• 제목/요약/키워드: polymerization reaction

검색결과 612건 처리시간 0.023초

Multiplex RT-PCR에 의한 돼지 바이러스 설사증의 감별 진단 (Differential Diagnosis of Porcine Viral Diarrhea by Multiplex RT-PCR)

  • 황보원;김도경;김은경;김용환;여상건
    • 한국임상수의학회지
    • /
    • 제23권3호
    • /
    • pp.300-307
    • /
    • 2006
  • In the present study, methods of the reverse transcription-polymerase chain reaction(RT-PCR) were evaluated for the rapid detection and differentiation of transmissible gastroenteritis virus(TGEV), porcine epidemic diarrhea virus(PEDV) and rotavirus in piglets suffering from diarrhea. For the purposes, the PCR conditions were first confirmed for the amplification of VP7 gene of rotavirus and N gene of TGEV and PEDV using each specific primers and their annealing temperature. Multiplex RT-PCR methods were further determined to distinguish these viral infections and the results are as follows. For the specific amplification of these viral genes, the reliable PCR condition was determined as 30 cycles of reaction consisting each 1 min of denature at $94^{\circ}C$, annealing at $42^{\circ}C$ and polymerization at $72^{\circ}C$ with 1.0 mM $MgCl_2$. It was able to differentiate these viral infections in the intestines and feces of piglets suffering from diarrhea by duplex PCR for TGEV and PEDV and single PCR for rotavirus with a primer-annealing temperature of $42^{\circ}C$. When the multiplex RT-PCR were undertaken for the field samples, 17 cases of PEDV and 5 cases of rotavirus infections were differential diagnosed in a total of 92 samples of intestines and feces of the piglets with diarrhea.

키토산 올리고사카라이드 및 그 유도체의 제조와 특성에 관한 연구 (Studies on the Preparation and the Properties of Chitosan Oligosaccharide and its Derivatives)

  • 하병조;김준오;이옥섭
    • 대한화장품학회지
    • /
    • 제23권2호
    • /
    • pp.48-62
    • /
    • 1997
  • 천연 고분자인 키토산의 1차 아민기를 아질산나트륨염에 의해 환원 말단에 알데히드기를 갖는 키토산 올리고사카라이드를 얻었으며, 이를 수소화붕소산나트륨으로 환원하여 수산기로 전환하였다. 얻어진 키토산 올리고사카라이드의 평균 중합도는 겔투과 크로마토그라피를 통해 약 2로 나타났으며, 키토산에 비해 친수성 용매에 대한 용해성이 매우 높게 나타났다. 보습효과를 글리세린과 비교 측정한 결과 키토산 올리고사카라이드는 어느 정도 수분을 보유할 수 있는 능력은 있으나 글리세린에 비하여 약한 것으로 나타났다. 피부의 섬유아세포 증식 실험결과1$\times$10-3 ~ 1$\times$10-4%농도에서 115 ~ 125%의 세포증식 효과를 보였다. 키토산 올리고사카라이드에 아실클로라이드를 반응시켜 얻은 N, N-디아실, O-아실 키토산 올리고사카라이드는 액정을 형성하였으며, 높은 결정성을 보였다. 또한 유동파라핀, 에스테르형 오일 성분 등에 대한 용해성이 우수하여 화장품용 유성성분으로서의 가능성을 나타내었다.

