• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.3
• /
• pp.241-247
• /
• 2014

This study presents the ultrasonic nonlinearity of AISI316 austenitic stainless steels subjected to longterm isothermal aging. These steels are attractive materials for use in industrial mechanical structures because of their strength at high-temperatures and their chemical stability. The test materials were subjected to accelerated heat-treatment in an electrical furnace for a predetermined aging duration. The variations in the ultrasonic nonlinearity and microstructural damage were carefully evaluated through observation of the microstructure. The ultrasonic nonlinearity stiffly dropped after aging for up to 1000 h and, then, monotonously decreased. The polygonal shape of the initial grain structures changed to circular, especially as the annealing twins in the grains dissolved and disappeared. The delta ferrite on the grain boundaries could not be observed at 1000 h of aging, and these continuously transformed into their sigma phases. Consequently, in the intial aging period, the rapid decrease in the ultrasonic nonlinearity was caused by voids, dislocations, and twin annihilation. The continuous monotonic decrease in the ultrasonic nonlinearity after the first drop resulted from the generation of $Cr_{23}C_6$ precipitates and ${\sigma}$ phases.

• Korean Journal of Veterinary Research
• /
• v.38 no.2
• /
• pp.246-257
• /
• 1998

Endocrine cells in the thymus of duck(Anas platyrhynchos platyrhyncos, Linne) were studied immunohistochemically from 23 days of incubation to 32 weeks of age. Somatostatin-, growth hormone(GH)-, gastrin/cholecystokinin(Gas/CCK)-, polypeptide YY(PYY)-, S-100 protein(S-100 P)-, dopamine-, serotonin(5-HT)-, and bovine chromogranin (BCG)-immunoreactive cells were detected in the duck thymus by the PAP techniques. These immunoreactive cells were observed in the medulla and in the juxtacortical medulla. No immunoreactivity of calcitonin and bovine pancreatic polypeptide(BPP) antiserum were observed. The argyrophil cells by Grimelius techniques were observed from 23 days of incubation to 32 weeks of age and peaked in 5 weeks of age. In the early develpmental stage, the argyrophil cells were distributed only in the medulla, while these cells were distributed mainly in the medulla and a few cells were distributed in the corticomedullary junction from 3 weeks of age. These immunoreactive cells were generally round, oval and elliptical and occasionally spindle, polygonal and polymorphous with the long cytopslasmic processes in shape. The present study suggests that the intrathymic endocrine cells may associate with the functional maturation of T-lymphocytes on the establishment of immunity. The further study will be needed to elucidate the function of these thymic endocrine cells.

• International Journal of Ocean System Engineering
• /
• v.1 no.2
• /
• pp.95-101
• /
• 2011

Perforated plates with cutouts (or holes) are widely used in structural members. These cutouts provide stress concentration in plates. Extensive studies have been carried out on stress concentration in perforated plates, which consider cutout shapes, boundary conditions, bluntness of cutouts, and more. This study presents stress concentration analyses of perforated plates with not only various cutouts and bluntness but also different cutout orientations. Especially, the effect of cutout orientation on stress concentration is emphasized since structural members have become more complicated recently. To obtain stress concentration patterns, a finite element program, ANSYS, is used. For the designated goal, three parameters are considered as follows: the shapes of polygonal cutouts (circle, triangle, and square), bluntness (a counter measure of radius ratio, r/R), and rotation of cutouts (${\theta}$). From the analyses, it is shown that, in general, as bluntness increases, the stress concentration increases, regardless of the shape and rotation. A more important finding is that the stress concentration increases as the cutouts become more oriented from the baseline, which is the positive horizontal axis (+x). This fact demonstrates that the orientation is also a relatively significant design factor to reduce stress concentration. In detail, in the case of the triangle cutout, orienting one side of the triangle cutout to be perpendicular to the applied tensile forces is preferable. Similarly, in the case of the square cutout, it is more advantageous to orient two sides of square cutout to be perpendicular to the applied tensile force. Therefore, at the design stage, determining the direction of a major tensile force is required. Then, by aligning those polygon cutouts properly, we can reduce stress concentration.

