• Macromolecular Research
• /
• 제15권6호
• /
• pp.565-574
• /
• 2007

In this study, five representative, commercially available polymers, Ultem 1000 polyetherimide, Kapton polyimide, phenolic resin, polyacrylonitrile and cellulose acetate, were used to prepare pyrolyzed polymer membranes coated on a porous {\alpha}-alumina$ tube via inert pyrolysis for gas separation. Pyrolysis conditions (i.e., final temperature and thermal dwell time) of each polymer were determined using a thermogravimetric method coupled with real-time mass spectroscopy. The surface area and pore size distribution of the pyrolyzed materials derived from the polymers were estimated from the nitrogen adsorption/desorption isotherms. Pyrolyzed membranes from polymer precursors exhibited type I sorption behavior except cellulose acetate (type IV). The gas permeation of the carbon/{\alpha}-alumina$ tubular membranes was characterized using four gases: helium, carbon dioxide, oxygen and nitrogen. The polyetherimide, polyimide, and phenolic resin pyrolyzed polymer membranes showed typical molecular sieving gas permeation behavior, while membranes from polyacrylonitrile and cellulose acetate exhibited intermediate behavior between Knudsen diffusion and molecular sieving. Pyrolyzed membranes with molecular sieving behavior (e.g., polyetherimide, polyimide, and phenolic resin) had a $CO_2/N_2$ selectivity of greater than 15; however, the membranes from polyacrylonitrile and cellulose acetate with intermediate gas transport behavior had a selectivity slightly greater than unity due to their large pore size.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.214-217
• /
• 2004

The cure kinetics of blends of epoxy(tetraglycidyl-4,4'-diaminodiphenylmethane ; TGDDM)/curing agent(diaminodiphenyl sulfone ; DDS) resin with amine terminated polyetherimide-CTBN-amine terminated polyetherimide triblock copolymer(ABA) were studied using differential scanning calorimetry under isothermal conditions to determine the reaction parameters such as activation energy and reaction constants. By increasing the amount of ABA in the blends, the final cure conversion was decreased. Lower values of the final cure conversions in the epoxy/ABA blends indicated that ABA hinders the cure reaction between the epoxy and curing agents. 1be value of the reaction order, m, for the initial autocatlytic reaction was not affected by blending ABA with epoxy resin, and the value was approximately 1.0. The value of n for the nth order component in the autocatalytic analysis was increased by increasing the amount of ABA in the blends, and the value increased from 2.0-3.4. A diffusion controlled reaction was observed as the cure conversion increased and the rate equation was successfully analyzed by incorporating the diffusion control term for the epoxy/DDS/ABA blends.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1999년도 춘계 총회 및 학술발표회
• /
• pp.45-48
• /
• 1999

• 한국막학회:학술대회논문집
• /
• 한국막학회 1996년도 춘계 총회 및 학술발표회
• /
• pp.42-43
• /
• 1996

고분자 분미막을 이용한 분리기술은 기존의 분리기술에 비하여 에너지의 절약과 높은 분리효율 등의 장점이 있어 거의 모든 산업에 이용되고 있다. 분리막의 용도가 다양화됨에 따라서 내열성, 내약품성, 내유기용매성을 갖는 막소재의 개발이 필요하게 되었다. polyimide(PI)게의 고분자는 물리, 화학적 성능이 우수하고 내열성과 내유기용매성 등이 우수한 열가소성수지로서 film, sheet, tubular형으로 만들 수 있어 한외여과막이나 역삼투막, 기체분리막 등에 이용되고 있다. 그러나 투과속도를 높디고, fouling을 줄이기 위해서는 화학적 개질을 통해 친수성을 높이는 방법이 필요하다. 본 실험에서는 내열성과 내유기용매성이 우수한 polyetherimide계 고분자를 chlorosulfonic acid(CSA)를 이용하여 술폰화시킴으로써, 극성기의 도입에 의해 친수성이 향상된 sulfonated polyetherimide(SPEI)를 합성하였다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.49-52
• /
• 2001

The investigation of cure kinetics, morphology, and fracture toughness studies on epoxy resin/amine terminated PEI/Anhydride system were performed by differential scanning calorimetry and scanning electron microscopy. Modified autocatalystic kinetics model was applied by isothermal scan test. The fracture toughness for the neat epoxy resin was 2.15 MPa m0.5 and the fracture toughness was improved 45% as neat epoxy resin system. The generation of secondary phase of AT-PEI was observed and its size was grown up by increasing contents of PEI.

