• Applied Chemistry for Engineering
• /
• v.22 no.4
• /
• pp.444-446
• /
• 2011

Nanosized polystyrene (PS) particles with the narrow size distribution were synthesized from styrene monomer at the presence of the surfactant (polyvinylpyrrolidone, PVP), the solvent of 95 % alcohol, and the initiator of benzoyl peroxide (BPO). Since the emulsion polymerization method was applied, many factors could have effects on the size of PS particles during polymeric process. Aside from the concentration of monomer, surfactant and initiator, the factors such as the stirring speed and the ultrasonic radiation were mainly studied. By adjusting the radiating time, PS particles with their size of about 400 nm were synthesized.

• Journal of Pharmaceutical Investigation
• /
• v.18 no.2
• /
• pp.43-47
• /
• 1988

In order to increase the dissolution characteristics of relatively water-insoluble metoclopramide (MCP), coprecipitates of MCP with polyvinylpyrrolidone (PVP), polyethylene glycol (PEG) 1000, 4000 or 6000 were prepared in various drug to polymer ratios. The dissolution rate of MCP-PVP coprecipitate was greater than those of MCP alone, MCP-PVP physical mixture and MCP-PEG coprecipitates. The dissolution rate of MCP-PEG 6000 coprecipitate was greater than those of MCP-PEG 1000 and MCP-PEG 4000 coprecipitates. The dissolution half-lives $(T_{50%})$ for MCP alone and 1:5 (w/w) MCP-PEG 6000 coprecipitate were determined by the log-probit method at $37^{\circ}C$ and found to be 4.17 and 0.98 min, respectively.

• Journal of Pharmaceutical Investigation
• /
• v.14 no.1
• /
• pp.1-10
• /
• 1984

Effects of water soluble carrier on the dissolution characteristics of indomethacin coprecipitates were investigated. Water soluble carriers used were polyvinylpyrrolidone, dextrose, mannitol and their mixtures of various ratios. The dissolution rates of indomethacin from coprecipitate with ratios of drug-to-carrier, kinds of carrier and ratios of carriers were as follows: 1. The dissolution rates increased proportionally to the ratios of carrier in the case of both single and combined carrier, and the dissolution rate of coprecipitate with the combined carrier was more rapid than that with single carrier. 2. The combined carrier of PVP-dextrose (1 : 2) in the case of the coprecipitate of drug-to carrier (1 : 1) and PVP-dextrose (4 : 1) in the case of the coprecipitate of drug-to carrier (1 : 3) yield the most rapid dissolution rate. 3. The dissolution rate of indomethacin was the most markedly enhanced in the case of the combined carrier of PVP and dextrose.

• YAKHAK HOEJI
• /
• v.25 no.4
• /
• pp.187-192
• /
• 1981

In order to increase the dissolution rate on the mixture of sulfamethoxazole and trimethoprim (SMX-TMP), their coprecipitates with polyvinylpyrrolidone (PVP) were studied. Coprecipitates prepared with various ratios of SMX and TMP were examined such as hygroscopicity, apparent solubility, apparent partition coefficient and the dissolution behavior of SMX-TMP's coprecipitates and their physical mixtures. The hygroscopicity of coprecipitates were less than that of physical mixtures. The apparent solubility and dissolution rate of SMX-TMP's coprecipitates were found to be greatly increased. The dissolution rates of SMX and TMP in the coprecipitates were decreased when the ratio of two ingredients to PVP was smaller, and the dissolution rate of SMX was increased when the ratio of SMX to TMP was larger.

• Journal of Powder Materials
• /
• v.19 no.1
• /
• pp.55-59
• /
• 2012

In this work, the silver nanoparticles have been synthesized by electrical explosion of wire in three liquid mediums: deionized water (DIW), polyvinylpyrrolidone (PVP) and sodium dodecyl benzene sulfonate (SDBS) solutions. Absorption in the UV-visible region of these suspensions was measured in the range of 300-800 nm. A surface plasmon peak was observed at ~400 nm in all suspensions in measured wavelength range. Particle size was analyzed by transmission electron microscope. It showed that the particles had nearly spherical shape in all samples. The average particle sizes prepared in DIW, PVP and SDBS solution were 37, 31 and 27 nm, respectively. Stability of the suspensions was estimated by multiple light scattering method. The presence of PVP and SDBS surfactants in the exploding medium resulted in enhanced stability of the silver suspensions.

• Food Science and Preservation
• /
• v.4 no.1
• /
• pp.45-51
• /
• 1997

In our studies on the role of $\beta$-galactosidase in fruit softening, significant difficulty, was encountered in our attempts to extract RNA from persimmon(Diospyros kaki L. cv. Fuyu) fruit due to astringency and tannin content. Initial, unsuccessful RNA extractions involved methods using guanidinium isothiocyanate/CsCl with and without polyvinylpyrrolidone(PVP), phenol/sodium lauryl sulfate(SDS), guanidinium hydrochloride, as well as polysomal RNA purification method that used 0.2 M Tris-HCI (pH 9.0) containing KCI, Mg-acetate, EDTA, $\beta$-mercaptoethanol, and sucrose. A method was devised which employed treatment of fruit with CO2 gas to diminish astringency prior to RNA extraction, followed by extraction of tissue powders with Proteinase K extraction buffer containing PVP and ascorbate at an alkaline pH. This procedure resulted in the removal of tannins and other polyphenolics and extraction of relatively large amount of high-quality RNA suitable for cDNA library construction and polymerase chain reaction(PCR). Futhermore, the procedure does not use the toxic and corrosive chemical guanidinium isothiocyanate or require ultracentrifugation.