• Archives of Plastic Surgery
• /
• v.39 no.6
• /
• pp.593-599
• /
• 2012

Background This study aimed to investigate the possibility of isolating mesenchymal stem cells (MSCs) from human thigh adipose tissue and the ability of human thigh adipose stem cells (HTASCs) to differentiate into hepatocytes. Methods The adipose-derived stem cells (ADSCs) were isolated from thigh adipose tissue. Growth factors, cytokines, and hormones were added to the collagen coated dishes to induce the undifferentiated HTASCs to differentiate into hepatocyte-like cells. To confirm the experimental results, the expression of hepatocyte-specific markers on undifferentiated and differentiated HTASCs was analyzed using reverse transcription polymerase chain reaction and immunocytochemical staining. Differentiation efficiency was evaluated using functional tests such as periodic acid schiff (PAS) staining and detection of the albumin secretion level using enzyme-linked immunosorbent assay (ELISA). Results The majority of the undifferentiated HTASCs were changed into a more polygonal shape showing tight interactions between the cells. The differentiated HTASCs up-regulated mRNA of hepatocyte markers. Immunocytochemical analysis showed that they were intensely stained with anti-albumin antibody compared with undifferentiated HTASCs. PAS staining showed that HTASCs submitted to the hepatocyte differentiation protocol were able to more specifically store glycogen than undifferentiated HTASCs, displaying a purple color in the cytoplasm of the differentiated HTASCs. ELISA analyses showed that differentiated HTASCs could secrete albumin, which is one of the hepatocyte markers. Conclusions MSCs were islolated from human thigh adipose tissue differentiate to heapatocytes. The source of ADSCs is not only abundant abdominal adipose tissue, but also thigh adipose tissue for cell therapy in liver regeneration and tissue regeneration.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.53 no.1
• /
• pp.90-97
• /
• 2020

The purpose of this study was to provide basic information on sexual maturity and reproductive biology for the management of biological resources in abalone Haliotis discus hannai. The nucleus of the oogonium occupied about 42% of the cytoplasm, and had a distinctive basophilic chromatin. The cytoplasm of previtellogenic oocytes was homogeneous and the size of nuclear pores increased. Fine granular and vacuolar yolk granules were observed in the cytoplasm of the initial vitellogenic oocyte. In this stage, the egg stalk and jelly membrane began to develop. The nucleus of the active vitellogenic oocyte was located near the animal pole. Yolk granules were strongly acidophilic. Lampbrush chromosomes were observed in the nucleus and rough endoplasmic reticulum. Annulate lamellae developed in the cytoplasm. The shape of the ripe oocyte was rounded polygonal. The size of ripe oocytes was 202.9±21.40×142.1±18.82 ㎛ and the thickness of the jelly membrane was 10.1±1.52 ㎛. These results show that yolk accumulation in H. discus hannai is based on two methods: exogenous accumulation, through the egg stalk, and endogenous accumulation, through intracellular organelles. Management of biological resources will be necessary when oocytes predominate after the active vitellogenic stage.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.201-205
• /
• 1997

With the recent advance of Web and its associated technologies, information sharing on distribute computing environments has gained a great amount of attention from many researchers in many application areas, such as medicine, engineering, and business. One basic requirement of distributed medical consultation systems is that geographically dispersed, disparate participants are allowed to exchange information readily with each other. Such software also needs to be supported on a broad range of computer platforms to increase the software's accessibility. In this paper, the development of world-wide-web based medical consultation system or radiology imaging is addressed to provide the platform independence and great accessibility. The system supports sharing of 3-dimensional objects. We use VRML (Virtual Reality Modeling Language), which is the de-facto standard in 3-D modeling on the Web. 3-D objects are reconstructed from CT or MRI volume data using a VRML format, which can be viewed and manipulated easily in Web-browsers with a VRML plug-in. A Marching cubes method is used in the transformation of scanned volume data set to polygonal surfaces of VRML. A decimation algorithm is adopted to reduce the number of meshes in the resulting VRML file. 3-D volume data are often very large-sized, and hence loading the data on PC level computers requires a significant reduction of the size of the data, while minimizing the loss of the original shape information. This is also important to decrease network delays. A prototype system has been implemented (http://netopia.snu.ac.kr/-cyber/). and several sessions of experiments are carried out.

