• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제33회 춘계학술대회 개최
• /
• pp.149-155
• /
• 2001

New semi-fluorinated polyol esters were synthesized by condensation reaction of polyols (NPG and TMP) and carboxylic acids such as 2-ethylhexanoic acid, stearic acid and perfluorooctanoic acid. The structures of polyol esters were confirmed by FT-IR and H-NMR etc. And, the fluorinated polyol esters were insoluble in several oils, however, the semi-fluorinated polyol esters were soluble in several oils depended on the structure of polyol esters. The physical properties such as 4-ball wear property and extreme-pressure (EP) properties were characterized by measuring wear scar diameter through ASTM D2266 and by determining the load-carrying through ASTM D2783 method, respectively. As the results, wear scar diameters of oils in which the semi-fluorinated polyol esters were added were not changed compared to those of not added oils. While extreme-pressure properties remarkably Increased with fluorine contents of the esters depended on the structure of acid moiety and polyol moiety. Also, the extreme-pressure property of semi-fluorinated NPG polyol ester in gasoline engine oil was better than that of commercial Teflon coating additive.

• Elastomers and Composites
• /
• 제48권4호
• /
• pp.276-281
• /
• 2013

acrylic polyol로 개질한 polyester형 polyurethane foam을 quasi prepolymer법으로 제조하였다. 열적 및 동적 기계적 성질은 thermal gravimetric analysis 및 dynamic mechanical analysis에 의하여 분석하였다. 또한 유리전이온도는 differential scanning calorimeter로 측정하였다. Acrylic polyol 함량이 증가함에 따라 TGA에 의해 측정한 열적 안정성은 약간 감소하였다. 그리고 acrylic polyol 함량이 증가함에 따라 저장 탄성률은 증가한 반면에 tan delta 값은 감소하였다.

• Elastomers and Composites
• /
• 제48권3호
• /
• pp.241-248
• /
• 2013

polyester형 polyurethane foam은 낮은 내가수분해성을 가지므로 quasi prepolymer법에 의한 acrylic polyol을 사용함으로써 극복될 수 있다. acrylic polyol을 함유한 polyurethane foam은 acrylic polyol 함량이 증가함에 따라 인장강도와 경도가 증가하였다. 하지만 split 인열강도와 인열강도는 약간씩 변화되었다. polyurethane foam의 내가수분해성은 인장강도의 손실 백분율로 측정하였으며 acrylic polyol 함량이 25.5g에서 102g으로 증가함에 따라 향상되었다.

• 한국분말재료학회지
• /
• 제22권1호
• /
• pp.39-45
• /
• 2015

In this study, cobalt nanopowder is fabricated by sonochemical polyol synthesis and magnetic separation method. First, sonochemical polyol synthesis is carried out at $220^{\circ}C$ for up to 120 minutes in diethylene glycol ($C_4H_{10}O_3$). As a result, when sonochemical polyol synthesis is performed for 50 minutes, most of the cobalt precursor ($Co(OH)_2$) is reduced to spherical cobalt nanopowder of approximately 100 nm. In particular, aggregation and growth of cobalt particles are effectively suppressed as compared to common polyol synthesis. Furthermore, in order to obtain finer cobalt nanopowder, magnetic separation method using magnetic property of cobalt is introduced at an early reduction stage of sonochemical polyol synthesis when cobalt and cobalt precursor coexist. Finally, spherical cobalt nanopowder having an average particle size of 22 nm is successfully separated.

• 한국염색가공학회지
• /
• 제30권4호
• /
• pp.321-328
• /
• 2018

Wet polyurethane resin was synthesized by using polytrimethylene ether glycol prepared from 1,3-propanediol produced by fermentation from corn sugar as bio polyol and polyether-polyol(PTMG). Physical properties and cell characteristics by wet coagulation were investigated using the synthesized wet polyurethane resin. The tensile strength of wet polyurethane resin decreased with increasing content of bio polyol as copolymer polyol, but it tended to increase elongation at break and tear strength. As a result of thermal characteristic analysis, it was found that the glass transition temperature was slightly increased as the content of bio polyol increased. As a result of comparing the cell characteristics by the wet coagulation method, it was found that the shape of the cell was good when the ether polyol and the bio polyol were used alone.

