• Journal of Adhesion and Interface
• /
• v.11 no.1
• /
• pp.35-40
• /
• 2010

In this study, solvent based polyurethane (PU) adhesives were prepared with the hydrocarbon resin and the acrylic modified hydrocarbon resin contents. The solvent based PU adhesive were increased with increasing tackifier concentration. The surface state of films showed good compatibility with increasing the PX-95 concentration but A-1100 series didn't present homogeneous phase more than 10 phr. Mechanical strength and peel strength were maximum at 5 phr tackifier concentration especially PX-95 series in solvent based PU adhesive.

• Polymer(Korea)
• /
• v.31 no.6
• /
• pp.543-549
• /
• 2007

We synthesized various polyurethanes(PU) haying different hard segments with different molecular weights of the soft segment to explore the effect of structure on the dispersion of silver particle in the phase of synthesized polyurethanes matrix. The thermal stability was increased by increasing the number of aromatic compound, while the degree of dispersion for silver particle was decreased. Silver particles showed better dispersion in the PU matrix having aromatic compounds when the soft segments were held constant. On the contrary, when the hard segment was held constant, silver particles on the PU matrix haying low $M_w$ of soft segment showed better dispersion than high $M_w$ of soft segment because poor chain mobility of low $M_w$ of soft segment restricted re-aggregation of silver particle. A sheet resistance of composite materials showed different aspects. In this case, the inter connection between silver particles was more important than its dispersion. In this study, the NDI-PEG 900/silver particle composite film showed the best thermal stability and electro conductivity.

• Elastomers and Composites
• /
• v.43 no.1
• /
• pp.18-24
• /
• 2008

An oligomeric diol was utilized as a modifier for the reaction rate and mechanical properties of a RT-castable polyurethane elastomer. Both the reaction rate and the tensile strength of the blend samples, in which the modifier and the base resins were mixed with one-shot method, showed an exponential decrease as the increase of modifier concentration. Thermal analysis method of Kissinger was also effectively applied in the present study, showing good linearity in the plot of ln $(q/T^2_p)$ vs. $(1/T_p)$ and activation energy $E_a$ of 44.80 kJ/mol, which is similar to the general castable polyurethane. In the mechanical properties, remarkable decrease of strength was found by the addition of modifier concentration range up to about 20 phr, while characteristic elongation property of the elastomer, high elongation at lower strength, was observed over 20 phr of the modifier. Exponential decrease of the break strength of the blend sample exhibited that the mechanical properties of the blend might be considerably sensitive to the modifier concentration.

• Polymer(Korea)
• /
• v.26 no.2
• /
• pp.193-199
• /
• 2002

The dichloro-polyester polyol (DCBAO) which was synthesized in our earlier work was cured at room temperature with two different type of curing agents including Desmodur N-3300 and Desmodur L-75 to get a polyurethane flame-retardant coatings (DCBAO/N-3300=DEBAN and DCBAO/L-75=DCBAL). We could not observe any deterioration of physical properties of the flame-retardant PU coatings (UCBAN and DCBAL) in comparison with the conventional PU coatings. Thermal resistance of DCBAL-type flame-retardant coatings, which was measured by yellowness index difference, was inferior to that of DCBAL-type PU coatings. We believe that this phenomena is attributed to the poor thermal resistance of Desmodur L-75 isocyanate. It was observed that the LOI values were 25∼26% for the PU coatings containing 20∼30 wt% of 2,4-dichlorobenzoic acid.

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.470-473
• /
• 2002

나일론 6은 유연한 분자사슬로 구성된 고분자이지만 분자간에 많은 수소결합을 형성 하고 있기 때문에 비교적 높은 용융온도를 가지고 있으나 연신성이 좋지 않고 고탄성의 섬유를 얻기가 어려우며 상온 및 저온에서의 내충격성도 취약하다고 알려져 있다[1]. 나일론 6의 이러한 단점은 각종 산업용소재로 이용할 경우 많은 문제점을 유발하게 되어 이를 극복하기 위한 연구들이 시도되고 있다. 그중 나일론 6에 액체암모니아나 요드 등을 이용하여 가소화 하거나 용제를 사용함으로써 해결하고자 하는 연구들이 진행되어 왔었다[2,3]. (중략)

