• 화훼연구
• /
• 제19권4호
• /
• pp.212-218
• /
• 2011

식용꽃은 일반적으로 개화된 상태에서 수확, 줄기가 없는 상태에서 유통되므로 저장성이 급격히 저하되는 것이 단점이다. 이에 본 연구는 여러 종류의 포장 필름 중 식용꽃의 상온유통을 위한 효과적인 포장재를 선발하기 위하여 실시하였다. 식용꽃 재료로는 꾸준한 수요로 연중생산 되고 있는 금어초, 금잔화, 비올라, 패랭이, 팬지, 한련화 등 총 6종으로 실시하였다. 유통 시 적용할 포장 필름을 선발하기 위하여 0.03mm 두께의 polyethlene (PE) film와 polypropylene (PP) film을 대조구로 하였으며 필름 표면의 미세한 천공을 통해 산소투과도 (OTR-Oxygen Transmission Rate)를 조절할 수 있는 6가지 종류의 필름인 PE 0.03 mm (LF10, LF20, LF30), PP 0.0 3mm (LF10, LF20, LF30) 등을 이용하였다. 식용꽃의 상온 유통시 금잔화, 한련화는 필름별 차이가 없었으며, 비올라, 패랭이, 팬지는 PP (LF10)필름이 효과적인 것으로 나타났다. 비올라, 패랭이, 팬지는 꽃잎이 바깥쪽부터 말리기 시작하면서 노화 증상이 나타났고, 한련화는 꽃잎 무름과 변색, 금어초는 갈색 점이 나타나면서 부패증상이 나타나는 등 식용꽃 종류별로 노화 유형이 뚜렷하게 구분되었다.

• 한국버섯학회지
• /
• 제17권1호
• /
• pp.7-11
• /
• 2019

흑목이 재배가 어려운 고온기에 에너지와 시설투자비용을 절감할 수 있는 재배방법을 틈새소득작물로 알아보기 위해 간이재배사와 공조재배사에서 털목이 '건이'의 재배특성을 비교하였다. 시험은 6월 15일부터 7월 13까지 3일 간격으로 밀폐형 공조시설재배사와 비닐하우스 간이재배사에 톱밥봉지배지(0.9 kg)를 입상하여 7월 26까지 수확하였다. 생육조건은 공조재배사는 온도 $23^{\circ}C$, 습도 90~95% 조건을 유지하면서 1회/일 관수하였고 간이재배사는 2~3회/일 관수로 온도조절시설은 가동하지 않았다. 그 결과 간이재배사에서 재배한 자실체크기는 공조재배사보다 다소 컸으며, 물리성은 큰 차이를 보이지 않았다. 또한 자실체 명도는 간이재배사가 공조재배사보다 낮아 진한색을 나타냈다. 입상시기별로 수량성은 차별화된 경향을 찾을 수 없었으며 하우스 재배사의 경우 308 g/0.9 kg, 공조재배사에서는 252 g/0.9 kg으로 하우스 재배사에서 22% 더 높았다. 따라서 털목이 '건이' 품종은 여름철 냉방기를 가동하지 않는 간이재배사에서 재배가 가능하여 틈새소득작물로 에너지 비용 절감 효과가 기대되었다.