  • PDF

N,N-디아실, O-아실 키토산 올리고머의 물리화학적 특성에 관한 연구 (Study of Physico-Chemical Properties of N,N-Diacyl, O-Acyl Chitosan Oligomer)

  • 이옥섭;하병조;김준오;박성규;이윤식
    • 공업화학
    • /
    • 제8권3호
    • /
    • pp.365-373
    • /
    • 1997
  • 천연 고분자인 키토산의 1차 아민기를 아질산 나트륨에 의해 oxidative-deamination 반응을 일으켜 reducing end에 알데히드기를 갖는 키토산 올리고머를 얻었으며, 이를 수소화붕소산나트륨으로 환원하여 2,5-anhydro-D-mannitol로 전환하였다. 얻어진 피토산 올리고머의 평균 중합도는 겔 투과 크로마토그래피를 통해 2정도임을 알 수 있었고, 키토산에 비해 친유성 유기 용매에 대한 높은 용해성을 나타내었다. 키토산 올리고머에 아실클로라이드를 4-디메틸아미노피리딘 촉매하에서 반응시켜 N,N-디아실, O-아실 키토산 올리고머를 합성하였다. 시차주사열량 분석을 실시한 결과 N,N-디라우로일, O-라우로일 키토산 올리고머의 경우 액정 영역을 나타내었고, 편광현미경을 통해 이를 확인할 수 있었다. X-선 회절분석 실험결과 키토산 올리고머와 달리 N,N-디라우로일, O-라우로일 키토산 올리고머는 높은 결정성 구조를 나타냄을 알 수 있었다.

  • PDF

실리콘 하이드라이드 및 에폭시 관능기를 양 말단에 포함하는 테트라메틸디실록산 치환체의 합성에 관한 연구 (Study on the Synthsis of Tetramethyldisiloxane Derivatives Containing Silicone Hydride and Epoxy Functionalities at Each End)

  • 정대원;강민하
    • 공업화학
    • /
    • 제18권2호
    • /
    • pp.116-120
    • /
    • 2007
  • 양이온 개환중합형 광고분자 시스템용 단량체의 합성에 핵심적인 중간체로 사용되는 1-[2-(3-{7-oxabicyclo[4.1.0] heptyl}1,1,3,3-tetramethyldisiloxane (Mono)의 합성방법의 최적화에 관하여 연구하였다. Speier 촉매의 존재 하에서, 4-vinyl-1-cyclohexene 1,2-epoxide (VCHO)를 과량의 1,1,3,3- tetramethyldisiloxane (TMDS)과 수소규소화 반응시켜 TMDS의 한쪽 실리콘 하이드라이드를 미반응 상태로 유지하고 나머지 한쪽만이 VCHO와 반응한 형태의 Mono를 합성할 수 있었으며, 생성된 Mono의 구조 및 순도는 FT-IR, $^1H-NMR$$^{29}Si-NMR$을 통하여 확인할 수 있었다. VCHO와 TMDS의 몰비를 1 : 4로 고정하고 촉매 함량 및 반응 온도를 변화시킨 결과, Speier 촉매 함량 5 ppm, 반응온도 $55^{\circ}C$가 Mono의 선택적 합성에 가장 최적인 반응조건으로 판단되었다.

두개골 성형술에서 석고와 신속조형모델을 이용한 간단한 Methylmethacrylate 삽입물 제작법 (Easy Molding Technique of Methylmethacrylate Implant Using Plaster and Rapid Prototyping Model in Cranioplasty)

  • 박기린;김용하;김태곤;이준호;하주호
    • 대한두개안면성형외과학회지
    • /
    • 제13권2호
    • /
    • pp.125-129
    • /
    • 2012
  • Purpose: Methylmethacrylate is the most commonly used alloplastic material in cranioplasty. However during the polymerization of methylmethacrylate, a significant exothermic reaction takes place. This reaction may result in thermal injury to the brain tissue and other soft tissues. Also it is difficult to make three-dimensional methylmethacrylate implant that is perfectly matched to the defect during the operation time. We report on the molding technique of methylmethacrylate implant using plaster mold and the rapid prototyping model in cranioplasty. Methods: A 44-year-old male was referred to the department for severe frontal hollowness. He was involved in an automobile accident resulting in large frontal bone defect with irregular margin. The preformed patient-specific methylmethacrylate implant was made using plaster mold and the rapid prototyping model before the operative day. The methylmethacrylate implant was placed in the frontal defect and rigidly fixed with miniplates and screws on the operative day. Results: The operation was performed in an hour. In the 6 months follow-up period, there were no complications. Patient was satisfied with the results of cranioplasty. Conclusion: Safe cranioplasty was performed with the preformed patient-specific methylmethacrylate implant using plaster mold and the rapid prototyping model. The result of this method was satisfactory, aesthetically and functionally.

