• 한국세라믹학회지
• /
• 제56권5호
• /
• pp.443-452
• /
• 2019

In this study, TiO₂-polyvinyl alcohol (PVA) composite granules were prepared via spray drying technique. To investigate the effects of solid content and binder/powder ratio in the slurry on the granulation behavior of TiO₂ powders, the feed compositions were designed to vary over a wide range. The morphology, actual densities, and average granule size and size distribution of the TiO₂-PVA composite granules were characterized by using scanning electron microscopy technique, a gas pycnometer, and an image analyzing program (Image-J), respectively. The results indicate that solid content and the amount of PVA in the feedstock slurry are the dominant factors determining the granule morphology, size, and size distribution of TiO₂-PVA composite. Moreover, it was observed that increasing the solid content and the amount of PVA in the slurry improved the granulation process and reduced the granule defects. For the preparation of spherical TiO₂-PVA composite granules with the minimum amount of non-granulated powders, the optimized composition of the feedstock slurry was found to be 35 wt.% solid and 3 wt.% PVA.

• 한국항행학회논문지
• /
• 제24권6호
• /
• pp.627-632
• /
• 2020

본 논문에서는 폴리비닐알코올로 코팅된 마이크로스트립 결함 접지 구조 기반 마이크로파 센서를 이용한 습도 센서의 개발에 대하여 연구하였다. 인터디지털 커패시터 모양의 결함 접지 구조를 마이크로스트립 선로의 접지면에 추가하여 피시험물의 유전율 변화에 민감한 고감도 마이크로파 센서를 설계하였다. 습도에 따라 유전율이 변하는 고분자 물질인 폴리비닐알코올을 제안된 센서의 결함 접지 구조에 얇은 두께로 코팅하였고, 습도에 따른 마이크로파 센서의 전달계수의 공진 주파수와 크기의 변화를 측정하였다. 온습도 챔버를 사용하여 25도에서 상대습도를 40%에서 80%까지 10% 간격으로 증가시켰을 때 전달계수의 공진 주파수는 1.475 GHz에서 1.449 GHz로 감소하였고, 크기는 -32.90 dB에서 -25.67 dB로 증가하였다.

• 한국산학기술학회논문지
• /
• 제20권11호
• /
• pp.537-543
• /
• 2019

세라믹 재료 중 알루미나(Al₂O₃)는 산업에서 널리 사용되는 세라믹 재료로서 최근의 기술발전에 따라 재료 크기가 작아지고 이에 따른 특성이 다양하여 그 중요성이 더해 가고 있다. 본 연구에서는 다양한 알루미늄 알콕사이드 중 Aluminum isopropoxide(AIP)를 출발 원료물질로 하여 졸-겔(Sol-Gel)법에 의해 가수분해 및 해교과정을 거쳐 boehmite 졸을 제조하고 이후 건조 및 하소시켜 γ-Al₂O₃를 제조하였다. 이러한 제조 과정 중 입자의 응집현상을 방지하기 위해 9,000 ~ 10,000, 31,000 ~ 50,000, 89,000 ~ 98,000, 130,000의 분자량을 갖는 4종류의 PVA(Polyvinyl alcohol)를 첨가하고 3종류 질산(0.1, 0.3, 0.5 몰비)을 첨가하여 입자에 미치는 영향을 확인하고자 하였다. 제조된 γ-Al₂O₃는 X선 회절분석기(XRD), X선 형광분석기(XRF), 입도분석기(PSA), 전계방사 주사전자현미경(FE-SEM) 등의 기기분석을 통하여 결정구조 및 조성, 입자크기, 그리고 입자형상을 확인하였다. 그 결과, 약 98.2 %의 순도를 갖는 γ-Al₂O₃가 합성되었으며 첨가되는 질산의 첨가비가 높을수록, 그리고 PVA 분자량이 클수록 입자크기가 감소하고 균일성이 높아지는 것을 확인할 수 있었다. 이러한 결과로부터, PVA와 질산의 첨가비 조절에 따라 γ-Al₂O₃의 제조공정 중 입자크기 제어가 가능할 것으로 사료된다.