• 한국작물학회지
• /
• 제68권3호
• /
• pp.207-215
• /
• 2023

농업 현장에서 많이 사용되고 있는 생분해성 멀칭필름 2종(BFI, BFII)이 토양환경과 동계작물인 양파(Allium cepa L.)의 생육과 수량에 미치는 영향을 무처리(NM)와 PE필름(PEF)과 비교하기 위하여 수행되었다. 1. 생분해 필름은 150일 차부터 필름 표면의 붕괴가 모두 육안상 관찰되었다. 2. BFII 자재 내 투광률은 150일 차부터 증가하였고, 180일차 이후에는 중량 유지율이 90% 이하로 가장 낮게 나타났고, 경운 후 분해율도 가장 빨랐다. 3. 토양수분함량은 NM 처리구에서 -14 kP~0 kPa까지 가장 변동 폭이 컸고 토양 최소온도는 BFI 처리구에서 가장 높게 유지되었다. 4. 토양 유기물 함량은 멀칭구에서 낮은 수준을 보였고, 토양 내 무기성분 및 용적밀도, 세균 수는 처리 간에 통계적으로 유의적인 차이가 나타나지 않았다. 5. 양파의 뿌리신장은 생육 초기인 60일 차까지는 PEF와 BFI 처리에서 증가 폭이 컸고 줄기는 150일 차부터 PEF와 BFI에서 가장 많이 신장되었다. 6. 180일 차에 양파의 직경과 길이 및 무게, 그리고 도복율도 PEF와 BFI에서 가장 높은 수준을 보였다. 7. 230일 차에 양파 구근을 크기별로 분류한 결과, 양파 "특"의 수량은 BFI 처리에서 ha당 55.3톤으로 가장 많아 상품성이 높았고, PE (49.3톤), NM (9.4톤), BFII (2.7톤) 순으로 조사되었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.76-76
• /
• 2012

Surface engineering of polymers has a broad array of scientific and technological applications that range from tissue engineering, regenerative medicine, microfluidics and novel lab on chip devices to building mechanical memories, stretchable electronics, and devising tunable surface adhesion for robotics. Recent advancements in the field of nanotechnology have provided robust techniques for controlled surface modification of polymers and creation of structural features on the polymeric surface at submicron scale. We have recently demonstrated techniques for controlled surfaces of soft and relatively hard polymers using ion beam irradiation and plasma treatment, which allows the fabrication of nanoscale surface features such as wrinkles, ripples, holes, and hairs with respect to its polymers. In this talk, we discuss the underlying mechanisms of formation of these structural features. This includes the change in the chemical composition of the surface layer of the polymers due to ion beam irradiation or plasma treatment and the instability and mechanics of the skin-substrate system. Using ion beam or plasma irradiation on polymers, we introduce a simple method for fabrication of one-dimensional, two-dimensional and nested hierarchical structural patterns on polymeric surfaces on various polymers such as polypropylene (PP), polyethylene (PE), poly (methyl methacrylate) PMMA, and polydimethylsiloxane (PDMS).

• 교육시설 논문지
• /
• 제20권4호
• /
• pp.35-43
• /
• 2013

Some results of experimental investigation conducted to assess the effect of cement composite strength and ductility on the shear behavior and crack-damage mitigation of stud connections between existing reinforced concrete frame in school buildings and seismic strengthening elements from cyclically direct shear tests are described. The cement composite strengths include 50 for medium strength and 70 MPa for high strength. Two types of cement composites, strain-hardening cement composite (SHCC) and non-shrinkage mortar, are used for stud shear connection specimens. The special SHCCs are reinforced with hybrid 0.2% polyethylene (PE) and 1.3% polyvinyl alcohol (PVA) fibers at the volume fraction and exhibits tensile strain capacity ranging from 0.2 to 0.5%. Test result indicates that SHCC improves the seismic performance and crack-damage mitigation of stud shear connections compared with stud connections with non-shrinkage mortar. However, the performance enhancement in SHCC stud connections with transverse and longitudinal reinforcements is less notable for those without additional reinforcement.

• Bulletin of the Korean Chemical Society
• /
• 제34권6호
• /
• pp.1651-1655
• /
• 2013

Anion exchange membranes for a vanadium redox flow battery (VRB) were prepared by pore-filling on a PE substrate with the copolymerization of vinylbenzyl chloride (VBC) and glycidyl methacrylate (GMA). The ion exchange capacity, water uptake and weight gain ratio were increased with a similar tendency up to 65% of GMA content, indicating that the monomer improved the pore-filling degree and membrane properties. The vanadium ion permeability and open-circuit voltage were also investigated. The permeability of the VG65 membrane was only $1.23{\times}10^{-7}\;cm^2\;min^{-1}$ compared to $17.9{\times}10^{-7}\;cm^2\;min^{-1}$ for Nafion 117 and $1.8{\times}10^{-7}\;cm^2\;min^{-1}$ for AMV. Consequently, a VRB single cell using the prepared membrane showed higher energy efficiency (over 80%) of up to 100 cycles compared to the commercial membranes, Nafion 117 (ca. 58%) and AMV (ca. 70%).