• Korean Journal of Materials Research
• /
• v.32 no.4
• /
• pp.193-199
• /
• 2022

In this study, lenses are fabricated using various nanomaterials as additives to a silicone polymer made with an optimum mixing ratio and short polymerization time. In addition, PVP is added at a ratio of 1 % to investigate the physical properties according to the degree of dispersion, and the compatibility with hydrophobic silicone and the possibility of application as a functional lens material are confirmed. The main materials are SIU as a silicone monomer, DMA, a hydrophilic copolymer, EGDMA as a crosslinking agent, and 2H2M as a photoinitiator. Holmium (III) oxide, Europium (III) oxide, aluminum oxide, and PVP are used. When Holmium (III) oxide and Europium (III) oxide are added based on the Ref sample, the characteristics of the lens tend to be similar overall, and the aluminum oxide shows a tendency slightly different from the previous two oxides. This material can be used as a silicone lens material with various nano oxides and polyvinylpyrrolidone (PVP) acting as a dispersant.

• Journal of Powder Materials
• /
• v.30 no.1
• /
• pp.47-52
• /
• 2023

The purpose of this study is to develop and evaluate amorphous spray-dried microparticles (SDM) containing levosulpiride to increase its solubility. SDM are prepared via solvent evaporation using polyvinylpyrrolidone (PVP) as the water-soluble polymer and Cremophor RH40 as the surfactant. The SDM is prepared by varying the amounts of PVP and Cremophor RH40, and its physicochemical properties, solubility, and dissolution are confirmed. All levosulpiride-loaded SDMs converted the crystalline drug into an amorphous form, significantly improving drug solubility and dissolution compared with the drug alone. SDM consisting of drug/PVP/Cremophor RH40 in a weight ratio of 5:10:3, with increased solubility (720 ± 36 vs. 1822 ± 51 ㎍/mL) and dissolution rate (10.3 ± 2.2 vs. 92.6 ± 6.0%) compared with drug alone, shows potential as a commercial drug for improved oral bioavailability of levosulpiride.

• Membrane and Water Treatment
• /
• v.11 no.2
• /
• pp.159-166
• /
• 2020

In this study, the performance and antifouling properties of polysulfone (PSf) and polyvinylidene fluoride/polyvinylpyrrolidone (PVDF/PVP) membranes in a membrane bioreactor (MBR) were investigated. The membranes were prepared via phase inversion method, and then characterized by a set of analyses including contact angle, porosity and water flux and applied in a lab-scale MBR system. Soluble microbial product (SMP), extracellular polymeric substance (EPS), FTIR, gel permission chromatography (GPC) and particle size distribution (PSD) analyses were also carried out for MBR system. The results showed that the MBR with PSf membrane had higher hydrophobic organic compounds which resulted in formation of larger flocs in MBR. However, in this MBR had high compressibility coefficient of cake layer was higher (n=0.91) compared to MBR with PVDF/PVP membrane (n=0.8); hence, the fouling was more profound. GPC analysis revealed that compounds with molecular weight lower than 2 kDa are more formed on PSf membrane more than PVDF/PVP membrane. The results of FTIR analysis confirmed the presence of polysaccharide and protein compounds on the cake layer of both membranes which was in good agreement with EPS analysis. In addition, the results showed that their concentration was higher for the cake on PSf membrane.

• Resources Recycling
• /
• v.23 no.6
• /
• pp.22-29
• /
• 2014

Recycling process of iron should be developed for efficient recovery of neodymium (Nd), rare metal, from acid-leaching solution of Nd magnet. In this study, $FeCl_3$ solution as iron source was used for preparation of iron nano particles with the condition of various factors, such as, reductant, and surfactant. $Na_4P_2O_7$ and Polyvinylpyrrolidone (PVP) as surfactants, $NaBH_4$ as reductant, and palladium chloride ($PdCl_2$) as a nucleation seed were used. Iron powder was analyzed by using XRD, SEM for measuring shape and size. Iron nano particles were prepared at the ratio of 1:5 (Fe (III) : $NaBH_4$). Size and shape of iron particles were round-form and 50 ~ 100 nm size. Zeta-potential of iron at the 100 mg/L of $Na_4P_2O_7$ was negative value, which was good for dispersion of metal particle. When $Na_4P_2O_7$ (100 mg/L), PVP($FeCl_3:PVP$ = 1 : 4, w/w) and Pd($FeCl_3:PdCl_2$ = 1 : 0.001, w/w) were used, iron nano particles which were round-shape, well-dispersed and near 100 nm-sized range. In this condition, $FeCl_3$ solution changed with spent Nd leachate solution, and then it is possible to be made round-formed iron nano particles at pH 9 and at the reaction bath over 20 L which is not include any surfactant.