• KSBB Journal
• /
• v.10 no.2
• /
• pp.176-182
• /
• 1995

The environmental and physiological factors affecting the production of exopolysaccharide (Methylan) and Poly-${\beta}$-hydroxybutyrate(PHB) by Methylobacterium organophilum were investigated. The maximum PHB content was obtained at $38^{\circ}C$ whereas maximum polysaccharide concentration was $3.54g/\ell$ at $30^{\circ}C$. Optimum pH was pH 7-8 for PHB production and pH 6-7 for polysaccharide production, respectively. Under the condition of $Mo^{2+}, Mg^{2+} or Mn^{2+}$ limitation with nitrogenlimitation, the PHB accumulation was increased, whereas the polysaccharide production was decreased as compared with that of solenitrogenlimitation. Under the condition of sole K+ limitation, cell growth was significantly inhibited and no polysaccharide was produced. However, the PHB content was as high as 60% of dry cell weight. Effect of C/N ratios (methanol/ammonium) in the feeding solution was examined for the simultaneous production of polysaccharide and PHB. The higher ratio of C/N showed the lower cell growth, higher content of PHB in cells, and higher yield of polysaccharide.

• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.321-324
• /
• 2001

Two recombinant Escherichia coli strains, GCSC6576 harboring a plasmid pSYL107 containing the Ralstonia eutropha polyhyclroxyalkanoate (PHA) biosynthesis genes and a fadR atoC mutant LS5218 harboring a plasmid pJC4 containing the Alcaligenes latus PHA biosynthesis genes were compared for their ability to synthesize poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB-co-3HV)] from whey as the sale carbon source. With the pH-stat fed-batch culture of E. coli LS5218, 、 ,ve obtained a cell concentration, a P(3HB-co-3HV) concentration. a P(3HB-co-3HV) content, and a 3HV fraction of 31.8 g/L, 10.6 g/L, 33.4 wt%. and 6.26 mol%, respectively at 39 h.

• Membrane Journal
• /
• v.23 no.4
• /
• pp.290-296
• /
• 2013

Poly(vinylidenefluoride-co-chlorotrifluoroethylene) P(VDF-co-CTFE) polymer was attached to methacrylic acid (MAA) in the presence of 1,8-diazabicyclo[5,4,0]undec-7-ene(DBU) catalyst to prepare P(VDF-co-CTFE)-MAA copolymer. The modified P(VDF-co-CTFE)-MAA was polymerized with 2-sulfoethyl methacrylate (SEMA) monomer in the presence of 4',4'-azobis(4-cyanovaleric acid(ACVA) initiator by free radical polymerization to form the proton conducting membrane. The ratio of the SEMA was increased in the membrane to increase the presence of the acidic group. The maximum IEC value that was observed at 50% SEMA was around 0.82 meq/g, which is consistent with the water uptake value. The highest proton conductivity achieved by P(VDF-co-CTFE)-MAA/SEMA membrane with 50% SEMA was approximately 0.041 S/cm. This indicates that the available ionic group for the proton conduction increases with the increase in the SEMA in the membrane.

• Composites Research
• /
• v.36 no.5
• /
• pp.349-354
• /
• 2023

Poly(3-hexylthiophene) (P3HT) is a conjugated polymer that is highly soluble in organic solvents and is readily available. However, its electrical properties as an active channel in electronic devices are not enough for practical applications, necessitating further improvement in the properties. In this study, we demonstrate that the blending of two P3HT polymers (i.e., regio-regular (RR) P3HT and regio-random (RRa) P3HT) with different regioregularities can significantly improve charge transport characteristics of the blend films. The morphological and electrical properties of the blend films were systematically investigated by varying the ratio between two P3HT polymers. Atomic force microscopy (AFM), X-ray diffraction (XRD), and UV-visible absorption spectroscopy (UV-vis) were employed to evaluate the morphological and optoelectronic properties of the blend films. The crystallinity of the blend films increased with increasing the content of RRa-P3HT to 20 wt% and gradually decreased as the content increased to 80%. Consistently, the highest charge carrier mobility was obtained from the blend films containing 20 wt% RRa-P3HT, which value was measured to be 0.029 cm²/V·s. The values gradually decreased to 0.0007 cm²/V·s with increasing the content of RRa-P3HT to 80 wt%.

• Korean Journal of Microbiology
• /
• v.19 no.2
• /
• pp.52-62
• /
• 1981

In order to interpret the effect of IAA on the phosphate metabolism and biosynthesis of organic compounds, Saccharomyces uvarum were cultured in the media treated with various concnetration of IAA $(10^{-3}M,\;10^{-5}M,\;10^{-7}M)$. Sampling at the beginning and intervals of culture, yeast cells fractionated were traced the contents of inorganic phosphate and organic compounds of various fractions. 1. Growth of Saccharomyces uvarum were enhanced by IAA $(10^{-3}M,\;10^{-5}M)$ and phosphate contents in DNA and RNA fractions treated with IAA were accelerated 2.3 times and 2 times in comparison with those of control. 2. Amounts of poly-P"A" and poly-p"B" were increased but poly-P"C" decreased during the culture. Therefore, it is considered that poly-P"C" play on most important role as a phosphate pool. 3. It is suggested that because phosphate contents in DNA, protein and lipid fractions increased, inorganic phosphates required phosphates required RNA were transferred from phosphates in cytoplasm, because these increased slowly during the culture. 4. Alkali-labile protein were accelerated by IAA and alkali stable protein only were inhibiction were enhanced by IAA while, ethanol : ether soluble fraction was induced by $10^{-7}M$ IAA in comparison with those control.X> IAA in comparison with those control.

