• 제목/요약/키워드: polymer modifier

검색결과 65건 처리시간 0.027초

도공액의 보수성에 관한 연구(제5보)-알칼리 반응형 보수.유동성 개량제의 적용- (A study on the Water Retention of Coating Colors(V)-Application of Alkali Sensitive Water Retention and Rheology Modifiers-)

  • 이용규;엄기용
    • 펄프종이기술
    • /
    • 제29권4호
    • /
    • pp.28-35
    • /
    • 1997
  • Sole-binder formulation has been recently introduced to solve the problems of coating process and printability caused by use of natural polymer However, the decrease of natural polymer application causes another problem in paper coating. Therefore, synthetic thickener is used to get similar effect to natural polymer usage. In this study. low shear viscosity, dewatering of coating colors were measured to evaluate the performance of the alkali sensitive water retention and rheology modifiers. The effects of alkali sensitive thickener on the physical properties of coated paper and printability were also investigated. The gloss and printability of coated paper containing the synthetic flow modifier were similar or superior to those of CMC containing coated paper. This modifier was also effective to improve the problems caused by the use of starch. The results indicated that the flow modifier synthesized with alkali sensitive thickener can reduce the problems of natural polymer and could be a good substitute f3r a natural polymer.

  • PDF

Performance Improvement of Polymer Light Emitting Diodes by Insertion of a Silane Layer

  • Lee, Jun-Yeob
    • Journal of Information Display
    • /
    • 제8권3호
    • /
    • pp.1-4
    • /
    • 2007
  • The influence of a silane layer on the performances of polymer light emitting diode(pLED)s has been studied. Glycidoxypropyltrimethoxysilane(GPS) with an epoxy functional group was used as a surface modifier for ITO substrates. The GPS layer was inserted between an ITO and a poly(3,4)-ethylenedioxythiophene/polystyrenesulfonate(PEDOT) by wet process and the performances of PLEDs were investigated. The introduction of GPS layer increased the brightness and efficiency of PLEDs by 30%. In addition, the lifetime of PLEDs was also improved considerably by using GPS as a surface modifier.

고속열차 점착계수 향상을 위한 신규 복합재료 분말 마찰조절재 개발 및 점착력 특성 평가 (Development of Novel Composite Powder Friction Modifier for Improving Wheel-rail Adhesion in High-speed Train)

  • 오민철;안병민
    • 한국분말재료학회지
    • /
    • 제25권6호
    • /
    • pp.501-506
    • /
    • 2018
  • With the recent remarkable improvements in the average speeds of contemporary trains, a necessity has arisen for the development of new friction modifiers to improve adhesion characteristics at the wheel-rail interface. The friction modifier must be designed to reduce slippage or sliding of the trains' wheels on the rails under conditions of rapid acceleration or braking without excessive rolling contact wear. In this study, a novel composite material consisting of metal, ceramic, and polymer is proposed as a friction modifier to improve adhesion between wheels and rails. A blend of Al-6Cu-0.5Mg metallic powder, $Al_2O_3$ ceramic powder, and Bakelite-based polymer in various weight-fractions is hot-pressed at $150^{\circ}C$ to form a bulk composite material. Variation in the adhesion coefficient is evaluated using a high-speed wheel-rail friction tester, with and without application of the composite friction modifier, under both dry and wet conditions. The effect of varying the weighting fractions of metal and ceramic friction powders is detailed in the paper.

폐FRP 미분말을 사용한 폴리머 시멘트 모르타르의 물성 (Physical Properties of Polymer Modified Mortar Containing FRP Wastes Fine Powder)

