• Journal of Advanced Navigation Technology
• /
• v.27 no.1
• /
• pp.71-76
• /
• 2023

In this paper, a humidity sensor using a microstrip patch antenna(MPA) and polyvinyl alcohol(PVA) is studied. PVA is a polymer material whose permittivity changes with humidity, and a rectangular slot is added to the radiating edge of the MPA, which is sensitive to changes in electric field, in order to increase the sensitivity to changes in relative permittivity. After thinly coating the area around the radiating edge with the rectangular slot of the MPA fabricated on a 0.76 mm-thick RF-35 substrate with PVA, the changes in the resonant frequency and magnitude of the MPA's input reflection coefficient are measured when relative humidity is adjusted from 40% to 80% in 10% increments at a temperature of 25 degrees using a temperature and humidity chamber. Experiment results show that when the relative humidity increases from 40% to 80%, the resonance frequency of the antenna' input reflection coefficient decreases from 2.447 GHz to 2.418 GHz, whereas the magnitude increases from -7.112 dB to -3.428 dB.

• Journal of Industrial and Engineering Chemistry
• /
• v.67
• /
• pp.326-332
• /
• 2018

In this study,the result shows that polyvinyl alcohol-sodium alginate (PVA-SA) gel bead crosslinked with sodium sulfate are better among the different methods by comparing the relative mechanical strength, mechanical strength swelling and expansion coefficient of beads in water. Subsequently, anammox biomass entrapment by PVA-SA gel was introduced into continuous stirred tank reactor (CSTR). After 24 operation days, the nitrogen removal efficiency achieved 60%, while the nitrogen loading rate (NLR) was $0.14kgN/m^3/d$ and the experiment data indicated that PVA-SA gel bead crosslinked with sodium sulfate can be used to initiate anammox process. Furthermore, it is an alternative for culturing anammox in a long-term operation.

• The Korean Journal of Rheology
• /
• v.11 no.1
• /
• pp.28-33
• /
• 1999

Introducing boric acid to the polyviny alcohol(PVA) solutions has a profound effect on the rheological properties through crosslinking between hydroxyl groups of PVA. This study investigates the effect of boric acid on the rheological properties of polyvinyl alcohol(PVA)/dimethyl sulfoxide(DMSO)/water systems in the absence of cations. The viscosity of PVA/ DMSO/water systems containing 1 wt.% boric acid was decreased with increasing water content. PVA/DMSO systems containing 1 wt.% boric acid exhibited rheological properties similar to elastic gels by forming crosslinked structures. On the other hand, PVA/water systems containing 1 wt.% boric acid exhibited rheological properties typical of viscous materials. In-corporation of boric acid into PVA/DMSO system caused a notable change in the viscosity of the system, whereas boric acid had little effect on the viscosity of PVA/water system. PVA/DMSO/boric acid system gave the greatest storage modulus among the PVA solution systems. Increasing water level in the mixed solvent of DMSO and water diminished the storage modulus of the systems.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.38.1-38.1
• /
• 2010

Nanofibers have a large potential in air filtration applications. In this work, we have developed a photocatalytic polyvinyl alcohol PVA/$TiO_2$ nanofibers membrane for the treatment of air filtration by using electrospinning method. PVA were electrospun into nanofibrous membranes and $TiO_2$ nanoparticles were loaded in PVA nanofibers in various contents from 10% (w/w) to 50% (w/w). The UV-Vis spectra were conducted for testing the existence of $TiO_2$ nanoparticles in PVA fibers. SEM analysis indicated that $TiO_2$ nanoparticles were loaded on the surface of PVA fibers and dispersed linearly along the fiber direction, which originated from the effect of polarization and orientation caused by high electric field. X-ray diffraction (XRD) was used to determine the crystalline of the membrane. Tensile strength was measured to evaluate the physical properties of the membrane. Therefore, our work suggested that PVA/$TiO_2$ nanofiber membrane has a potential application in air filtration area.

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.215-218
• /
• 2002

Poly(vinyl alcohol)(PVA)는 1924년 W. O. Herrmann과 W. Haehnel이 Poly(vinyl esters)를 caustic soda 용액에서 비누화하여 합성한 뒤 많은 연구 및 사용되어지고 있는 고분자이다. 환경친화적이고, 인체에 무해하여 인공관절, 콘택트 렌즈 등에 이용이 되고 있다. 특히 구조가 선형적이고 zig-zag구조를 가지기 때문에 고강도, 고탄성을 갖는 섬유의 제조가 가능한 소재이다[1]. PVA섬유의 제조는 용매를 이용한 습식방사 및 겔방사로 섬유를 제조한다. (중략)