• Corrosion Science and Technology
• /
• 제3권1호
• /
• pp.20-25
• /
• 2004

In order to clarify the durability of protective coatings for maritime steel structures, various anti-corrosive organic coated steel samples were exposed for twelve years in semitropical marine environment at Miyakojima Island, Okinawa, JAPAN. Samples were various organic coated steel pipes, 4.0 m in length and 150 mm in diameter. While the bare steel pipe entirely corroded in 4.5 mm thickness in four and half years, these organic coated steel pipes exhibited protective appearances after twelve-year-exposure except for the defect in the coatings. Polyethylene (PE) lining pipe exhibited a good protective performance. Urethane painted pipe was also good but some barnacles stuck to its surface. A combination of petrolatum tape and FRP cover showed sufficient corrosion resistance for steel surface. The correlation in results between exposure and laboratory acceleration test was examined. It was found that salt spray test (SST) results corresponded to rusted area of scratched portion and that adhesion change of coating layer corresponded to the rotating immersion test result. Among the on-site measured data, volume resistivity is utilized for the index of corrosion protection performance of organic coating.

• 한국환경과학회지
• /
• 제19권12호
• /
• pp.1355-1359
• /
• 2010

The application of metal caps has been continuously increased as real life are extended. Metal caps is usually made of aluminum and polyethylene(PE) as packing. Since metal caps contain 75% aluminum on a weight basis, metal caps may be a valuable source when these were properly recovered. The recovery methods of metal caps have mechanical peeling and incineration. However these are either hard to apply in some case or environmentally unacceptable. So in this investigation, recovery method of aluminum from metal caps was investigated using pyrolysis. The result shows that pyrolysis temperature and pyrolysis time was $450^{\circ}C$ and 120min. respectively. Also 100% of aluminum was recovered from metal caps. Heat content of recovered oil was high enough to use as a fuel representing 7,425.0, 7,793.1, 7,583.2, 7,726.2(cal/g). Heavy metal contens in the oil were under regulatory limit indicating.

• 한국식품위생안전성학회지
• /
• 제10권2호
• /
• pp.97-102
• /
• 1995

For improved preservation of boiled-dried anchovies, the current preservation method of corrugated-cardboard box packaging and freezing below -18$^{\circ}C$ was compared to the nylon/polyethylene(NY/PE) packaging along with cooling temperature ranging from 5$^{\circ}C$ to 1$0^{\circ}C$ as well as ambient condition for eight months by determining physicochemical quality of stored samples. Lipid oxidation of stored anchovies and their browning increased with storage time. The phenomenon was delayed under the conditions of lower temperature and air-tight packaging. As quality-indicative criteria of stored anchovies, carbonyl value(r=-0.989), browning (r=-0.949) and color a value(r=-0.989), browning(r=-0.965), Hunter's color b value(r=-0.949) and color a value(r=-0.940) showed a highly-negative correlations with organoleptic qualities of the samples. Based on the above results, air-tight packaging in a laminated film and subsequent storage at cooling temperature was found to be a possible alternative to the current freezing-storage of boiled-dried anchovies from the physicochemical point of view.

• Ocean and Polar Research
• /
• 제23권3호
• /
• pp.305-310
• /
• 2001

This paper describes a floating fish reef technology for enhancement of fisheries productivity in the muddy areas. The floating fish reef was composed of main fish cage, anchor rope and concrete anchor blocks. Main fish cage was made up of 12 steel buoys measuring 0.37m in diameter and 1.5m long, polyethylene (PE) netting and circular steel rings. Each steel buoy had buoyancy of 110kgf. The size of main fish cage was 1.96 m in diameter and 3.75m in length. Monitoring on its durability was made for eight months after installation. The steel buoys fixed on main fish cage and nettings were observed to be kept safely. The wet weight of fouling organisms per unit area$(m^2)$ was 26.6kgf after eight months. Reduction in the cross-section of steel buoys and circular steel rings of main fish cage were not found. In addition, any cracks on the concrete anchor blocks were not observed.