유로키나제 분리를 위한 아민화 HPP-g-GMA 중공사 이온교환체의 합성에 관한 연구 (Synthesis of Aminated Hollow PP-g-GMA Fibrous Ion-Exchanger for Separation of Urokinase)

  • 황택성;이진혁
    • 폴리머
    • /
    • 제26권2호
    • /
    • pp.160-167
    • /
    • 2002
  • E-beam 전조사법을 이용하여 HPP-g-GMA 공중합체와 아민화 반응을 통한 아민화 HPP-g-GMA 이온교환체를 합성하였다. 그라프트율은 GMA 단량체 농도가 증가함에 따라 증가하였으며 GMA 단량체 농도가 1.46 M에서 그라프트율이 130%로 최대를 나타냈다. 아민화율은 그라프트율이 증가함에 따라 증가하는 경향을 나타내었으며, 그라프트율이 100%일 때 37.4%로 최대값을 나타내었다. 아민화 HPP-g-GMA 섬유이온교환체의 이온교환용량은 약 3.78 meq/g으로써 흡착 성능이 매우 우수한 소재임을 확인하였다. BET 분석결과 아민화 HPP-g-GMA의 비표면적은 54.83 $\m^2/g$, 기공크기는 $26\AA$으로 반응전보다 비표면적은 감소하였고 기공크기는 약간 증가하는 경향을 보였다. 또한 SEM 분석 결과, 반응 후 섬유의 두께가 굵어짐을 관찰하였으며 기공 막힘현상이 관찰되지 않았으며 이로부터 본 연구에서 합성한 섬유이온교환체가 음이온 흡착.분리에 적합함을 확인하였다.

Enzymatic Preparation of Maltooctaose-rich Mixture from Starch Using a Debranching Enzyme of Nostoc punctiforme

  • Choi, Ji-Hye;Kim, Myo-Jeong;Kim, Young-Wan;Lee, Hee-Seob;Park, Jong-Tae;Lee, Byong-Hoon;Park, Kwan-Hwa
    • Food Science and Biotechnology
    • /
    • 제18권2호
    • /
    • pp.570-573
    • /
    • 2009
  • The debranching enzyme of Nostoc punctiforme (NPDE) is a novel enzyme that catalyzes the hydrolysis of $\alpha$-1,6-glycosidic linkages in starch, followed by the sequential hydrolysis of $\alpha$-1,4-glycosidic linkages. The debranching activity of NPDE is highly specific for branched chains with a degree of polymerization (DP)>8. Moreover, the rate of hydrolysis of $\alpha$-1,4-linkages by NPDE is greatly enhanced for maltooligosaccharides (MOs) with a DP>8. An analysis of reaction mixtures containing various starches revealed the accumulation of maltooctaose (G8) with glucose and maltose. Based on the novel enzymatic properties of NPDE, an MO mixture containing more than 60% G8 with yield of 18 g G8 for 100 g starch was prepared by the reaction of NPDE with soluble starch, followed by ethanol precipitation and gel permeation chromatography (GPC). The yield of the G8-rich mixture was significantly improved by the addition of isoamylase. In summary, a 4-step process for the production of a G8-rich mixture was developed involving the enzymatic hydrolysis of starch by NPDE.

키토산 올리고당의 제조용 소재로서 Bacillus sp. P2l 기원의 키토산분해효소 (Endochitosanase Produced by Bacillus sp. P2l as a Potential Source for the Production of Chitooligosaccharides.)

