• Journal of the Korean Ceramic Society
• /
• v.55 no.1
• /
• pp.80-84
• /
• 2018

In this study, to improve the dispersity of $Fe_3O_4$ nanoparticles, dispersion properties were considered with various types of functionalization of $Fe_3O_4$ nanoparticles. Due to its high surface area, the electrically neutral state of its surfaces, and its magnetic momentum, $Fe_3O_4$ nanoparticles are easily aggregated in solution. In order to prevent aggregation, $Fe_3O_4$ nanoparticles were functionalized with carboxyl and amine groups in the form of a polymer compound. Carboxyl and amine groups were attached to the surface of $Fe_3O_4$ nanoparticles and the absolute value of the zeta potential was found to be enhanced by nearly 40 eV. Furthermore, the morphology and the magnetic property were analyzed for the application of $Fe_3O_4$ nanoparticles as a magnetic fluid.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.129-129
• /
• 2006

Conventional solvent-based polyurethane (PU) is well established for wide applications, such as textile treatments, surface coating, adhesive and so on. Due to the demands of safety, economic, and environmental protection, the solvent-based PU is restricted and has been phasing out and aqueous-based PU is becoming the world market trend, which is an environmental friendly product. The chemical resistance, physical and mechanical properties of aqueous-based PU are still not competible with solvent-based PU. Because of aqueous-based PU is a linear thermoplastic polymer with lower average molecular weight. Their improvements are normally performed by a post-curing reaction or a polymer hybridization to enhance the polymer cross-linking density. Hybridization of PU with aqueous-based epoxy resin or acrylate emulsion and then cured by a curing agent for improving the performance properties and reducing the cost of aqueous-based PU.Furthermore, a special function is added to aqueous-based PU increasing the application value, for examples, flame retardation, polymeric dyes, hydrophilic and etc.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1625-1628
• /
• 2007

Dispersion of arc-discharged single-walled carbon nanotubes (SWNTs) has been accomplished by a water soluble polymer wrapping functionalization at room temperature. The treated SWNTs were redispersed in both aqueous and many organic solvents and the solutions were found to be stable.

• Journal of Electrochemical Science and Technology
• /
• v.1 no.2
• /
• pp.92-96
• /
• 2010

A new synthesis method for the preparation of Pt electrocatalysts on carbon nanofibers (CNFs) is reported. In this method, Pt electrocatalysts are loaded onto 2-naphthalenethiol (NT) functionalized CNFs. The noncovalent functionalization of CNFs by NT is the effective way for better distribution of Pt particles and higher electrocatalytic activity in polymer electrolyte membrane fuel cells. It was found that the presence of NT acts as a poison to catalysts. Therefore, it is necessary to remove NT through the heat treatment at $400^{\circ}C$.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.11a
• /
• pp.75-78
• /
• 2005

Using a low-energy Ar+ ion-beam with and without reactive gases, polymers such as chemically stable poly(ether ether ketone) (PTFE) and poly(ether ether ketone) (PEEK) films were modified to have special surface features. The adhesion strength between the polymers and the copper was significantly improved because of both changes in the surface topography and chemical interactions due to polymer surface functionalization (oxidation and amination). The surface modification altered the failure mode from adhesive failure for the unmodified polymer/Cu interface to cohesive failure for the surface-modified polymer/Cu layer interface..

• Applied Chemistry for Engineering
• /
• v.23 no.4
• /
• pp.372-376
• /
• 2012

Carbon nanotubes (CNT) are considered as one of ideal nano-fillers in the field of composites with their excellent electrical, mechanical, and thermal properties. Therefore CNT composites are increasingly used in fabricating conductive materials, structural materials with high strength and low weight, and multifunctional materials. The main problem of the CNT composites is difficulty in the dispersion of CNT in the polymer matrix. In this study multi-walled carbon nanotubes (MWNT) were pretreated by the physical process utilizing a wrapping method. After the pretreatment polymer/MWNT nanocomposites were prepared by melt processing. The effect of functionalization MWNT by wrapping with styrene acrylonitrile (SAN) on the mechanical and electrical properties of acrylonitrile butadiene styrene resin (ABS)/MWNT composites was studied by comparing the properties of ABS mixed with the neat MWNT. Electrical and mechanical properties of ABS/MWNT nanocomposites were studied as a function of the functionalization and content of MWNT. The tensile strength of the ABS/MWNT nanocomposites increased, but the impact strength decreased. The polymer wrapping in ABS system has little effect on the improvement of electrical properties.