• Bulletin of the Korean Chemical Society
• /
• 제34권10호
• /
• pp.2865-2870
• /
• 2013

Ni-Ag core-shell nanoparticles were synthesized by polyol process and microemulsion technique successfully. In the polyol process, a chemical reduction method for preparing highly dispersed pure nickel and Ag shell formation have been reported. The approach involved the control of reaction temperature and reaction time in presence of organic solvent (ethylene glycol) as a reducing agent for Ag cation with poly(vinyl-pyrrolidone) (PVP. Mw = 40000) as a capping agent. In microemulsion method, the emulsion was prepared by water/cetyltrimetylammonium bromide (CTAB)/cyclohexane. The size of microemulsion droplet was determined by the molar ratio of water to surfactant (${\omega}_o$). The core-shell formation along with the change in structural phase and stability against oxidation at high temperature heat treatments of nanoparticles were investigated by X-ray diffraction and TEM analysis. Under optimum conditions the polyol process gives the Ni-Ag core-shell structures with 13 nm Ni core covered with 3 nm Ag shell, while the microemulsion method gives Ni core diameter of 8 nm with Ag shell of thickness 6 nm. The synthesized Ni-Ag core-shell nanoparticles were stable against oxidation up to $300^{\circ}C$.

• 한국결정성장학회지
• /
• 제12권2호
• /
• pp.73-79
• /
• 2002

코발트, 니켈, 구리 그리고 귀금속분말에 적용할 수 있는 polyol법은 균질한 크기와 형상을 갖는 금속분말합성에 매우 효과적인 공정이다 이 때 polyol은 용매, 환원제 그리고 보호제의 역학을 한다 $AgNO_3$글 촉매제로 첨가하여 비균질계 핵생성 반응을 야기할 경우 서브마이크폰 크기(0.5$\mu$m)의 코발트 분말을 한성학 수 있었다. 또한 촉매제인 Ag 핵의 수출 변화시키므로써 코발트 분말의 입도를 제어할 수 있음을 확인하였다.

• 에너지공학
• /
• 제23권3호
• /
• pp.157-162
• /
• 2014

해당 연구에서는 수정된 폴리올법을 이용하여 합성한 카본블랙 탄소지지체의 Pt촉매의 전기적, 전기화학적 특성을 평가하였다. 또한 Polyol_Pt/C 촉매는 고분자전해질연료전지의 공기극에 적용하여 산소환원반응성을 측정하였다. 산소환원반응성과 고분자전해질연료전지 성능평가를 통해 상용 Pt/C (JM_Pt/C)촉매와 비교하여 전기화학적인 촉매성능을 비교하였다. 촉매의 활성표면적을 구하기 위해 순환전압전류주사법을 이용하였고, 산소환원반응성을 측정하기 위해 회전원판전극으로 선형주사전류법을 이용하였다. 또한 고분자전해질연료전지 완전지 성능 측정을 진행하였다. 그 결과 Polyol_Pt/C 촉매의 활성표면적 ($196m^2g^{-1}$)은 JM_Pt/C 촉매의 그 값 ($183m^2g^{-1}$) 보다 우수하였다. 촉매들의 산소환원반응성에 경우에도 Polyol_Pt/C 촉매는 JM_Pt/C 촉매보다 우수한 반파장전위 및 한계전류밀도를 나타내었다. 또한 완전지 평가시, MEA 공기극을 위한 Polyol_Pt/C 촉매 담지량을 기존의 0.4에서 0.15로 줄였을 때, 성능저하가 적게 나타났고, 300시간의 장기간 성능 평가에서도 연료전지 성능이 거의 일정하게 유지되었다. 이를 토대로 수정된 폴리올법에 의해 합성된 Polyol_Pt/C 촉매는 경제적인 이용 및 우수한 내구성을 가지고 있음을 밝혀내었다.

• 대한화장품학회:학술대회논문집
• /
• 대한화장품학회 2003년도 IFSCC Conference Proceeding Book II
• /
• pp.313-318
• /
• 2003

Vitamin C's function and mechanism are comparatively well known among the several kinds of vitamins. Inhibition of free radical. promotion of collagen synthesis, restraint of melanin formation and resolution of melanin are its main functions. But Vitamin C is very easy to oxidize by heat, moisture or air so it causes stability problem to make formulation. To solve these problems unique formulating method or derivatives using method could be effective. Object: First, stabilize 10% of Ascorbic acid as polyol/silicone emulsion and try to make polyol/silicone/polyol anhydrous multiple emulsion secondly. And then, encapsulate with porous power to enhance the stability of Ascorbic Acid from formulating method.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.560-563
• /
• 2008

A modified polyol process is developed to enhance Pt loading during the preparation of Pt/C catalysts. With the help of the zeta potential, the effect of pH on the electrostatic forces between the support and the Pt colloid is investigated. It is shown experimentally that the surface charge on the carbon support becomes more electropositive when the solution pH is changed from alkaline to acidic. However, this change does not affect the electronegative surface charge of Pt colloids already attained and stabilized by glycolate anions. This new behavior caused by the change in the solution pH accounts for the enhanced yield of the process and does not affect the Pt particle size. All our experimental results reveal that this simple modification is a cost effective method for the synthesis of highly Pt loaded Pt/C catalysts for fuel cells.