• 마이크로전자및패키징학회지
• /
• 제23권1호
• /
• pp.11-15
• /
• 2016

유기발광다이오드(orgianic light emitting diodes, OLEDs)는 대형 유연 디스플레이와 발광원으로서 사물인터넷 (IoT)의 하드웨어 기기 등 다양한 분야에서 연구가 진행되고 있다. 그러나 낮은 일함수의 금속 및 쉽게 반응하는 유기재료 자체의 특성으로 인하여 외부환경에 매우 취약한 단점을 가지고 있으며 특히, 수분과 산소에 민감하여 외부와의 접촉 시 성능이 급속도로 저하되는 현상을 나타내게 된다. 이를 방지하기 위해 PVD, CVD, ALD 와 같은 방법으로 보호막 형성 연구를 진행 중에 있지만 복잡한 공정 및 높은 비용의 문제점 등이 있다. 그러므로 외부 환경에 의한 성능 저하를 차단해주는 저렴하고 단순한 공정의 페시베이션(passivation) 박막 기술 개발이 매우 중요하다. 본 연구에서는 유기발광다이오드의 수명 향상을 위하여 스핀코팅(spin-coating) 방법으로 녹색 유기발광다이오드 소자 위에 조성비에 따른 페시베이션 박막을 형성한 후 녹색 유기발광다이오드의 휘도특성 변화를 조사하였다. 페시베이션 용액은 poly vinyl alcohol (PVA)를 기반으로 sodium alginate (SA)를 0, 10, 20, 40 wt%의 조성비로 제조하였으며, 40 wt%의 조성비에서 가장 좋은 배리어 보호 특성을 나타내었다. 최종적으로 PVA + SA 용액의 최적화된 페시베이션 보호막을 제작할 수 있었다.

• 복합신소재구조학회 논문집
• /
• 제6권1호
• /
• pp.30-37
• /
• 2015

The need to consider torsion in the design of members of a structure has recently been increasing; therefore, many studies on torsion have been carried out. Recent research was focused on the torsional performance of concrete according to the reinforcing materials used. Of particular interest, are torsion studies of beams made of SFRC(steel fiber reinforced concrete), and there has been increasing use of SFRC at construction sites. In contrast, research on the composite PVA-ECC (polyvinyl alcohol-engineered cementitious composite) has only covered its mechanical performance, though it exhibits excellent tensile-strain performance (better than SFRC). Therefore, research on the torsion of concrete beams retrofitted using PVA-ECC is lacking. In this study, the behavior characteristics and performance of reinforced-concrete beams retrofitted by PVA-ECC was investigated experimentally. The experimental results show that the resistance to torsional cracking is increased by PVA-ECC. In addition, the strain on the rebar of the specimen was found to be reduced.

• 한국의류학회지
• /
• 제42권2호
• /
• pp.269-277
• /
• 2018

This study extracted Artemisia capillaris Thunberg with distilled water and ethanol to investigate its antioxidant effect. We then investigated the possibility of producing nanofibers by an electrospinning process by adding the extracts to polyvinyl alcohol (PVA). The electrospinning method used a PVA concentration of 12wt.%, an applied voltage of 10kV, and a tip-to-collector distance of 15cm. Total polyphenol and total flavonoid contents were measured to verify the antioxidant activity of Artemisia capillaris Thunberg extracts (ACEs). The total polyphenol content of the distilled water extract and the ethanol extract were measured as 218.47 and 271.26mg/g, respectively, and the total flavonoid content of the distilled water extract and the ethanol extract were measured as 141.68 and 34.98mg/g, respectively. As the content of the ACEs in the PVA nanofibers increased, the Diameters of the nanofibers and the uniformity of the diameters decreased. The electrospinning process was fabricated in a relatively uniform form without beads, and the diameters of the nanofibers that were produced ranged from 340 to 390nm. The results of FT-IR, XRD and DSC analyses confirmed that the ACEs were well mixed with the PVA molecules and were electrospun.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권3호
• /
• pp.340-345
• /
• 2002

In this experiment, oocytes were collected from goat ovaries available in slaughterhouse by follicle puncture method. Morphologically culturable type of oocytes which having compact, multilayered cumulus granulosa cell complex and evenly granulated cytoplasm, was separated under a stereozoom microscope. Oocytes were washed thoroughly in maturation medium containing TCM-199, $1{\mu}g/ml$ estradiol-$17{\beta}$, 0.5 ${\mu}g/ml$ FSH, $100{\mu}g/ml$ LH, 3 mg/ml BSA and 10% estrus goat serum. Washed oocytes were cultured into maturation medium on granulosa cell monolayer. Culture plate was then kept into $CO_2$ incubator at $38{\pm}1^{\circ}C$, maximum humidity and 5% $CO_2$ for 18 h. After maturation the oocytes were washed thoroughly with maturation medium containing polyvinyl alcohol (PVA) without serum and BSA and further cultured for 12 h for secretory proteins of oocytes. PVA medium was collected, pooled and concentrated by 5000 cut off centrisart. Secretory proteins were separated on 12.5% SDS-PAGE. A total number of 3.41 oocytes per ovary were obtained and 2.17 culturable oocytes per ovary were cultured into maturation medium. After 18 h of maturation, 4,567 oocytes (1.82 oocytes per ovary) were further cultured into serum and BSA free PVA medium for its secretory proteins. Four secretory proteins of oocytes with approximately molecular weight of 45, 55, 65 and 95 kDa were obtained on SDS-PAGE in silver staining and three proteins with approximately molecular weight of 45, 55 and 65 kDa in Coomassie brilliant blue staining. In conclusion, four secretory proteins with approximately molecular weight of 45, 55, 65 and 95 kDa was obtained from in vitro cultured oocytes of goats.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.145-149
• /
• 2006

