• 한국인터넷방송통신학회논문지
• /
• 제12권4호
• /
• pp.103-109
• /
• 2012

본 논문은 현재 급격히 증가하는 전력을 효율적으로 관리하고 낭비를 최소화하기 위한 전력 관리 시스템을 제안한다. 기업, 공장, 관공서, 학교 등의 환경에 최적화된 USN(Ubiquitous Sensor Network)을 기반으로 한 산업용 전력관리시스템을 구현하였다. 콘센트에 직접 부착하여 전력량 측정 및 전력제어가 가능하다. 전력센서를 PLC(Power Line Communication)와 TCP/IP 통신을 통하여 하나의 네트워크로 구성하고 전력을 감시 및 제어한다. 수집된 데이터를 기반으로 전력을 효율적으로 유지관리 할 수 있으며, 또한 안드로이드 기반 앱을 통하여 언제 어디서나 서버에 접속하여 전력량을 관리하고 낭비되는 전력을 효율적으로 관리할 수 있는 시스템을 구현하였다.

• 동력기계공학회지
• /
• 제17권2호
• /
• pp.114-120
• /
• 2013

This study was carried out to investigate the relationship between mechanical properties and damping capacity in high manganese austenitic stainless steel with two phase mixed structure of reversed austenite and deformation induced martensite. Reversed austenite of ultra-fine grain size less than $0.3{\mu}m$ was obtained by reversion treatment. Two phase structure of deformation induced martensite and reversed austenite was obtained by annealing treatment at range of $500^{\circ}C{\sim}700^{\circ}C$ for various time in cold rolled high manganese austenite stainless steel. In stainless steel with two phase mixed structure of martensite and austenite, damping capacity decreased rapidly with the increasing hardness and strength. With the increasing elongation, damping capacity was increased rapidly and then, slowly increased.

• 한국인터넷방송통신학회논문지
• /
• 제14권5호
• /
• pp.123-129
• /
• 2014

본 논문은 급격히 증가하는 전력 다소비환경(가정, 건물, 기업, 공장 등)에서 에너지 절감시스템 구현을 통해 낭비되는 전력수요를 효율적으로 관리하는 시스템을 제안한다. 무선 ICT(Information & Communication Technology)기반의 에너지관리시스템은 사용자가 언제 어디서든 인터넷 접속만으로 Web Browser 및 안드로이드 기반 앱을 통해 Smart Power Outlet(콘센트형)을 원격관제 하며, 실시간 전력 사용량 모니터링 및 적산 데이터 분석으로 전력 에너지 수요관리를 효율적으로 수행한다. 기존 유무선 통신방식의 거리제약 및 설치 문제를 무선 Zigbee 통신 및 Mesh Network방식의 Smart Power Outlet를 통해 해결방안을 제시하고 게이트웨이는 Zigbee와 TCP/IP방식의 ESS(Energy Saving System)와 네트워크를 구성하여 효율적인 전력관리 시스템을 구현하였다.

• 한국주조공학회지
• /
• 제27권4호
• /
• pp.179-183
• /
• 2007

The TiC layer was formed on Ti and Ti alloys by plasma carburizing method. The main experimental parameters for plasma car boozing were temperature and time. XRD, EDX, hardness test and corrosion test were employed to analyze the evolution and material properties of the layer. The preferred orientation of TiC layers is (220) at treated temperature of $700^{\circ}C\;and\;880^{\circ}C$ However, it is changed to (200) at temperature of $800^{\circ}C$ The thickness of carbide layer increase with increasing carburizing temperature. Highest hardness of hardened layer formed on CP-Ti was obtained at the carburizing condition of processing temperature $880^{\circ}C$ and processing time 1080min. The corrosion potential of carburizing specimen was higher than untreated CP-titanium, and corrosion potential increased as carburizing temperature and time increased. Thus the corrosion resistance of CP-Ti was greatly enhanced after plasma carburizing treatment.

• 한국정밀공학회지
• /
• 제26권12호
• /
• pp.85-93
• /
• 2009

This research is intended to grasp the characteristics of heat flow inside auxiliary power device engine room to obtain the design basic data through numerical analysis and experiment. For experiment cost reduction, numerical analysis was done to obtain quantitative data by observing the change in temperature distribution of major parts according to changes in normal condition, incompressible condition, engine surface heat emission rate and absorption temperature with the use of commercial STAR-CD. The experiment was done by grasping the temperature distribution of major interested parts inside engine room in loaded and unloaded conditions during engine operation. The temperature distribution data here will serve as useful design data during APU engine room designing.