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2002.11a
• /
• pp.311-315
• /
• 2002

Polyurethane 발포체는 우수한 단열 및 흡음특성 그리고 반응물질인 polyol과 isocyanate의 성분 및 배합비에 따라 여러가지 제품군으로 특성 설계가 가능하여 LNG 저장탱크, LNG 유조선의 cryogenic insulator, 육상 및 해상용 냉동 및 냉장시설물, 가전제품, 건축단열판넬 등에 널리 사용되고 있다. 그러나 난연성의 결여로 화재 발생시 급격한 연소반응과 유해가스 발생을 동반하여 화재안전 및 건강보건상 중대한 단점을 가지고 있다. 본 연구진은 PU발포체의 물성개선을 통한 난연특성 연구의 일환으로서 montmorillonite, hectorite, vermiculite의 layer silicate를 urethane 원료물질과 혼성발포 공정을 통해 난연복합체를 제조하여 UL94V, LOI, Morphology 등의 시험을 수행하였다.(중략)

• Proceedings of the KOSOMBE Conference
• /
• v.1990 no.11
• /
• pp.61-63
• /
• 1990

To develop better blood compatibility of commercial polyurethane(PU), PU surface was chemically modified wi th a hydrophobic perfluorocarhon or a hydrophilic polyethylene oxide(PEO) and/or sulfonated groups, respectively. The water contact angle of modified PUs varied from $110^{\circ}$ to $0^{\circ}$. All the modified PUs were more blood compatible than untreated PU. In particular, PEO-sulfonate grafted PUs showed a very enhanced antithrombogenicity due to the synergistic effect of PEO and $SO_3$ groups. Therefore more hydrophobic and hydrophilic PU surfaces are promising for improving the blood compatibility.

• Textile Coloration and Finishing
• /
• v.7 no.3
• /
• pp.15-21
• /
• 1995

Polyurethane microcapsules containing dibutylphthalate(DBP) were perpared by the interfacial polymerization using diisocyanates and polyois. Effects of chemical structure of PU, dispersing agent and polymerization time on the mean diameter of microcapsules were investigated. The releasing of DBP from microcapsules depended on the chemical structure of PU and solvents. The diameter decreased with increasing dispersing agent concentration, and it is decreased in the order of the dispersing agents using gelatine > PVA > arabic gum at the same concentration. A slight increase in the diameter was observed when the ratio C$H_2$/OOCNH of PU was increased. As the ratio C$H_2$/OOCNH of PU was increased, the amount of extracted DBP for hexane using as a extracting solvent was decreased, however, it was not changed for THF.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.10a
• /
• pp.427-428
• /
• 2009

In the manufacture process of refrigerator cabinet, polyurethane(PU) liquid firstly is injected between outer plate and inner case in high temperature about $40^{\circ}C$, and PU foam is generated and solidified to the room temperature. There will be great residual stress in the PU foam, especially at the corners after the whole refrigerator is completely assembled. The stress condition will become more complicated under operating condition because of the large temperature difference between the freezing room and outer plate. And also, there are great differences of properties for plastic and steel which would cause different deformation under temperature gradient. The steel outer plate would expand compared to the PU foam or ABS material under operation condition, which induces a thermally bowing deformation in the refrigerator cabinet. The objective of this paper is to design an optimum bead structure or to use reinforcement in the refrigerator except for improving material properties in order to decrease the deformation.

• Elastomers and Composites
• /
• v.40 no.4
• /
• pp.242-248
• /
• 2005

To study the fatigue properties of three type of foams for footwear midsole, polyurethane(PU), phylon(PH) and injection phylon(IP) foams were prepared with different hardnesses. Three types of foams were repetitively compressed for 50,000 cycles at 50 rpm. Cell shapes of foams were deformed with repetitive compression. The extent of cell deformation of IP was larger than those of PH and PU. Permanent strain of foam was made by repetitively compressing the foam, and the extent of IP was larger than those of PU and PH. Maximum compression forces of three types of the foams were decreased with the repetitive compression, and IP had the largest decrease in compression load of foam with compression. Decreases in maximum compression force of three types of foams were increased with increase of the hardness of foam.