• Macromolecular Research
• /
• v.14 no.2
• /
• pp.173-178
• /
• 2006

Poly(3-(2-hydroxyethyl)thiophene) (P3HET) was synthesized using oxidative coupling polymerization that involved the protecting and deprotecting of hydroxyl groups but not the chlorine substitution or oxidative decomposition of the hydroxyl groups. The resulting P3HET exhibited good solubility in aprotic solvents, in contrast to the insoluble polymer product synthesized directly from the monomer, 3-(2-hydroxyethyl)thiophene (3HET). P3HET had low conductivity due to the strong hydrogen bonding of its hydroxyl groups. The ester-functionalized poly(3-(2-acetoxyethyl)thiophene) and poly(3-(4-pentylbenzoateethyl)thiophene) were also prepared with reasonably high molecular weights in order to examine how this functionalization modified the physical and chemical properties of P3HET. These polymers exhibited better solubility in common solvents and higher conductivity than P3HET. All these polymers exhibited bathochromic shifts of their film state absorption maxima with respect to those found in the UV-visible spectra of their solution phases. The extent of the bathochromic shift was found to vary with the lengths of the side chains of the ester-functionalized polymers.

• Macromolecular Research
• /
• v.17 no.4
• /
• pp.259-264
• /
• 2009

Chemical modification of magnetic nanoparticles(MNPs) with functional polymers has recently gained a great deal of attention because of the potential application of MNPs to in vivo and in vitro biotechnology. The potential use of MNPs as capturing agents and sensitive biosensors has been intensively investigated because MNPs exhibit good separation-capability and binding-specificity for biomolecules after suitable surface functionalization processes. In this work, we demonstrate an efficient method for the surface modification of MNPs, by combining surface-initiated polymerization and the subsequent conjugation of the biologically active molecules. The polymeric shells of non-biofouling poly(poly(ethylene glycol) methacrylate)(pPEGMA) were introduced onto the surface of MNPs by surface-initiated, atom transfer radical polymerization(SI-ATRP). With biotin as a model of biologically active compounds, the polymeric shells underwent successful post-functionalization via activation of the polymeric shells and bioconjugation of biotin. The resulting MNP hybrids showed a biospecific binding property for streptavidin and could be separated by magnet capture.

• Composites Research
• /
• v.30 no.5
• /
• pp.316-322
• /
• 2017

Carbon fiber is a material with excellent mechanical, electrical and thermal properties, which is widely used as a composite material made of a polymer matrix. However, this composite material has a weak point of interlaminar delamination due to weak interfacial bond with polymer matrix compared with high strength and elasticity of carbon fiber. In order to solve this problem, it is essential to use reinforcements. Due to excellent mechanical properties, graphene have been expected to have large improvement in physical properties as a reinforcing material. However, the aggregation of graphene and the weak interfacial bonding have resulted in failure to properly implement reinforcement effect. In order to solve this problems, dispersibility will be improved. In this study, functionalization of graphene nanoplatelet was proceeded with melamine and mixed with epoxy polymer matrix. The carbon fiber reinforced polymer composites were fabricated using the prepared graphene nanoplatelet/epoxy and flexural properties and interlaminar shear strength were measured. As a result, it was confirmed that the dispersibility of graphene nanoplatelet was improved and the mechanical properties of the composite material were increased.

• Journal of the Korean Society of Industry Convergence
• /
• v.6 no.3
• /
• pp.171-176
• /
• 2003

The poly(triazine bissulfide) synthesized from 6-dibutylamino-1,3,5-triazine-2,4-dithiol with bis(4-chloro-3-nitrophenyl) sulfone in the presence of the phase transfer catalyst, the maximum algebra viscosity (0.57 dL/g) is stable at reaction temperature of $60^{\circ}C$ overall. We could not acquire the good result about solubility, thermal property, and molecular weight to make cast film, we made base for the synthesis of functionalization polymer material.