• 정보통신설비학회논문지
• /
• 제2권2호
• /
• pp.14-21
• /
• 2003

우리나라 IT 기업은 1997년 9,000여개였으나 2002년에는 21,000여개 업체로 4년만에 2배 이상의 숫적인 증가를 보였고, 종사자수는 1997년 40만 여명에서 2002년에는 50만 여명으로 증가하였다. 국내 IT 산업의 생산 및 GDP 비중은 1997년 76조원 2002년 190조원으로 증가하였고, IT 분야에 대한 정부지원은 직접적인 자금지원방식과 간접적인 인력양성지원, 기반환경조성 등 다양한 형태로 추진되고 있다. 본 연구에서는 IT 기업에 대한 정부출연사업은 정부의 기업에 대한 직접지원 방식으로 시장원리와 는 무관하게 일종의 보조금 형식으로 지원하고 있는데 정부지원금의 지원 내용과 지원방법 등을 살펴보고 그 개선 전략을 제안한다.

• Corrosion Science and Technology
• /
• 제9권6호
• /
• pp.289-293
• /
• 2010

To investigate the corrosion behavior of tools steel surface in various coating film, the surface of hard coated Ti-Zr-N film on the tool steel by using magnetron-sputtering methods was researched using various experimental methods. STD 61 steels were manufactured by using vacuum furnace and solutionized for 1hr at $1050^{\circ}C$. Steel surface was coated with Ti-Zr-N film at $150^{\circ}C$ and 100W for 1h by using DC-sputtering equipment. Surface characteristics of Ti-Zr-N film coated specimens were investigated by OM, XRD, FE-SEM and nano-scratch tester. And corrosion behaviors of the coated specimen were investigated by polarization test and electrochemical impedance spectroscopy(EG&G Co, PARSTAT 2273. USA). It was found that Ti-Zr-N film coated sample had a thick coated layer and showed a good wear resistance and corrosion resistance of surface compared with ZrN and TiN coated sample. The corrosion resistance and mechanical property of Ti-Zr-N film coated STD 61 alloy increased as sputtering time increased.

• 한국전기전자재료학회논문지
• /
• 제33권4호
• /
• pp.326-330
• /
• 2020

Small-scale production control systems for smart manufacturing are becoming increasingly necessary as the manufacturing industry seeks to maximize manufacturing efficiency as the demand for customized product production increases. Correspondingly, the development of an embedded system to realize this capability is becoming important. In this study, we developed an embedded system based on an open source system that is cheaper than a widely applied programmable logic controller (PLC)-based production control system that is easier to install, configure, and process than a conventional relay control panel. This embedded system is system is based on a low-power, high-performance Cortex M4 processor and can be applied to smart manufacturing. It is designed to improve the development environment and compatibility of existing PLCs, control small-scale production systems, and enable data collection through heterogeneous communication. The real-time response characteristics were confirmed through an operation test for input/output control and data collection, and it was confirmed that they can be used in industrial sites.

• 한국전기전자재료학회논문지
• /
• 제33권6호
• /
• pp.510-514
• /
• 2020

Vocational education needs to be transformed to cultivate talents with diverse fusion competencies, which is in line with the recent changes that have become a part of the complex technological developments in the 4th Industrial Revolution. Therefore, it is very important for college graduates to obtain employment skills as they are required to prepare for careers within the complex environments of future societies. With the transition to the Internet of Things (IoT)-based control in the manufacturing industry, the development of technological education and related training programs is required to cultivate practical talents for students who have acquired not only the information on existing programmable logic controller (PLC)-based technology, but also that on embedded programming technology. Therefore, to develop an NCS-based education program for analog signal processing to ensure that programming can easily be learned for cultivating practical talent, this study summarizes the opinions of field experts, selects the appropriate NCS competency unit, and designs an adequate technology education training program.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.482-483
• /
• 2007

For measurement of dielectric constants, the commercial parallel plate electrodes system with guard-ring electrode have been widely used up to now. The capacitance derived from the parallel plate electrodes capacitor with guard-ring electrode is calculated by the equation of ($C={\epsilon}\;{\cdot}\;\frac{area\;of\;electrod}{distance\;between\;electrodes}$). Therefore, in parallel plate electrode capacitor, the diameter of the guarded electrode, the gap size between guarded electrode and guard ring, and distance between two active electrode should be measured precisely to calculate dielectric constants from the measured capacitance. Consequently their mechanical measurement uncertainties are directly contributed. Especially the air-gap between the electrodes and dielectric specimen at the system must be existed and the measurement error derived from the air-gap is impossible to evaluate as measurement uncertainties. In this study, we analyze the uncertainty of the commercial dielectric constant test cell using 3 kinds CRMs.