• Polymer(Korea)
• /
• v.26 no.2
• /
• pp.245-252
• /
• 2002

Thermodynamics and gas transport properties of polymethylmethacrylate (PMMA) blends with polyvinylmethylether (PVME) containing various amount of poly (styrene-b-methylmethacrylate) copolymer (P(S-b-MMA)) as a compatibilizer were studied. To extract interaction energies of binary pairs involved in the blends from the phase separation temperatures using an equation-of-state theory, PVME blends with methylmethacrylate copolymers containing various amount of styrene (SMMA) were prepared. PVME formed miscible blends with methylmethacrylate copolymers containing more than 70 wt% styrene and these miscible blonds showed a LCST-type phase separation behavior. Based on the interaction information obtained here, P(S-b-MMA) copolymer was added to the PMMA/PVME blends to enhance their compatibility. The average diameter of the dispersed rubber particles was gradually decreased for the blends of containing P(S-b-MMA) from 0 to 5 phr and then leveled off at a fixed size. At a fixed bland composition, the gas permeation was also increased as the P(S-b-MMA) content increased from 0 to 5 phr and then leveled off when the P(S-b-MMA) content was higher than 5 phr.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.7
• /
• pp.1224-1229
• /
• 2004

The blend films of poly(3-hydroxybutyric acid) (PHB) with chitosan were prepared and water vapor transmission rate, oxygen permeability and lipid permeability of the PHB/chitosan films were measured. Additionally, the biodegradability of the PHB/chitosan films was also evaluated. Water vapor transmission rate and oxygen permeability of the films decreased by the addition of chitosan. The addition of polyethylene glycol (PEG, plasticizer), however, increased the water vapor transmission rate and oxygen permeability of the films. In the evaluation of lipid permeability, all the films except PHB (the film made of only PHB) and PHB-P (the film made of PHB and PEG) did not permeate beef tallow for 24 hours. The consumed oxygen for PHB/chitosan films during incubation was greater than that for the control on the biodegradability determination of the films, which implies that PHB/chitosan films were degraded by the microorganisms. The higher PHB ratio of the films was, the faster biodegradation of the films occurred.

• Polymer(Korea)
• /
• v.25 no.2
• /
• pp.186-198
• /
• 2001

pH/Thermal sensitive copolymers with the various acidic comonomer compositions composed of N-isopropylacrylamide (NIPAAm) with acrylic acid (AAc), 2-acrylamido glycolic acid (AAmGAc), and 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS) were synthesized by free radial polymerization. In this study, to characterize the effect of different acidic comonomer composition and pH on the lower critical solution temperature (LCST) behaviors of their copolymers. phase transition experiments were performed with a thermo-optical analyzer (TOA). The phase transition temperature (T$^{p}$ ) of aqueous poly(NIPAAm-co-AAc) solution was lowered with increasing the ionization of the acid group in AAc, that is, the ionized state induced the electrostatic repulsion of ionized groups. In contrast, when AAmGAc was introduced into PNIPAAm, T$^{p}$ was little changed at pH 1-3, whereas climbed up significantly from pH 1 to pH 3. In the range of pH 6-10, Tp was lower than that of pH 3-5. This result was considered to be \"Ionic Screen Effect\" and this effect had been also observed in the case of poly(NIPAAm-co-AMPS).-co-AMPS).

• Polymer(Korea)
• /
• v.30 no.5
• /
• pp.412-416
• /
• 2006

The superparamagnetic nanoparticles were prepared by coprecipitation of $FeCl_3$ and $Na_2SO_3$ with $NH_4OH$ and the surface charge on hydroxyl group by chemisorption was changed depending on pH. We studied correlation between surface charge of magnetite and pH. Using this correlation the properties of poly (acrylic acid) (PAAc) hydrogel embedded with magnetite was studied. The magnetite was characterized by XRD, AFM. and FTIR. The zeta-potential of magnetite was influenced by pH: great positive charge was shown high under the pH 4 and isoelectric point was found at pH 7. The hydrogen bond formed by combining oi PAAc hydrogel and magnetic colloid under pH 4 caused tensile strength to increase, while swelling and elongation at break to decrease. The result confirmed that the magnetic moment was increased proportionally to the content of magnetite.

• Membrane Journal
• /
• v.14 no.4
• /
• pp.304-311
• /
• 2004

The poly(1-trimethylsilyl-1-propyne) (PTMSP) and silica-filled PTMSP membranes were prepared by casting from a toluene solution on porous polyetherimide (PEI). FT-IR spectrum, GPC and SEM pictures have been taken to characterize the membranes. The particle size of membrane decreases as silica content of the membrane increases from 23 to 60 wt%, and a uniform distribution of the silica is observed. The separation properties of the gas mixture (32 mol% $H_2$/ 68 mol% $N_2$) through the composite membranes were studies as a function of pressure and percentage of silica. Selectivity values of $H_2$/$N_2$ increased as the pressure of permeation cell and silica content of the membrane increased. The real separation factor($\alpha$), head separation factor($\beta$), and tail separation factor((equation omitted)) of PTMSP-PEI composite membrane were 2.28, 1.58, and 1.44 respectively at $\Delta$P 30 psi and $25^{\circ}C$. $\alpha$, $\beta$, and (equation omitted) of PTMSP-Silica-PEI composite membrane for 60 wt% silica were 3.34, 1.95, 1.72 at $\Delta$P 30 psi and $25^{\circ}C$.