• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 C
• /
• pp.458-460
• /
• 2000

We attempted to fabricate polyurethane derivatives (PU-CN, PU-DCM) LB films by using LB method. Also, we investigated the monolayer behavior at the air-water interface by surface pressure-area ($\pi$-A) isotherms. And, the surface morphologies and the physicochemical properties of LB films were investigated by atomic force microscopy (AFM) and UV-vis spectroscopy, respectively. Also, the electrical properties of polyurethane derivatives LB films were investigated by using the conductivity, the dielectric constant and activation energy. In the surface morphologies, physicochemical, electrical properties of polyurethane derivatives LB films, the properties is different as to the Polyurethane derivatives, it is considered that this phenomena could be described by the difference of lumophore pendant which was adhered at PU main chain.

• 공업화학
• /
• 제4권3호
• /
• pp.616-626
• /
• 1993

유연성과 강인성이 우수하여 탄성체로 널리 사용되어지고 있는 폴리우레탄(PU)을 이용하여 폴리메틸메타크릴레이트(PMMA)의 물성향상을 검토하여 보았다. PU와 PMMA블렌드의 분자량과 폴리올의 종류가 블렌드의 물성과 상용성에 미치는 영향을 관찰하기 위하여, 분자량 또는 폴리올의 종류가 각기 다른 ether type과 ester type의 PU를 합성하여서, 이를 PMMA와 블렌드 하였다. 블렌드의 인장강도는 Instron을 이용하여서 측정하였고, Scanning Electron Microscopy(SEM)와 Differental Scanning Calorimetry(DSC)를 이용하여서 두 고분자의 상용성의 변화에 따른 형태학과 유리전이온도 변화를 측정하였으며, haze meter를 이용하여 투명성을 측정하였다. 그러나, PU와 PMMA 두 고분자의 본질적인 비상용성으로 인하여 블렌드를 통한 PMMA의 물성 개량은 큰 성과를 얻지 못하였다. 따라서 PU와 유사한 화학구조를 가지고 있으면서, 양말단에 비닐기가 도입된 형태인 폴리우레탄 디메타아크릴레이트(PUD)를 합성하여서 메틸메타크릴레이트와 공중합하여 가교 공중합체를 합성하였으며, 이 가교 공중합체의 기계적 물성을 Instron, Izod type(Cantilever Beam)impact tester와 haze meter 등을 이용하여 측정하였다. 그 결과 PMMA 단독수지의 투명성을 유지하면서 내충격성이 상당히 개선된다는 것을 확인할 수 있었다.

• 폴리머
• /
• 제25권1호
• /
• pp.41-48
• /
• 2001

폴리카프로락톤디올(PCD) 및 폴리에틸렌글리콜(PEG), 디이소시아네이트 및 1,2,6-헥산트리올을 용액중합 방법으로 반응시켜 폴리우레탄(PU) 마이크로겔을 합성하였다. PCD/PEG의 몰비가 다른 마이크로겔의 임계 겔화농도의 성질과 생성에 영향을 주는 중요한 인자임을 알았다. 디이소시아네이트, PCD/PEG의 몰비 및 PEG의 분자량을 달리하여 제조한 PU 마이크로겔의 물리적 및 열적 성질을 실험하였다. PU 마이크로겔은 300nm 이하의 다분산성 구형의 작은 입자로 분포되어 있으며, 저점도 특성을 나타내었다.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제5권2호
• /
• pp.163-170
• /
• 2002

In this paper, silk fibroin (SF)/polyurethane (PU) blend films were fabricated to develop a new biomaterial for biomedical applications. These blend films were prepared using formic acid as a cosolvent, and structural characteristics and properties of blend films were investigated. FTIR results suggested that there was no specific interaction between SF and PU, implying molecular immiscibility in SF/PU blend films. Furthermore, it was revealed by XRD method that the crystalline region of blend components was not perturbed by counterpart polymers. The degree of phase separation of SF/PU blend films was diminished by increasing PU content in blend. Especially, the blend with 70% content of PU showed no evidence of macro-phase separation in SEM observation. However, SF/PU blend (70/30) was revealed to be phase-separated in a lower dimension confirmed by DMTA measurement. TGA result showed that thermal decomposition temperature of blend film was slightly decreased compared to those of SF and PU polymer itself, Though mechanical properties of SF/PU blend films were not good enough due to the solvent, blood compatibility of PU can be enhanced markedly by mixing with SF for SF/PU blend film.