• Journal of Wetlands Research
• /
• v.9 no.1
• /
• pp.115-121
• /
• 2007

A novel hydrogen fermentation technique by using polyvinyl alcohol (PVA) gel beads as a biomass carrier was investigated. The hydrogen gas was stably produced throughout the experimental period in a continuous reactor. Even though the hydrogen productivity was suddenly decrease by experimental troubles, the bacteria attached to the PVA gel beads played as an inoculum, it was promptly recovered. The hydrogen yield per glucose was not very high ($1.0-1.2mol-H_2/mol-glucose$), thus the optimization of the experimental conditions such as ORP and HRT should be considered to improve the hydrogen productivity. Bacterial community was stable during experimental period after the PVA gel beads applying, which indicated that applying of biomass carrier was specific to keep not only the biomass but also the bacteria commonly. Clostridium species were phylogenetically detected, which suggested that these bacteria contributed to the hydrogen production in the biofilm attached to the PVA gel beads.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.25 no.4 s.34
• /
• pp.51-55
• /
• 1999

Cosmetic mask is one of the traditional cosmetic product and is used to keep skin healthy and beautiful through moisturizing effect, cleansing effect and acceleration effect on microcirculation. There are several types of cosmetic mask such as peel-off type, tissue-off type, wash-off type and cotton sheet type immersed in cosmetic water. It is important for cosmetic formulators to develop an adequate type of cosmetic mask that meets the needs of the target consumers because each type of cosmetic mask has benefits and problems in its usage and efficacy. Polyvinyl alcohol (PVA) is widely used as an active ingredient of peel-off type cosmetic mask and the physical property of the PVA film changes with the usage of other ingredients. We studied the change of physical properties of the film containing PVA by formulating peel-off type cosmetic mask with the variation of humectants. Methylguceth-20 and glycereth-26 reduce the interaction between skin surface and PVA film without serious weakening of tensile strength and they can alleviate irritation. Glycerin, urea and betaine help PVA film soften and they also have excellent efficacy as humectants.

• Journal of the Korean Applied Science and Technology
• /
• v.25 no.3
• /
• pp.341-346
• /
• 2008

Cellulose nanofibers from microfibril cellulose (MFC) was prepared by hydrobromic acid (HBr) treatment at different concentrations. Polyvinyl alcohol (PVA) composite films at various loading level of nanofibers were manufactured by a film casting method. The analysis of degree of polymerization (DP), crystallinity ($X_c$) and molecular weight ($M_w$) of cellulose after acid treatment was conducted. The mechanical and thermal properties of the cellulose nanofibers reinforced PVA films were characterized using tensile tests and thermogravimetric analysis (TGA). The DP and $M_w$ of MFC by HBr hydrolysis considerably decreased, but $X_c$ showed no significant change. After acid hydrolysis, the diameter of cellulose nanofibers was in the range of 100 to 200 nm. The thermal stability of the films was steadily improved with the increase of nanofiber loading. There was a significant increase in the tensile strength of PVA composite films with the increase in MFC loading. Finally, 5 wt.% nanofiber loading exhibited the highest tensile strength and thermal stability of PVA composite films.

• Journal of Biomedical Engineering Research
• /
• v.39 no.4
• /
• pp.161-167
• /
• 2018

Polyvinyl alcohol/sodium carboxymethyl cellulose (PVA/NaCMC) hydrogels were prepared by physical crosslinking (cyclic freezing/thawing) and gamma (${\gamma}$)-ray irradiation to evaluate the effect of NaCMC concentration (2~8 wt%) on the mechanical properties and the biocompatibility of the PVA/NaCMC hydrogels. The swelling rate of PVA/NaCMC hydrogels regardless of irradiation rose with increasing NaCMC content from 2 wt% to 8 wt%, while the gelation rate was the reverse. As the NaCMC content increased from 2 wt% to 6 wt%, the compressive strength of the hydrogels increased dramatically from $8.5{\pm}2.0kPa$ to $52.7{\pm}2.5kPa$ before irradiation and from $13.5{\pm}2.9kPa$ to $65.5{\pm}8.7kPa$ after irradiation. When 8 wt% NaCMC was added afterwards, the compressive strength decreased however. The irradiated PVA/NaCMC hydrogels containing 6 wt% NaCMC exhibited the tailored properties of the swelling rate of $118{\pm}3.7%$, the gelation rate of $71.4{\pm}1.3%$, the strength of $65.5{\pm}8.7kPa$, respectively, and no cytotoxicity was observed.

• Proceedings of the SCSK Conference
• /
• 1999.10a
• /
• pp.51-55
• /
• 1999

Cosmetic mask is one of the traditional cosmetic product and is used to keep skin healthy and beautiful through moisturizing effect, cleansing effect and acceleration effect on microcirculation. There are several types of cosmetic mask such as peel-off type, tissue-off type, wash-off type and cotton sheet type immersed in cosmetic water. It is important for cosmetic formulators to develop an adequate type of cosmetic mask that meets the needs of the target consumers because each type of cosmetic mask has benefits and problems in its usage and efficacy. Polyvinyl alcohol (PVA) is widely used as an active ingredient of peel-off type cosmetic mask and the physical property of the PVA film changes with the usage of other ingredients. We studied the change of physical properties of the film containing PVA by formulating peel-off type cosmetic mask with the variation of humectants. Methylguceth-20 and glycereth-26 reduce the interaction between skin surface and PVA film without serious weakening of tensile strength and they can alleviate irritation. Glycerin, urea and betaine help PVA film soften and they also have excellent efficacy as humectants.