• Journal of Welding and Joining
• /
• v.32 no.1
• /
• pp.93-101
• /
• 2014

This study aims to investigate the effect of heat input of outside SAW weld on low temperature toughness($-20^{\circ}C$) of inside SAW weld for API 5L X70 with sour gas resistance. As increasing heat input of the outside weld, low temperature toughness of the inside weld was decreased. Especially, in spite of the same heat input, the value of low temperature toughness was fluctuated. On the basis of fracture and microstructure analysis, the low temperature toughness is correlated with the fracture area ratio of shear lips and four kinds of fracture sections. These sections were divided with size and shape of dimple correlated with grain boundary ferrite and cleavage correlated acicular and polygonal ferrite in grain. Therefore, it was seen that these sections were two of final solidification area in the inside weld and the outside weld, no reheated zone and reheated zone in the inside weld. In conclusion, it is thought that the difference of low temperature toughness at the same heat input is due to the fact that each of impact test specimens could have the different microstructure, even though the notch was machined under the error tolerance of 1mm. It is because the final solidification area of the inside weld is very narrow.

• Korean Journal of Food Science and Technology
• /
• v.31 no.6
• /
• pp.1410-1414
• /
• 1999

The granular size and shape of durian seed starch were $2.0-10.0\;{\mu}m$ and oval and polygonal. Amylose contents of durian seed, corn, sweet potato and potato starch were 28.3%, 27.5%, 20.3% and 21.7%, respectively. Blue value of durian seed (0.370) higher than that of corn (0.368), sweet potato (0.332), and potato starch (0.338). Alkali numbers of durian seed, corn, sweet potato and potato starch were 7.39, 9.02, 7.08 and 5.43, respectively. Swelling power of durian seed starch was similar to that of sweet potato starch. X-ray diffraction patterns of durian seed starch showed an A-type crystalline structure. According to pasting properties by Rapid Visco-Analyzer, the gelatinization temperature of durian seed starch $(76.6^{circ}C)$ was higher than that of corn $(73.0^{circ}C)$, sweet potato $(72.3^{circ}C)$ and potato starch $(70.2^{circ}C)$. The breakdown of durian seed starch were lower than that of corn, sweet potato and potato starch.

• Korean Journal of Food Science and Technology
• /
• v.32 no.2
• /
• pp.258-264
• /
• 2000

Starches from the eight varieties of rice were analyzed using scanning electron microscope(SEM), differential scanning calorimetry(DSC) and X-ray diffractometry, and tested on the starch-granule susceptibility to 15% $H_2SO_4$ and glucoamylase. The shape of starch granules from normal rice varieties and low-amylose mutants were polygonal while shrunken and floury mutants were globular. According to DSC, starches from Nampung CB243 showed higher onset temperature$(T_o)$, completion temperature$(T_c)$ and Punchilmi, Nampung EM90 showed higher enthalpy$({\triangle}H)$ of gelatinization than others. shr showed the highest hydrolysis rate to 15% $H_2SO_4$ while Nampung CB243 showed the lowest one. Eight varieties of rice starch granules showed A-type pattern on X-ray diffractograms. The lower amylose content rice varieties showed the higher hydrolysis rate treated with glucoamylase.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.5
• /
• pp.765-769
• /
• 2001

Starches of flavored glutinous rice were analyzed by using scanning electron microscope (SEM) and differential scanning calorimetry (DSC) and tested on the starch granule susceptibility to 15% H$_2$SO$_4$, glucoamylase and $\alpha$-amylase. The shape of starch granules form flavored glutinous rice varieties was polygonal and the size was 4~6 $\mu$m in diameter. According to DSC, glutinous rice starch showed onset temperature (T$_{o}$) range 59.8~62.5$^{\circ}C$ and KR92021-B-B-42-3-B and KR92021-B-B-165-1-B showed higher enthalpy ($\Delta$H) on gelatinization than others. The starches from KR92021-B-B-5-2-B and KR92021-B-B-42-3-B showed lower hydrolysis rate using 15% H$_2$SO$_4$ than KR92021-B-B-165-1-B. KR92021-B-B-5-2-B showed higher degree of hydrolysis of glucoamylase and $\alpha$-amylase than the others.