한국해양정보통신학회 2004년도 SMICS 2004 International Symposium on Maritime and Communication Sciences
/
pp.110-112
/
2004
Poyethylene films can be modified by radiation grafting of N-vinyl pyrollidone using y-radiation. FTIR spectra were used to confirm the modification of PE films. The modified films were activated by two-step and one step methods for electroless Cu plating. Morphology of metallized films has been investigated. Electroless Cu plating onto the modified films depends mainly on the grafting degree and activation type. The conductivity of the metallized films has been investigated.
Many of the physical and chemical properties of polymer materials can be altered by high energy radiation. In the present work the exposure to radiation of low density polyethylene(LDPE) included antioxidants was carried out at various doses up to 600kGy at a dose rate of 5kGy/hr in the presence of air at room temperature. The study of the irradiation effects on the material properties has been make by different methods in an integrated way. The experimental data indicate that the decomposition onset temperature(DOT), the crystallinity and the thermoluminescence(TL) with radiation dose. DOT, crystallinity and TL analysis from irradiated PE samples provides useful data for the characterization of radiation-induced oxidation effects on these samples.
This paper describes the dielectric analysis of several insulators for home appliances. The dielectric characteristics of ABS(acrylonitrile butadiene styrene) were tested in relative permittivity, dielectric loss($tan{\delta}$) and specific resistance and compared with those of the other 4 insulators of PE(polyethylene) series. As a result, the relative permittivity of only the ABS slightly decreased with temperature. In the case of the tan6, the ABS showed higher dielectric loss than the other insulators but more excellent thermal performance. In addition, its changing pattern in specific resistance was very similar to that in $tan{\delta}$.
카라기난필름과 카라기난 코팅종이의 유지투과도를 측정하였으며 현재 외식산업분야에서 널리 사용되고 있는 Polyethylene (PE) 코팅종이를 대체할 수 있는 가능성을 조사하였다. 카라기난필름과 카라기난 코팅종이의 유지투과도는 매우 낮은 것으로 나타났으며, 카라기난 중에서는 ${\kappa}$-카라기난의 유지투과도가 가장 낮았다. 카라기난이 $4{\sim}5\;kg/ream\;(278m^2)$ 정도 코팅된 종이의 유지투과도는 PE 코팅종이의 유지투과도와 비슷한 것으로 나타났으며, 카라기난 필름의 유지투과도는 카라기난 코팅종이의 10배정도 낮은 것으로 나타났다. 카라기난필름과 카라기난 코팅종이의 유지투과도는 시간에 따라 지수적으로 증가하는 것으로 나타났으며, 카라기난이 4kg/ream 이상 코팅된 종이는 유지투과도가 낮아 외식산업에서 유지함량이 많은 식품의 포장에 사용될 수 있을 것으로 사료된다.
SHCCs는 섬유와 시멘트 메트릭스 계면의 부착작용으로 인해 높은 에너지 흡수능력을 보여준다. 서로 다른 종류의 섬유로 보강된 SHCCs는 혼입되는 섬유자체가 가지는 재료적 특성 및 물시멘트비에 따라 서로 다른 특성을 나타내기 때문에 SHCCs의 압축, 휨, 직접인장 등의 역학적 특성에 관한 평가가 필요할 것으로 판단된다. 이러한 목적으로 본 연구에서는 PP2.0%, PVA2.0%, PE2.0%의 세종류의 단독섬유를 혼입하여 물시멘트비 0.45, 0.60으로 실험을 실시하였다. 실험결과, PP섬유를 혼입한 시험체에 비해 PVA 및 PE섬유를 혼입한 시험체에서 휨 및 직접인장특성에서 전반적으로 뛰어난 성능을 나타내었다. 또한 동일한 섬유 및 혼입율에서 물시멘트비 0.45인 시험체에서 물시멘트비 0.60인 시험체에 비해 약 2배정도의 높은 압축강도를 나타내었으며, 휨 및 직접인장거동시 시험체 전반에 걸쳐 미세균열이 진전되는 특성을 나타내었다. 따라서 물시멘트비 0.60에서 SHCCs의 시공성능 및 분산성능 향상을 위한 지속적인 연구가 필요할 것으로 사료된다.
This study was carried out to select optimal shade materials among four-layered polyethylene (PE) net (FLPN), aluminium-coated PE sheet (APSS), and blue PE sheet (BPSS) in condition of paddy field cultivated 6-year-old ginseng. The order of light-penetrated ratio and air temperature by shade materials was BPSS > APSS > FLPN. Light-penetrated ratio of BPSS before two fold shade was more 3 times and 2 times than that of FLPN and APSS, respectively. Air temperature of BPSS was also higher $1.6^{\circ}C$ and $1.4^{\circ}C$ than that of FLPN and APSS, respectively. BPSS showed good cultural environment because all of light-penetrated ratio and air temperature were become higher in spring and fall season but lower in summer season by additional shade with two-layered PE net. Survived-leaf ratio was highest in BPSS and lowest in FLPN causing a little water leak on a rainy day. Rusty-root ratio was also highest in FLPN because soil moisture content was increased by water leak. The order of root yield was BPSS > APSS > FLPN, and the cause of highest yield in BPSS was higher light-penetrated ratio during spring and fall season, higher survived-leaf ratio, and lower rusty-root ratio than that of APSS and FLPN. BPSS showed highest total ginsenoside content because of high light-penetrated ratio, blue light effect, and the difference in dry matter partitioning ratio such as low taproot ratio, and high lateral root ratio.