  • 황의환;한천구;최재진;이병기
    • 콘크리트학회논문집
    • /
    • 제14권2호
    • /
    • pp.190-198
    • /
    • 2002
  • 본 연구에서는 폐 FRP(fiber reinforced plastics) 미분말을 잔골재 대용으로 치환한 폴리머 시멘트 모르타르의 물성을 조사하였다. 폴리머 혼화제로는 Styrene-Butadiene Rubber(SBR) 라텍스, Polyacrylic Ester(PAE) 에멀젼 및 Ethylene-Vinyl Acetate(EVA) 에멀젼을 사용하였다. 폐FRP 미분말의 치환율을 5~30 wt%, 폴리머 혼화제의 첨가량을 폴리머 시멘트비 5~20 wt%로 변화시켜 공시체를 제작하였다. 굳지 않은 폴리머 시멘트 모르타르의 물성, 경화 공시체의 흡수율, 내열수성 및 양생방법 에 따른 압축 및 휨강도를 측정하였다. 폐FRP 미분말을 치환ㆍ첨가한 폴리머 시멘트 모르타르의 압축 및 휨강도는 폐FRP 미분말의 치환량이 증가할수록 감소되었고, 폴리머 시멘트비가 증가할수록 증가되었다. 폴리머 혼화제로서 SBR 라텍스를 사용한 폴리머 시멘트 모르타르의 강도특성이 가장 우수하였고, 폴리머 시멘트 모르타르의 적정한 폴리머 시멘트비는 20wt%이었고, 폐FRP 미분말의 적정 치환량은 20wt%로 나타났다. 또한 폴리머 시멘트 모르타르는 가열양생에 의해 강도발현이 촉진되었다.

$CARBOPOL^{(R)}$ AQUA SF-1 POLYMER -The Premier Rheology Nodifier for Surfactant Based Cleansing Formulation

  • J. Casner
    • 대한화장품학회:학술대회논문집
    • /
    • 대한화장품학회 2003년도 IFSCC Conference Proceeding Book II
    • /
    • pp.458-459
    • /
    • 2003
  • Turn concept into reality, with a contemporary liquid rheology modifier and open the door to a new level of freedom in surfactant-based formulating, Carbopol$^{(R)}$ Aqua SF-1 polymer is an alkali swellable, lightly crosslinked acrylic polymer, It is supplied as a 30% active polymer in water.(omitted)d)

  • PDF

타이어고무를 이용한 개질에 따른 아스팔트 변형저항성 향상 연구 (Improvement of Deformation Resistancy of Asphalt by Modification with Tire Rubber)

  • 홍영근;고문보
    • Elastomers and Composites
    • /
    • 제43권2호
    • /
    • pp.72-81
    • /
    • 2008
  • 포장도로의 소성변형을 줄여보고자 개질아스팔트가 나타나고 있다. 본 연구에서는 타이어 고무 등을 이용하여 개질된 아스팔트의 물성을 알아 보았다. 마샬안정도와 인장강도가 각각 98% 및 43% 증가하여 타이어 고무의 개질효과를 알 수 있었다. 점도, 침입 및 열 분석에서 아스팔트의 변형저항성이 향상되었음을 알 수 있었다. IR 및 GPC 실험에서 개질제의 구조가 아스팔트의 구조와 유사할 경우 두 화합물 사이에 화학결합이 발생하여 분자들의 크기가 증가함으로써 개질효과가 커짐을 알 수 있었다.

충격보강제의 함유량과 분산이 나일론 6 복합체의 충격강도에 미치는 영향의 컴퓨터 해석 (Computer Simulation of the Effects of Content and Dispersion of Impact Modifier on the Impact Strength of Nylon 6 Composites)

  • 우정우;류민영
    • Elastomers and Composites
    • /
    • 제49권4호
    • /
    • pp.284-292
    • /
    • 2014
  • 고분자 소재는 금속 소재에 비해 기계적 강도, 특히 충격강도가 매우 취약하기 때문에 이의 증대를 위해 충격보강제를 이용하는 경우가 많다. 이러한 충격강도는 충격보강제의 함량과 분포에 따라 변화한다. 본 연구에서는 충격보강제가 함유된 나일론 6 시편에 대해서 충격시험을 모사하였고 충격시편 단면에서의 응력분포를 통해 충격강도 증대원리를 관찰하였다. 시편 단면에서 충격보강제의 개수와 분포에 따른 해석을 하여 비교하였다. 충격보강제의 개수가 증가할수록 부피가 감소하는 모델의 경우 놋치 표면의 응력과 주응력의 크기가 점차 높게 나타났다. 충격보강제의 개수가 증가할수록 충격보강제 전체의 총 표면적이 증가하는 모델의 경우에는 응력과 주응력이 점차 높게 관찰되었다.