• Elastomers and Composites
• /
• 제58권3호
• /
• pp.121-127
• /
• 2023

The effect of diisocyanate type on the decomposition temperature of polyurethane (PU) hydrolysis was investigated in a subcritical water medium up to 250℃. PU samples were prepared using different types of diisocyanate: two aromatic diisocyanates (4,4'-methylene diphenyl diisocyanate (MDI) and methyl phenylene diisocyanate (TDI)), one unbranched aliphatic diisocyanate (hexamethylene diisocyanate (HDI)), and two cyclic aliphatic diisocyanates (4,4'-methylene dicyclohexyl diisocyanate (H₁₂MDI) and isophorone diisocyanate (IPDI)). The pressure had no effect on hydrolysis in the range of 70-250 bar. The decomposition temperature of the PU samples increased in the following order: TDI-PU (199℃) < H₁₂MDI ≈ IPDI ≈ HDI (218-220℃) < MDI-PU (237℃). This order of increase in temperature is related to the electron-donating ability of the group to connected to the nitrogen of the urethane unit. When the temperature of the (PU + water) mixture reached the specific decomposition temperature, the PU samples hydrolyzed completely within 5 min into primary amine and 1,4-butanediol. The hydrolysis products from MDI-PU and H₁₂MDI-PU were separated into a liquid phase rich in (BD + water) and a solid low phase rich in amine, whereas the products from TDI-, IPDI-, and HDI-PU existed in a single aqueous phase.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권8호
• /
• pp.371-375
• /
• 2001

We attempted to fabricate polyurethane derivatives (PU-CN, PU-DCM) LB films by using LB method. Also, we investigated the monolayer behavior at the air-water interface by surface pressure-area (${\pi}$-A) isotherms. The surface morphologies and the physicochemical properties of LB films were investigated by atomic force microscopy(AFM) and UV-vis spectroscopy, respectively. And, the electrical properties of polyurethane derivatives LB films were investigated by using the conductivity and the dielectric constant. In the surface morphologies, physicochemical and electrical properties of polyurethane derivatives LB films, the properties is different as to the polyurethane derivatives, it is considered that this phenomena could be described by the difference of lumophore pendant which was adhered at PU main chain.

• Elastomers and Composites
• /
• 제31권2호
• /
• pp.104-110
• /
• 1996

The polyurethane was synthesized by the reaction of polycaprolactone diol(Mw 2000), 4,4'-diphenylmethane diisocyanate and 1,4-butanediol as the chain extender. Also, the modified polyurethane polymers based on liquid polybutadiene as a part of soft segment and dimethylolpropionic acid as a chain extender, giving polyurethane with various polarity, were synthesized. The thermal, mechanical, adhesion properties and water contact angles of the polyurethanes were examined. From the result of the water contact angle, the polarity of the acid modified PU containing 6% acid content was unchanged but mechanical and adhesion properties were improved. The water contact angles on polybutadiene modified PU films were increased with increasing polybutadiene content. The mechanical properties of the polybutadiene modified PU were higher than that of acid modified PU. However, the mechanical properties were reduced as polybutadiene content increased. The result is presumably due to phase separation between hard segment and soft segment. The peel strength of the polyurethane introduced with 5wt% polybutadiene was improved about 150% than that of unmodified PU. The same as the mechanical properties, the more polybutadiene was introduced, the lower peel strength was obtained.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2001년도 가을 학술발표회 논문집
• /
• pp.348-350
• /
• 2001

Polyurethane(PU)은 내마모성, 내약품성, 내용제성이 좋으며 내노화성과 산소에 대한 안정성이 뛰어난 고분자로서 spandex를 비롯하여 코팅, 고무, 도료, 플라스틱, 복합재료 등의 여러 분야에서 이용되어지며 PU를 전기방사 하여 얻은 부직포는 wound dressing, anti-bacteria mask, 인조 피혁, stent 등에 이용할 수 있을 것으로 기대된다. (중략)

• 한국화재소방학회논문지
• /
• 제20권4호
• /
• pp.110-115
• /
• 2006

폴리우레탄에 인계 화합물을 첨가하여 폴리우레탄폼을 제조하였으며, 인계 화합물이 제조된 폴리우레탄폼의 기계적 물성과 난연성에 미치는 영향에 대하여 고찰하였다. 폴리우레탄과 인계 난연제인 Tri(chloroisopropyl) phosphate(TCPP), Triethyl phosphate(TEP), Trimethyl phosphate(TMP) 각각을 약 $90^{\circ}C$에서 혼합시켜 혼합물로부터 제조된 경질 폴리우레탄폼에 대한 여러 실험을 통하여 기계적 물성뿐만 아니라 난연 효과도 상당히 향상됨을 확인하였다. Cone calorimeter를 이용하여 열방출율(heat release rate, HRR)을 측정하여 난연 첨가제의 함량에 따른 재료별 난연 특성을 평가하였다. 그리고 Scanning Electron Microscope(SEM)을 사용하여 난연제를 첨가하여 만든 폴리우레탄폼의 morphology를 관찰한 결과 순수한 폼과 마찬가지로 매우 균일한 형태의 cell 분포를 가짐을 확인하였다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2003년도 The 4th Korea-Italy Workshop
• /
• pp.87-89
• /
• 2003

Thermoplastic polyurethane(PU)-based blend membranes were prepared by the solvent evaporation process. The gas sorption, diffusion, and permeation properties of PU-based blend membranes have been studied. The morphology of PU-based blend membranes was investigated by SEM. The result showed that phase separation occurred with increasing blend ratio. $CO_2$ permeation behaviors of blend membranes were affect by blend composition. Thermoplastic polyurethane(PU)-based membranes showed high $CO_2$ permeation and $CO_2$/$N_2$ selectivity of the blend membrane was improved with increasing the blend ratio.