The effect of alkaline environmental condition on durability of GFRP composites according to additives has been investigated. Additives used were polyvinyl alcohol (PVA), kaolin and alumina powder. Weight gains increased with immersion time in all GFRP composites at $80^{\circ}C$. But weight gain of specimen added PVA did not differ through the whole immersion time in both tap water and alkaline solution at 20 and $80^{\circ}C$. Tensile strength decreased with immersion time in all environment conditions. Tensile strength of GFRP composites regardless of additives decreased rapidly up to 5 days of immersion and then decreased slowly up to 30 days in alkaline solution environment at $80^{\circ}C$. The weight gains were not much difference in both tap water and alkaline solution at $20^{\circ}C$. But the ones of GFRP composites added PVA was smaller than the composites without additive in all aqueous at $20^{\circ}C$. Test strength of GFRP composites added polyvinyl alcohol has improved through the whole immersion time in both tap water and alkaline solution environment at $20^{\circ}C$.

• 반도체디스플레이기술학회지
• /
• 제17권3호
• /
• pp.41-45
• /
• 2018

Two-dimensional (2D) materials have been studied extensively due to their excellent physical, chemical, and electrical properties. Among them, we report the material and device characteristics of tin disulfide ($SnS_2$). To apply $SnS_2$ as a channel layer in a transistor, $SnS_2$ channels were formed by a stripping method and a transfer method. The limitation of this method is that it is difficult to produce uniform device characteristics over a large area. Therefore, we directly deposited $SnS_2$ by atomic layer deposition (ALD) and then performed lithography. This method was able to produce devices with repeatable characteristics over a large area. However, the $SnS_2$ film was damaged by the acetone used as a photoresist (PR) developer during the lithography process, with the electrical properties of mobility of $2.6{\times}10^{-4}cm^2/Vs$, S.S. of 58.1 V/decade, and on/off current ratio of $1.8{\times}10^2$. These results are not suitable for advanced electronic devices. In this study, we analyzed the effect of acetone on $SnS_2$ and studied the device process to prevent such damage. Using polyvinyl alcohol (PVA) as a passivation layer during the lithography process, the electrical characteristics of the $SnS_2$ transistor had $2.11{\times}10^{-3}cm^2/Vs$ of mobility, 11.3 V/decade of S.S, and $2.5{\times}10^3$ of the on/off current ratio, which were 10x improvements to the $SnS_2$ transistor fabricated by the conventional method.

• 생물환경조절학회지
• /
• 제18권2호
• /
• pp.124-131
• /
• 2009

소형의 담액 수경재배기를 이용하여 기본 배양액에 셀레늄(Se) 1mg $L^{-1}$과 계면활성제 PVA-95(polyvinyl alcohol-95) 1, 2, 4mg $L^{-1}$과 CLS(calcium lignosulfonate) 5, 25, 50, 100mg $L^{-1}$을 처리하여 청경채와 상추 식물체의 Se과 양이온 함량, 생육, 그리고 비타민 C 함량을 조사하였다. 생육은 처리간에 차이는 있지만 종류와 농도 별로 일정한 경향을 보이지 않았다. 총 비타민 C 함량은 두 작물 모두 모든 처리구에서 대조구에 비해 약간 증가하는 경향을 보였으나 유의성은 없었다. K 함량은 싱추의 경우는 일정한 경향이 없었지만, 청경채의 경우 Se 1+PVA-95 4mg $L^{-1}$ 처리구가 가장 높았고, Se 1+CLS 처리에서는 대조구에 비해 5mg $L^{-1}$ 농도에서는 증가하였지만 처리 농도가 증가할수록 감소하였다. Ca 함량은 두 작물 모두 Se 1+PVA-95와 CLS 처리에서 대조구에 비해 증가하였다. Mg 함량은 상추에서는 계면 활성제 처리에 의한 Mg 함량의 변화가 없었으며, 청경채에는 Se 1+CLS 25mg $L^{-1}$ 처리구가 대조구에 비해 증가하였고 기타 처리는 차이가 없었다. 식물체내 Se 함량은 상추에서는 계면 활성제 PVA-95 처리와 CLS 처리가 대조구에 비해 Se 함량이 모두 높았고, PVA-95 처리에서는 농도의 증가에 따라 Se 함량이 낮아졌으며, CLS 처리에서는 50mg $L^{-1}$ 까지는 높아졌지만 100mg $L^{-1}$에서는 낮아졌다. 청경채의 엽내 Se 함량은 계면활성제 PVA-95 처리가 큰 효과가 없었으나 CLS 25mg $L^{-1}$ 처리에서 현저히 증가되었다.