카라기난을 사용하여 제조한 생분해성 필름의 분말식품에 대한 응용성을 조사하기 위한 연구의 일환으로 3종의 두께(0.05, 0.08, 0.11 mm)로 제작된 카라기난 필름을 사용하여 5가지의 온도(20, 25, 30, 35, $4^{\circ}C$)와 3가지의 상대습도(50, 70, 90%RH) 조건에서 수증기투과율을 측정하여 카라기난 필름의 투습 특성을 조사하였다. 카라기난 필름의 수증기투과율은 PE 필름보다 2.3배 정도 높았으며, 투습계수는 PE 필름보다 45-230배 정도 높아 수증기투과도가 높음을 알 수 있었다. 카라기난 필름의 투습계수는 다른 친수성의 가식성 필름과 마찬가지로 필름의 두께가 증가할수록 직선적으로 증가하는 경향을 보였다. 카라기난 필름의 투습계수는 온도에 대한 의존성을 나타내지 않았으나, 수증기투과율은 온도에 대한 의존성을 나타냈다. 카라기난 필름의 수증기투과율의 활성화 에너지는 필름의 두께에 따라 7.898-12.872 kj/mol의 값을 보였다. 카라기난 필름의 수증기투과율은 활성화 에너지 값이 커짐에 따라 지수앞인자의 값도 증가하는 kinetic compensation 현상을 나타냈다.
이 연구는 섬유 보강 시멘트 복합체(SHCC) 내에 매립된 철근의 겹침이음 성능을 평가하고자 하였으며, 이에 따라 단조 및 반복 재하시의 겹침이음된 철근의 인장 실험을 실시하였다. 총 10개의 SHCC 및 콘크리트 배합이 계획되었으며, 실험체의 변수는 보강섬유 종류(폴리에틸렌 및 강섬유), 팽창재 대체율(0% 및 10%) 및 실험체의 설계강도(30 MPa 및 100 MPa)로 계획하였다. SHCC 및 콘크리트 배합에 매립된 철근의 겹침이음 길이는 각각 콘크리트 구조설계 기준에 의거하여 산정된 겹침이음 길이의 60% 및 100%를 적용하였다. 실험 결과 SHCC에 철근이 매립될 경우 철근의 겹침이 음 성능을 향상시키는 것으로 나타났으며, SHCC 배합에서 보강 섬유 종류(PE-SHCC 및 PESF-SHCC)에 관계없이 겹침 이음된 철근의 인장강도 및 부착강도 증진에 기여하는 것으로 나타났다. 또한 SHCC에 팽창재를 대체할 경우 SHCC에 매립된 철근 겹침이음부의 거동 특성을 개선하는 특징을 보였다. 한편 균열 특성에서는 배합조건 및 재료특성에 따라 PE-SHCC가 PESF-SHCC에 비해 보다 많은 미세균열 특성을 나타내었다. 전언한 바와 같이 이 연구는 SHCC의 변형경화 특성에 따라 매립된 철근과의 상호작용을 증진시킴에 따라, SHCC에 매립된 철근 겹침이음 길이를 감소할 경우에도 양호한 거동 특성을 보이는 것으로 판단된다.
최근 미국에서는 가동기간이 오래된 원전 매설배관에서 부식 및 침식에 의해 삼중수소 누설로 지하수가 오염되는 사례가 급증하고 있다. 따라서, 현재 원전 안전등급 매설배관으로 사용되고 있는 금속재료의 배관을 대신해서 부식 및 침식 등의 열화 손상에 대한 저항성이 우수한 고밀도 폴리에틸렌(HDPE) 배관을 ASME Code Class 3 안전계통 배관으로 사용하기 위한 연구가 수행되고 있다. 본 연구에서는 발전소 가동 중 매설배관에 가해질 수 있는 하중과 온도 범위를 바탕으로 HDPE 배관 융착부에 대한 인장 시험과 저속균열성장 (SCG) 시험을 수행하였다. 시험 결과로 얻은 SCG 시험편의 파단면을 분석하여 HDPE 재료의 파손 기구를 파악하였다. 이를 바탕으로 3D 유한요소 해석을 이용하여 균열이 있는 HDPE 재료가 버틸 수 있는 한계하중에 대한 검증을 수행하였다.
본 연구에서는 용융법에 의한 저밀도폴리에틸렌 나노복합재료를 제조하였으며, 구조변화, organo-clay의 분산정도, 열적 특성 및 난연 특성을 조사하였다. LDPE/PE-g-MA/organo-clay의 조성비가 90/10/1~10 (w/w/w)일 때, XRD 분석 결과 clay 층간간격이 증가함을 알 수 있었으며, TEM을 이용하여 organo-clay의 분산을 관찰하였는데, 대체적으로 organo-clay가 일정한 방향성을 가지며 잘 분산되어 있음을, 즉 삽입형(intercalation) 나노복합체가 형성되었음을 확인할 수 있었다. 또한 LDPE 나노복합재료의 분해온도가 순수한 LDPE에 비해 약 $80^{\circ}C$ 정도 상승함으로써 열적특성이 현저히 증가함을 알 수 있었고, organo-clay 5.0 wt% 범위 내에서 organo-clay의 함량이 증가함에 따라 LOI가 증가함을, 그 이상에서는 더 이상의 LOI 증가를 보이지 않음을 알 수 있었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.