• Bulletin of the Korean Chemical Society
• /
• v.32 no.12
• /
• pp.4221-4226
• /
• 2011

Honeycomb-patterned polyvinypyrrolidone (PVP) thin films coated with nanometer-sized silver particles were prepared using honeycomb-patterned polystyrene (PS) template films fabricated by casting a polystyrene solution under humid condition. Silver was first metallized on the patterned PS films via silver nitrate ($AgNO_3$) reduction using tetrathiafulvalene (TTF) and a small amount of PVP as the reductant and dispersing agent, respectively. The effects of $AgNO_3$, TTF, and PVP solution concentrations during the reduction process in acetonitrile were determined to obtain a uniform silver-coated honeycomb-patterned PS film. Second, the silver-metallized patterned porous PS films were filled with high PVP concentration solutions via the spincoating process. Silver-coated patterned PVP films were obtained by peeling off the PVP layer from the template PS film after drying. The results show that the honeycomb-patterned PVP films uniformly coated with silver particles are conveniently obtained using the silver-coated patterned PS template, although the direct fabrication of these films using water droplets under humid conditions was not feasible because of the water solubility of PVP.

• Applied Chemistry for Engineering
• /
• v.16 no.4
• /
• pp.513-518
• /
• 2005

The co-pyrolysis characteristics of poly(vinyl chloride) (PVC) and polystyrene (PS) mixtures with ZnO have been studied by thermogravimetry (TG) and gas chromatograph-mass spectrometry (GC-MS) under various mixing ratios and reaction temperatures. From this work, it was found that the yield of liquid products increased as PS in mixtures increased, whereas that of gaseous products decreased. And as ZnO in mixtures increased, the yields of gaseous products and HCI decreased. The optimal reaction temperature for the maximum yield of liquids products and the control of HCI gas was $500^{\circ}C$.

• Macromolecular Research
• /
• v.15 no.2
• /
• pp.173-177
• /
• 2007

Living anionic and cationic polymerizations have been combined to prepare various types of comb-like copolymers composed of polystyrene (PS) and polyisoprene (PI) blocks, with a precisely controlled architecture. According to the relative placement of these elementary building blocks, combs with randomly distributed PS and PI or with poly(styrene-b-isoprene) diblock branches (I & II, respectively) can be prepared. The reaction procedure initially includes the synthesis of a poly(chloroethylvinyl ether) using living cationic polymerization, which is used as the reactive backbone to successively graft $PS^-Li^+$ and $PI^-Li^+$ or $PI-b-PS^-Li^+$ to obtain structures (I) or (II). The synthesis of Janus-type PS-comb-b-PI-combs (III) initially involves the synthesis of a diblock backbone using living cationic polymerization, which bears two distinct reactive functions having either a protected or activated form. Living $PS^-Li^+$ and $PI^-Li^+$ are then grafted, in two separate steps, onto each of the reactive functions of the backbone, respectively.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.2 s.35
• /
• pp.181-186
• /
• 2005

We fabricated thin films of polystyrene-block-poly(methyl methacrylate)(PS -b-PMMA) on the self-assembled monolayers(SAM) of 3-(p-methoxyphenyl)propyltrichlorosilane(MPTS) on silicon wafers. Cylindrical nanodomains of PMMA or PS were oriented perpendicular to the surface of silicon wafers due to the neutral affinity of the SAM to PS and PMMA blocks. By selective removal of the PMMA block with UV irradiation and washing, nanoporous films and nanorod assemblies were produced. The nanoporous film can be used for a nanolithographical mask.

• Elastomers and Composites
• /
• v.45 no.1
• /
• pp.17-24
• /
• 2010

Herein, the effect of the dispersion uniformity of the multi-wall carbon nanotube (MWCNT) on the thermal and electrical conductivity of polystyrene (PS)/MWCNT composite was investigated. The PS/MWCNT composites were prepared by solution mixing from dispersions of various MWCNTs in PS/tetrahydrofuran (THF) solution. Three types of MWCNTs were used; pristine MWCNT, hydroxyl functionalized MWCNT, which was functionalized with $KMnO_4$ in the presence of a phase transfer catalyst at room temperature, and pristine MWCNT with BYK-9077 as a dispersant. It was found that the stable dispersion state of MWCNT in PS/THF solutions significantly improved the thermal and electrical conductivity of the ultimate composites. It is noted that the thermal and electrical conductivity of PS/3 wt% pristine MWCNT composite with BYK-9077 were about 9.4 and 30~50% higher than those of PS/3 wt% pristine MWCNT composite, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.12
• /
• pp.3593-3599
• /
• 2010

