each temperature, and especially, Chinese Cabbage Beanpaste Soup showed a better sabory aroma at $80^{\circ}C{\sim}85^{\circ}C$. 3. Meat Pot Stew showed little significant differences in color and in its change among three soups. Chinese Cabbage Beanpaste Soup did not make any change of color at both $35^{\circ}C{\sim}40^{\circ}C\;and\;50^{\circ}C{\sim}55^{\circ}C$. 4. In a Meat Pot Stew case, appearance conspicuously changed at $35^{\circ}C{\sim}40^{\circ}C$, which resulted in losing appetite. Three soups showed a good response above at $65^{\circ}C$ and a very poor response at below $55^{\circ}C$. 5. Radish Clear Beef Soup, Meat Pot Stew, Chinese Cabbage Beanpaste Soup showed a tender texture at above $80^{\circ}C,\;65^{\circ}C\;and\;50^{\circ}C$. 6. Chewiness showed a good acceptability from $50^{\circ}C\;to\;80^{\circ}C$ in Radish Clear Beef Soup, Chinese Cabbage Beanpaste Soup cases, but only in the case of Meat Pot Stew showed good response at $80^{\circ}C{\sim}85^{\circ}C$. 7. In cases of Radish Clear Beef soup, Meat Pot Stew, bland and stinking aroma, and aftertaste were increased remarkably in proportion as temperature was lowered. In case of Meat Pot Stew, especially, it turned out to be almost impossible to eat at $35^{\circ}C{\sim}40^{\circ}C$. 8. In cases of Radish Clear Beef Soup, Chinese Cabbage Heanpaste Soup, overall acceptability at $65^{\circ}C$ was comparatively good but aroma and taste at below $65^{\circ}C$ was so bad that there was the eminent tendency to avoid tasting.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.5
• /
• pp.701-710
• /
• 2019

Objective: This study investigated the effect of different acute heat stress (HS) levels on chicken meat quality and ultra-structure. Methods: Chickens were randomly divided into 7 groups to receive different HS treatments: i) $36^{\circ}C$ for 1 h, ii) $36^{\circ}C$ for 2 h, iii) $38^{\circ}C$ for 1 h, iv) $38^{\circ}C$ for 2 h, v) $40^{\circ}C$ for 1 h, vi) $40^{\circ}C$ for 2 h, and vii) un-stressed control group ($25^{\circ}C$). Blood cortisol level, breasts initial temperature, color, pH, water holding capacity (WHC), protein solubility and ultra-structure were analyzed. Results: HS temperatures had significant effects on breast meat temperature, lightness ($L^*$), redness ($a^*$), cooking loss and protein solubility (p<0.05). The HS at $36^{\circ}C$ increased $L^*{_{24h}}$ value (p<0.01) and increased the cooking loss (p<0.05), but decreased $a^*{_{24h}}$ value (p<0.05). However, as the temperature increased to $38^{\circ}C$ and $40^{\circ}C$, all the values of $L^*{_{24h}}$, cooking loss and protein denaturation level decreased, and the differences disappeared compared to control group (p>0.05). Only the ultimate $pH_{24h}$ at $40^{\circ}C$ decreased compared to the control group (p<0.01). The pH in $36^{\circ}C$ group declined greater than other heat-stressed group in the first hour postmortem, which contributed breast muscle protein degeneration combining with high body temperature, and these variations reflected on poor meat quality parameters. The muscle fiber integrity level in group $40^{\circ}C$ was much better than those in $36^{\circ}C$ with the denatured position mainly focused on the interval of muscle fibers which probably contributes WHC and light reflection. Conclusion: HS at higher temperature (above $38^{\circ}C$) before slaughter did not always lead to more pale and lower WHC breast meat. Breast meat quality parameters had a regression trend as HS temperature raised from $36^{\circ}C$. The interval of muscle fibers at 24 h postmortem and greater pH decline rate with high body temperature in early postmortem period could be a reasonable explanation for the variation of meat quality parameters.

