• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 디스플레이 광소자 분야
• /
• pp.45-48
• /
• 2002

Poly(3-hexylthiophene) or P3HT based organic thin film transistor (OTFT) array was fabricated on flexible poly carbonate substrates and the electrical characteristics were investigated. As the gate dielectric, a dual layer structure of polyimide-$SiO_2$ was used to improve the roughness of $SiO_2$ surface and further enhancing the device performance and also source-drain electrodes were $O_2$ plasma treated for improvement of the electrical properties, such as drain current and field effect mobility. For the active layer, polymer semiconductor, P3HT layer was printed by contact-printing and spin-coating method. The electrical properties of OTFT devices printed by both methods were evaluated for the comparison. Based on the experiments, P3HT-based OTFT array with field effect mobility of 0.02~0.025 $cm^{2}/V{\cdot}s$ and current modulation (or $I_{on}/I_{off}$ ratio) of $10^{3}\sim10^{4}$ was fabricated.

• 한국산학기술학회논문지
• /
• 제17권12호
• /
• pp.482-487
• /
• 2016

파장 400 nm 이하의 자외선은 눈 건강에 매우 해롭다. 특히 UVA (315 nm ~ 400 nm)는 백내장, 설안염, 초자체경화 등을 유발할 수 있고, UVB (280 nm ~ 315 nm)는 결막염, 각막염 및 설안염 등을 일으킬 수 있다. 따라서 폴리머 안경렌즈를 사용함에 있어서 자외선의 차단 기능과 가시광선 영역에서 투과되는 빛을 증가시키고, 안경렌즈 표면에서 형성되는 허상을 방지하는 반사방지 기능은 매우 중요하다. 본 연구에서는 m-자일릴렌 디이소시아네이트 모노머와 2,3-Bis-1-propanethiol 모노머 및 벤조트리아졸 UV 흡수제 (SEESORB 709), 안료 혼합물, 이염화 이부틸 주석 촉매제, 알킬인산 에스터 이형제 등의 혼합물을 인젝션 몰드 방법으로 열중합 공정을 적용하여, 굴절률 1.67의 고굴절률 폴리머 안경렌즈를 제조하였다. 폴리머 안경렌즈 표면에서의 반사를 줄이기 위하여 렌즈 양면에 다층박막 반사방지 코팅을 E-beam 증착 시스템으로 코팅하였다. 자외선 차단 폴리머 안경렌즈의 광학적 특성을 UV-visible spectrometer로 분석하였고, 반사방지층을 구성하는 박막의 굴절률, 표면거칠기 등과 같은 박막소재 특성을 각각 Ellipsometry 및 원자힘 현미경으로 분석하였다. 분석 결과 제조된 안경렌즈는 395 nm 파장 이하의 자외선을 99% 이상 완벽하게 차단하였다.

• 공업화학
• /
• 제21권2호
• /
• pp.200-204
• /
• 2010

고체 표면의 성질은 물질의 사용을 결정하는데 있어서 중요하다. 그래서 고분자 박막을 사용하여 표면을 개질시켜 표면층의 물리적, 화학적 성질을 제어하는 방법이 떠오르고 있다. 본 연구에서는 기판 표면과 고분자 간의 화학적 derivatization 없이 광화학 반응을 통하여 간단하고 효과적인 방법으로 고체 표면위에 고분자 박막을 흡착하여 표면을 개질시키는 방법을 설명하였다. 실리콘 웨이퍼에 스핀 코팅으로 형성된 광반응성이 있는 P4VP 박막을 이용하여 다른 고분자를 얹혀 UV 노광을 조사하여 벤질 라디칼 moieties 반응으로 고정하였다. 광화학 반응의 결과, UV 가교가 일어난 고분자는 P4VP 박막에 고정되어 지고, 반응이 일어나지 않은 부분은 초음파 세척으로 제거할 수 있다. 고정된 박막의 두께는 UV 노광 시간과 고분자의 분자량에 상관하여 형성되며, 광화학 반응으로 고정되기 때문에 photolithography 공정으로 마이크론 패턴 형성이 가능하다.

• 한국수소및신에너지학회논문집
• /
• 제31권3호
• /
• pp.276-283
• /
• 2020

Alcohol-based solvents including ethanol (EtOH) and tert-butyl alcohol (TBA) are investigated instead of isopropanol (IPA), which is a common solvent for polytetrafluoroethylene (PTFE), as an alternative solvent for preparing the catalyst slurry with PTFE binder. As a result, the performance at 0.2 A/㎠ from the single cells from using catalyst slurries based on EtOH and TBA showed very similar value to that from the slurry using IPA, which implies the EtOH and TBA can be used as a solvent for the catalyst slurry. It is also confirmed by the very close values of the total resistance of the membrane electrode assemblies from the slurries using different solvents. In the energy dispersive spectrometry (EDS) image, the shape of crack and dispersion of PTFE are changed according to the vapor pressure of the solvent.

