• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.177-178
• /
• 2002

일반적으로 폴리에틸렌테레프탈레이트(polyethylene terephthalate)는 에틸렌글리콜(ethylene glycol)과 테레프탈산(terephthalic acid) 또는 디메틸렌 테레프탈레이트(dimethylene terephthalate)를 중합시켜 만든다[1]. 폴리에스테르는 전도성 필름, 전기전자분야, 청량음료의 병 등으로 널리 사용되고 있다. 또한 뛰어난 강도, 내열성을 이용하여 자동차분야, 전기분야에서 금속, 페놀수지를 대체하는 용도로 사용되고 있다. (중략)

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.10a
• /
• pp.195-198
• /
• 2001

최근 지능재료에 관한 연구가 형상기억합금, 반도체 재료, 의료용 재료, 고분자 재료 등에서 활발히 이루어지고 있다. 지능재료 중 형상기억재료는 형상기억, 형상고정, 충격흡수 등의 효과를 갖기 때문에 열적, 역학적, 전기적 및 자기적(magnetic) 자극을 감지함으로써 형상, 위치, 탄성계수, damping, 마찰 등의 특성변화를 통하여 응답을 할 수 있어 응용이 다양하다 형상기억고분자의 경우 가볍고 형상회복률이 높으며 가공성이 우수한 장점을 가지고 있다. (중략)

• Steel and Composite Structures
• /
• v.45 no.1
• /
• pp.147-157
• /
• 2022

This study assessed the compressive and tensile strengths and modulus of elasticity of waste polyethylene terephthalate (PET) using the ASTM standard tests. In addition, short carbon and glass fibers were mixed with waste PET to examine the improvements in ductility and strength during compression. The bonding was examined via field-emission scanning electron microscopy. The strength degradation of the waste PET tested under UV was 40-50%. However, it had a compressive strength of 32.37 MPa (equivalent to that of concrete), tensile strength of 31.83 MPa (approximately ten times that of concrete), and a unit weight of 12-13 kN/m3 (approximately half that of concrete). A finite element analysis showed that, compared with concrete, a waste PET pile foundation can support approximately 1.3 times greater loads. Mixing reinforcing fibers with waste PET further mitigated this, thereby extending ductility. Waste PET holds excellent potential for use in foundation piles, especially while mitigating brittleness using short reinforcing fibers and avoiding UV degradation.

• Proceedings of the Korean Fiber Society Conference
• /
• 1987.06a
• /
• pp.44-45
• /
• 1987

• Proceedings of the Korean Fiber Society Conference
• /
• 1995.04a
• /
• pp.41-41
• /
• 1995

• Proceedings of the Korean Fiber Society Conference
• /
• 1995.04a
• /
• pp.30-31
• /
• 1995

• Proceedings of the Korean Fiber Society Conference
• /
• 1996.04a
• /
• pp.217-219
• /
• 1996

• Proceedings of the Korean Fiber Society Conference
• /
• 1996.10a
• /
• pp.534-538
• /
• 1996

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.545-546
• /
• 2009

This study was performed to prove the possibility of utilizing short plastic fibers made for recycled polyethylene terephthalate (RPET) as a structural material. To measure of crack control capacity, restrained drying shrinkage cracking test was performed. In order to verify the capacity of RPET fiber, it was compared with poly propylene (PP) fiber, most widely used short synthetic fiber, for fiber volume fraction of 0%, 0.5%, 0.75%, and 1.0%.

• Textile Coloration and Finishing
• /
• v.31 no.2
• /
• pp.107-117
• /
• 2019

In case of pure rubber materials, the initial quality of the rubber materials would be excellent, however, the durability against external impact might be poor. In order to overcome the relatively low durability, textile cord could be employed with silicone rubber. We have studied the improvement of heat-resistant adhesion properties of silicone adhesives between silicone rubber and PET fibers by applying various conditions including dip solution recipe. The silicone rubber used was a platinum catalyst curing type and platinum catalyst type silicone adhesive was used as an adhesive to obtain an optimum adhesive force. Furthermore, the bonding mechanism between silicone and PET fiber was established.