• Textile Coloration and Finishing
• /
• v.34 no.2
• /
• pp.93-101
• /
• 2022

In this study, the dyeing properties of supercritical fluid dyed cotton fabrics were investigated which use two types of dyes, such as C.I. Disperse orange and C.I. Disperse red 167. Dyeing temperature, pressure and leveling time were equally applied at 130 ℃, 250 bar, and 60 minutes with reference to the related literature, and experiments were performed at concentrations of 0.04, 0.1, 0.4 and 0.8 % o.w.f with different concentrations. Dyeability was confirmed through measurement of washing fastness and color coordinate, and a calibration curve of each dye was drawn up and the absorbance of the residual dye was measured to confirm the amount of residual dye and the dye exhaustion rate at the corresponding concentration. As a result of color difference measurement, as the concentration increased, the L^* value decreased and the K/S value increased. However, as the concentration increased, the increase in K/S value decreased compared to the input amount, and this tendency was more obvious in C.I. Disperse red 167 than in C.I. Disperse orange 155. The dye exhaustion rate which was calculated by using the amount of residual dye in the pot was also C.I. Disperse orange 155 was 96.16 % and C.I. Disperse red 167 was 94.57 %. However, as the dyeing concentration increased, the dye exhaustion rate decreased, that C.I. Disperse orange was 95.33 % and C.I. Disperse red 167 was 90.63 %. As a result of the washing fastness test for both dyes, dyed samples of which concentrations were 0.4 and 0.8 % o.w.f decreased by 0.5 ~ 1.0 grade. This is predicted because the dye did not completely adhere to the amorphous region of the cotton fiber and the dye simply adsorbed. The fastness to rubbing also maintained at least grade 3-4 up to the 0.1 % o.w.f concentration, but at the concentration of 0.4 % o.w.f or higher, it fell to grade 1 or lower, showing a very poor friction fastness.

• Cartoon and Animation Studies
• /
• s.15
• /
• pp.267-281
• /
• 2009

This study was conducted in order to look for how to create added values by combining cultural contents with other industries effectively. For this purpose, we examined in what directions the tourist industry, which is the main industry of the Jeju Special Self-governing Province, should be combined with cultural contents. It is widely admitted that cultural contents can create various added values, but there have been insufficient efforts to develop cultural contents and link them to added values. In particular, local self-governing bodies' understanding of cultural contents is seriously poor. In order to improve this, we need to have appropriate perception of cultural contents and to change our idea for effective linking of cultural contents to added values. Thus, this study proposed that the development of cultural contents is achieved not simply through the development of contents but through the combination of various methods including the establishment of product development strategies, the establishment of tourist program development strategies, and the integration of slogans.

• The Research Journal of the Costume Culture
• /
• v.28 no.2
• /
• pp.265-284
• /
• 2020

This study aimed to analyze the performance of Disney-collaborated fashion lines based on online consumer reviews. To do so, the researchers employed text mining and network analysis to identify key words in the reviews of these products. Blogs, internet cafes, and web documents provided by Naver, Daum, and YoutTube were selected as subjects for the analysis. The analysis period was limited to one year after for the 2019. Data collection and analysis were conducted using Python 3.7, Textom, and NodeXL. The research terms in question were as follows: 'Disney fashion collaboration' and 'Frozen fashion collaboration'. Preliminary survey results indicated that 'Elsa's dress' was the most frequently mentioned term and that the domestic fashion brand Eland Retail was the most active in selling Disney branded clothing through its own brand. The writers of reviews for Disney-collaborated fashion products were primarily mothers with daughters. Their decision to purchase these products was based upon the following factors; price, size, stability of decoration, shipping, laundry, and retailer. The motives for purchasing the product were the positive response of the consumer's child and the satisfaction of the parents due to the child's response. The problems to be solved included insufficient quantity of supply, delay in delivery, expensive price considering the number of times children's clothes are worn, poor glitter decoration, faded color, contamination from laundry, and undesirable smells immediately after the purchase.