• 대한조선학회논문집
• /
• 제54권1호
• /
• pp.71-81
• /
• 2017

In this study, a series of full-scale extrapolation procedures based on the Granville's similarity scaling method, which was employed by Schultz (2007), is modified and then applied to compare the resistance performance between two different anti-fouling coatings. As an analysis example, the low frictional AF coating based on a novel skin-friction reducing polymer named FDR-SPC (Frictional Drag Reduction Self-Polishing Copolymer), which had been invented by the present author, is employed. The low frictional coating, which gives 25.4% skin frictional reduction in lab test, is estimated to give 18.2% total resistance reduction for a 176k DWT bulk carrier.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(2)
• /
• pp.489-492
• /
• 2004

In this paper, we demonstrate polymer thin-film transistors (TFTs) on a paper-based flexible substrate. As a substrate, commercially available photo-paper is used with Parylene coating. The parylene layer enables conventionally used wet chemical process and vacuum deposition processes for electrodes and gate insulator. As an active channel layer, we used poly-3-hexylthiophene (P3HT) which is solution process. Field effect mobility up to $(0.06 {\pm} 0.02) cm^2/Vs$ and on/off ratio of $10^3 {\~}10^4$ are achieved on a photo-paper.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.124-127
• /
• 2004

This study is to investigate the bond characteristics of glass fiber reinforced polymer(GFRP) reinforcing bars in concrete by pullout test experimentally. Three different types of GFRP bars with different surface deformations were considered in this study. Also, standard deformed steel reinforcing bar with or without epoxy-coating were included for the comparisons of bond strength. All test procedures including specimens preparation, test apparatus and measuring devices were made according to the recommendation of CSA(Canadian Standards Association) Standard S806-02. From the test results, it was found that small surface indentations contributed to increase the bond strength of GFRP bar significantly. Based on the limited test results till now, the bond strength of GFRP bar with sand-coated deformation commercially available in foreign market is around $80\%$ of that of steel deformed bars.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.282-282
• /
• 2006

Nanoporous organosilicate thin films were realized by the microphase separation of pore generating components mixed with an organosilicate matrix. The refractive index of such nanoporous organosilicate films can be tuned in the range of $1.40{\sim}1.22$. With a nanoporous single layer with n ${\sim}1.225,\;99.85\;%$ transmittance in the visible range was achieved. In order to overcome the limitation on the narrow wavelength for high transmittance imposed by single nanoporous thin films, bilayer thin films with different reflectance for each layer were prepared by inserting high refractive index layer with a refractive index of 1.447. It is demonstrated that the novel broadband antireflection coating with improved transmittance can be easily achieved by the nanoporous bilayer thin films described in present study.

• Bulletin of the Korean Chemical Society
• /
• 제32권2호
• /
• pp.605-608
• /
• 2011

Hybrid composite membranes were prepared by coating poly(ethylene oxide) and $SiO_2$ particles onto the porous polypropylene nonwoven matrix. Gel polymer electrolytes prepared by soaking the hybrid composite membranes in an organic electrolyte solution exhibited ionic conductivities higher than $1.1{\times}10^{-3}Scm^{-1}$ at room temperature. Dyesensitized solar cell (DSSC) employing the hybrid composite membrane with PEO and 10 wt % $SiO_2$ exhibited an open circuit voltage of 0.77 V and a short circuit current of 10.78 $mAcm^{-2}$ at an incident light intensity of 100 $mWcm^{-2}$, yielding a conversion efficiency of 5.2%. DSSC employing the hybrid composite membrane showed more stable photovoltaic performance than that of the DSSC assembled with liquid electrolyte.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.103-104
• /
• 2007

Nanometer-scaled polymer beads, such as polystyrene beads, were used as nanometer fabrication materials due to their some advantages such as self-assembled monolayer, nanometer scaled size and excellent compatibility with silicon based devices. Thus, the investigation on these properties of polymer beads was required. It is difficult to control the array of polystyrene beads on silicon substrate. In this study, we investigated the condition of selective array of polystyrene beads on nanometer-scaled hydrophilic surface which was obtained by APS coating. A tilting method was used to array the polystyrene beads selectively on the substrate. The polystyrene beads could be arrayed selectively by this method. From these results, we verified that there are possibilities to fabricate unique tools for the nanometer-scaled electrical devices.