In an original effort, this lab attempted to employ polystyrene nanoparticles as a template for the synthesis of ordered and highly porous macroporous $SiO_2$ thin films, utilizing their high combustion temperature and narrow size distribution. However, polystyrene nanoparticle thin films were not obtained due to the low interaction between individual particles and between the particle and silicon substrate. However, polystyrene-polyacrylic acid (PS-AA) colloidal particles of a core-shell structure were synthesized by a one-pot miniemulsion polymerization approach, with hydrophilic polyacrylic acid tails on the particle surface that improved interaction between individual particles and between the particle and silicon substrate. The PS-AA thin films were spin-coated in the thickness ranges from monolayer to approximately $1.0\;{\mu}m$. Using the PS-AA thin films as sacrificial templates, macroporous $SiO_2$ thin films were successfully synthesized by vapor deposition or conventional solution sol-gel infiltration methods. Inspection with field emission scanning electron microscopy (FE-SEM) showed that the macroporous $SiO_2$ thin films consist of interconnected air balls (~100 nm). Typical macroporous $SiO_2$ thin films showed ultralow refractive indices ranging from 1.098 to 1.138 at 633 nm, according to the infiltration conditions, which were confirmed by spectroscopy ellipsometry (SE) measurements. This research shows how the synthetic control of the macromolecule such as hydrophilic polystyrene nanopaticles and silicate sol precursors innovates the optical properties and processabilities for actual applications.

• Journal of the Korean Applied Science and Technology
• /
• v.26 no.3
• /
• pp.306-316
• /
• 2009

In this study, block copolymer of polystyrene and polyethylene glycol methyl ether methacrylate(PEGMA) by ATRP(atom transfer radical polymerization) method was synthesized. 4 arm-molecule which contained halogen atom was synthesized for an initiator. With 4 arm-molecule monodispered polystyrene were synthesized by ATRP method. The molecular change of synthesized monodispersed polystyrene with respect to time was investigated and living polymer characteristic was confirmed. Block copolymer of polystyrene and polyethylene glycol methyl ether methacrylate(PEGMA) was synthesized by ATRP with macroinitiator which was synthesized from the monodispersed polystyrene(Mn=12000). The molecular weight of obtained PS-b-PEGMA was 22,000.

• Korea-Australia Rheology Journal
• /
• v.17 no.2
• /
• pp.41-45
• /
• 2005

As an effort to explore the effective use of carbon nanotubes as a reinforcing material for advanced nano-composites with polymer matrices, multi-walled carbon nanotubes (MWNTs) were successfully incorporated into polystyrene (PS) via in-situ bulk polymerization. Various experimental techniques revealed that the covalent bonds formed between PS radicals and acid-treated carbon nanotubes are favorable resulting in an effective load transfer. The enhanced storage modulus of the nanocomposites suggests a strong possibility for the potential use in industrial applications.

• Applied Chemistry for Engineering
• /
• v.7 no.2
• /
• pp.350-355
• /
• 1996

Poly(AA-co-EGDMA) microgels were prepared by precipitation polymerization in highly swollen polystyrene gel solution. The polymerization was carried out in selective solvent such as cyclohexane/acetone at $60^{\circ}C$. Poly(AA-co-EGDMA) microgels with various site of $0.18{\sim}0.55{\mu}m$ were obtained from different concentration of polystyrene(PS), concentration of crosslinking agent(EGDMA), ratio of Ps/monomer and volume ratio of solvents. The particle size of poly(AA-co-EGDMA) microgels decreased with increasing the concentration of PS and increased with that of EGDMA.

• Polymer(Korea)
• /
• v.39 no.3
• /
• pp.468-474
• /
• 2015

Electrically conductive polymer nanocomposites were prepared by the inclusion of graphene-based nanofillers. Graphene oxide (GO) and reduced graphene oxide wrapped by poly(styrene sulfonate) (PSS-RGO) were used as nanofillers to make good dispersion with the aqueous dispersion of polystyrene (PS) particles. GO sheets were synthesized by the modified Hummers' method from graphite, and PSS-RGO sheets were prepared by the reduction of GO-dispersed PSS solution with hydrazine monohydrate. Morphology and properties of PS/GO and PS/PSS-RGO nanocomposites via latex technology were investigated. Both nanofillers showed well dispersed morphology in PS matrix. Rheological and electrical percolation thresholds were 0.28 and 0.51 wt% for GO, and 0.50 and 1.01 wt% for PSS-RGO respectively. It is speculated that PS/GO nanocomposites showed better conductivity than PS/PSS-RGO counterparts due to the partial recovery of GO by thermal reduction during molding.