실란 기능화 아크릴 고분자 전구체를 이용한 PDMS 표면 개질제 제조 및 표면 물성 (Preparation of PDMS Surface Modifier Using Silane-Functionalized Polymer Precursor Manufacture and Their Properties)

  • 신재현;김나혜;김주영
    • 접착 및 계면
    • /
    • 제19권4호
    • /
    • pp.154-162
    • /
    • 2018
  • 필름 형태의 Polydimethylsiloxane (PDMS)은 표면 개질을 하기 위해 Plasma 처리 또는 Corona 처리를 하여 표면을 -OH기로 활성화시키는 공정이나, 피착제와 PDMS 필름의 접착 또는 Adhesion promoter와 축합 반응을 통해 PDMS 표면을 다른 작용기로 개질시키는 공정, Grafting polymerization을 이용하는 PDMS 개질 공정이 주로 이용된다. 그러나 Plasma나 Corona 처리 후에 친수성이 오래가지 못하고, 보관에 어려움이 있다. 따라서, 본 연구에서는 코팅 공정을 통하여서 PDMS표면 개질을 하기 위해서, 먼저 새로운 형태의 실란 기능화 아크릴 고분자 전구체를 합성하고 이를 Hydroxyl-terminated PDMS와의 축합 반응을 통해 아크릴 고분자와 PDMS 고분자가 결합된 형태의 표면 개질제를 제조한 후, 이를 PDMS 필름 위에 코팅하였다. 제조한 표면 개질제의 구조와 분자량을 확인하기 위하여 1H-NMR과 GPC를 분석하였고, 표면 개질제가 코팅된 PDMS표면 특성 변화를 확인하기 위하여 XPS, ATR, WCA를 이용하여 표면 특성을 조사하였으며, PDMS 필름과의 부착을 확인하기 위해 Cross cutting test를 진행하였다. 그 결과 PDMS 필름 표면이 아크릴 고분자층이 형성된 것으로 확인하였고, PDMS 필름과 표면 개질제와의 부착성 (4 - 5B) 또한 우수한 것을 확인하였다.

급냉 제강슬래그를 재활용한 EVA-폴리머 시멘트 모르타르의 특성 (Characteristics of EVA-Polymer Modified Mortars Recycling Rapid-chilled Steel Slag Fine Aggregate)

  • 황의환;김진만
    • 공업화학
    • /
    • 제19권6호
    • /
    • pp.652-660
    • /
    • 2008
  • 급냉 제강슬래그를 재활용하기 위하여 제강슬래그의 치환율을 다양하게 변화시켜 만든 EVA-폴리머 시멘트 모르타르의 기계적강도와 물성에 대하여 조사하였다. EVA-폴리머 시멘트 모르타르 공시체는 폴리머-시멘트비를 5단계(0, 5, 10, 15, 20 wt%), 급냉 제강슬래그의 치환율을 5단계(0, 25, 50, 75, 100 wt%)로 각각 변화시켜 총 25 종류의 공시체를 제작하였다. 공시체의 제 성능을 조사하기 위하여 후레쉬 모르타르의 물-시멘트비, 단위용적중량, 공기량과 경화 공시체의 압축 및 휨강도, 흡수시험, 내열수성시험, 세공분포측정 및 SEM에 의한 미세조직 관찰 등을 실시하였다. 그 결과 급냉 제강슬래그의 치환율이 증가됨에 따라 물-시멘트비는 감소되었으나 단위용적중량은 현저히 증가 되었다. 폴리머-혼화제 및 급냉 제강슬래그의 첨가량 증가에 따라 흡수율은 감소되었으나, 압축 및 휨강도는 현저히 증가되었다. 내열수성시험에 의하여 기계적강도는 현저히 감소되었으나, 세공량과 공극률은 현저히 증가되었다. 전자현미경 관찰에서 내열수시험 전의 조직은 견고하게 융착되어 있었으나 내열수시험 후의 조직에서는 폴리머-혼화제가 분해 또는 열화되어 있는 것을 관찰할 수 있었다.