  • 박노동;조유영;이현철;조종수;조도현
    • 한국미생물·생명공학회지
    • /
    • 제26권4호
    • /
    • pp.345-351
    • /
    • 1998
  • 다양한 중합도의 키토산올리고당의 생산에 적합한 효소원을 개발하기 위해서 23종의 시판효소와 토양에서 분리한 8종의 Bacillus sp.와 1종의 Aspergillus sp.가 생산하는 조효소에서 키토산 분해효소의 활성을 검색하였다. 각 효소의 키토산에 대한 가수분해활성은 탁도의 변화, 반응 후에 생성되는 침전물의 양, 총환원당 생성능력, 점도의 감소 속도 등을 기준하여 평가하였다. 시험한 효소원 가운데서 키토산에 대한 강한 분해활성을 가지는 효소는 P2l이 생산하는 것이었다. 이 균주가 생성하는 chitosanase는, HPLC와 TLC에 의한 분해산물의 분석과, 점도 변화의 측정과 활성염색 등에 근거하여, 주로 내부 가수분해활성을 갖는 것으로 판단되었다. 이 효소는 키토산 올리고당의 생산에 적합한 효소 소재로 가능성이 큰 것으로 평가되었다.

  • PDF

Cu 담지 Ti-SBA-15 촉매의 선택적 CO 산화 반응 (Preferential Oxidation of CO over Cu/Ti-SBA-15 Catalysts)

  • 김준우;박재우;이종수;최한슬;정석진
    • Korean Chemical Engineering Research
    • /
    • 제51권4호
    • /
    • pp.432-437
    • /
    • 2013
  • 고분자 전해질 연료전지 구동 시 양극 활성 물질에 대한 CO 피독을 방지하기 위해 Cu를 촉매 활성 종으로 사용하고 반응물의 확산이 용이한 몇 가지 메조 세공 물질을 지지체로 이용하여 CO 선택적 산화 반응(PROX반응)을 실시하였다. 그 결과 거대 세공을 가진 SBA-15를 지지체로 사용했을 때 우수한 CO 산화 활성을 보였으며 특히 Cu 담지 량에 비례하여 활성은 증가하였다. 또한 Cu의 분산도를 높이고자 첨가한 Ti 성분은 저온에서 CO 산화 성능을 높이는데 기여하였다. 특히 Ti 성분을 20 wt-% 첨가한 Cu/Ti20-SBA-15 촉매에서 Cu의 분산도가 가장 우수하였으며 CO 산화활성 역시 개선됨을 확인하였다.

Alkenylsilane의 제조와 고분자화반응 (Preparation and Polymerization of Alkenylsilanes)

  • 김정균;최순규;박은미;정인경
    • 대한화학회지
    • /
    • 제41권2호
    • /
    • pp.88-97
    • /
    • 1997
  • 실릴트리플레이트$(Ph_{3-n}SiH(OTf)_n))$는 낮은 온도에서 트리펜일실란과 트리플산$(CF_3SO_3H)$의 반응에 의해 형성되며 이러한 화합물은 새로운 기능성 실란 유도체의 제조에 이용되고 있다. 실릴트리플레이트와 알캔일-, 알킨일마그네슘 브롬아이드 그리고 유기리티움 화합물과의 반응에 의해 새로운 실란 화합물 Ph_2SiHR(R=C{\equiv}(CPh,\;CH=CH_2,\;CH_2CH=CH_2,\;(CH_2)_2CH=CH_2,\;(CH_2)_3CH=CH_2)$을 높은 수율로 얻었다. 합성된 알켄일-, 알킨일실란은 백금촉매 하에서 카보실란 고분자$((Ph_2Si(CH_2)m)n;\;m=2∼4,\;n\le10)$5~6환고리 화합물을 형성하였다. 모든 생성물들은 NMR, UV, IR, 질량분석, 그리고 원소분석법에 의해 확인되었다.

  • PDF