• 멤브레인
• /
• 제7권1호
• /
• pp.22-30
• /
• 1997

Porous asymmetric membranes were prepared from polyetherimide polymer by the phase-inversion technique under different conditions. The performance of the membranes was tested for the removal of acetone vapour from nitrogen. A membrane which showed a high acetone permeability and a high selectivity was chosen and tested further for the separation of different organic vapours from nitrogen. The molecular structure of organic vapours and the selectivity were correlated. A strong correlation was also found between the chromatographic retention time of the organic vapour and the selectivity. These experimental results led to the conclusion that the sorption is the factor governing the separation of volatile organic compounds from nitrogen. A membrane was also prepared by coating the surface of a porous polyetherimide membrane with silicone rubber. The performance of membranes with and without silicone rubber coating was compared.

• 한국공작기계학회논문집
• /
• 제11권6호
• /
• pp.68-74
• /
• 2002

This research covers the development of axi-symmetric plastic elements for injection molding with insert steel such as high stiffness Sabot. The functional requirements of sabot are concentricity and fracture resistance about vertical and horizontal forces. For these, an analysis of characteristics of PEI(polyetherimide) polymer is performed by standard test specimen with accordance of ASTM test guidance. Moldflow analysis and simulation of injection molding process are carried out in order not only to estimate of the warpage but also to predict the characteristics of residual stresses which both product and structure of mold may have. A new vertical side injection machine and transverse mold have been constructed. Results of the measuring concentricity and fracture test after molding of sabot are satisfied to design specification over Cp $ratio{\geq}1.33$. Finally, this technique needs more research application to others axi-symmetric elements having different radius with insert steel md structure analysis from now on.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.207-208
• /
• 2007

Recently, high performance microelectronic devices are designed in multi-layer structure in order to make dense wiring of metal conductors in compact size. Imprint lithography have received significant attention due to an alternative technology for photolithography on such devices. In this work, we synthesized dielectric composite materials based on epoxy resin, and investigated their thermal stabilities and dynamic mechanical properties for thermal imprint lithography. In order to enhance the mechanical properties and toughness of dielectric material, various modified polyetherimide(PEI) was applied in the resin system. Curing behaviours, thermal stabilities, and dynamic mechanical properties of the dielectric materials cured with various conditions were studied using dynamic differential scanning calorimetry (DSC), thermo gravimetric analysis (TGA), and Universal Test Method (INSTRON).

• 멤브레인
• /
• 제14권4호
• /
• pp.304-311
• /
• 2004

PTMSP-PEI 복합막과 PTMSP-Silica-PEI 복합막을 제조하고, 막의 특성을 FT-IR, GPC, SEM 등을 사용하여 조사하였다. PTMSP-Silica-PEI 복합막은 silica의 함량이 23∼60 wt%로 증가하면서 입자의 크기는 점차 작아지고 입자의 분포는 균일하게 되었다. PTMSP-PEI 복합막과 PTMSP-Silica-PEI 복합막에 의한 $H_2$/$N_2$ 혼합기체분리는 $25^{\circ}C$, $\Delta$P 5 psi∼30 psi 범위에서 조사되었다. PTMSP-PEI 복합막과 PTMSP-Silica-PEI 복합막들의 수소에 대한 분리인자($\alpha$, $\beta$, (equation omitted)) 값은 투과셀의 압력이 증가할수록 그리고 silica의 함량이 증가할수록 증가하였다. $25^{\circ}C$, $\Delta$P 30 psi에서 PTMSP-PEI 복합막의 수소에 대한 $\alpha$, $\beta$, (equation omitted) 값은 2.28, 1.58, 1.44이고 silica 60 wt%인 PTMSP-Silica-PEI 복합막의 수소에 대한 $\alpha$, $\beta$, (equation omitted) 값은 3.34, 1.95, 1.72 이었다.

• 멤브레인
• /
• 제22권4호
• /
• pp.251-257
• /
• 2012

n-Pentane의 분리 및 회수를 위해 분리막의 제조가 용이하고 유기용매에 대한 내용매성이 있는 polyetherimide (PEI)를 지지체로 poly (dimethyl siloxane) (PDMS)를 코팅하여 중공사 복합막을 제조하였다. 제조된 기체 분리막의 특성을 알아보기 위하여 n-Pentane과 질소를 이용하여 공급농도와 stage cut의 변화에 따른 n-pentane과 질소의 투과도, permeate, retentate의 농도, 농축도, 회수율을 측정하였다. n-pentane과 질소의 투과도는 각각 2485.3, 9.9 GPU를 나타내었고, stage cut이 감소하고 공급농도가 증가할수록 투과측의 n-pentane 농도는 증가하는 경향을 나타내었다. 반면 회수효율의 경우에는 stage cut이 증가할수록 공급농도가 감소할수록 증가하는 경향을 나타내었다.