• 오토저널
• /
• 제11권6호
• /
• pp.24-27
• /
• 1989

MTBE(Methyl Tertiary Butyl Ether)는 PMMA(Poly Methyl Methacrylate)를 생산하기 위한 석유화학 중간원료로 사용되는 것이 일반적이나, 무연휘발유 사용의 세계적인 추세에 힘입어 (정유산업에 있어서 그 수요가 날로 증가하고 있으며) 정유산업의 옥탄가 문제를 해결해 주는 유효적절한 수단으로 보급이 확대되고 있는 실정이다. 여기에서는 MTBE의 전반적인 특성 및 사용에 따른 효과 및 장단점을 소개하고자 한다.

• 폴리머
• /
• 제39권2호
• /
• pp.191-199
• /
• 2015

대표적인 범용 플라스틱인 폴리스티렌의 장점인 투명성을 유지하면서 단점인 낮은 내충격성을 보완하고자 투명한 아크릴레이트계 고분자의 단량체인 butyl acrylate(BA)와 methyl methacrylate(MMA)를 styrene(SM) 단량체와 현탁중합으로 중합하여 3원 공중합체를 제조하였다. SM/BA 2원 공중합체와 SM/BA/MMA 3원 공중합체를 제조하여 각각의 물성을 비교하였다. 또한 가장 충격강도가 좋은 3원 공중합체에 가교제인 dicumyl peroxide(DCP)의 함량을 변화시키면서 가교반응시켰다. 단량체의 중합조성비 및 가교제의 함량이 공중합체의 열적, 기계적 물성과 광학적 특성에 미치는 영향에 대해 확인하였다. 결론적으로 butyl acrylate의 함량이 증가할수록 충격강도는 높아지지만 SM/BA 2원 공중합체는 특정 조성에서 불투명하게 된다. 하지만, SM/BA/MMA 3원 공중합체는 모든 조성에서 투명하면서 비교적 높은 기계적 물성을 나타내었다. 또한 DCP의 함량이 증가할수록 기계적 물성을 높일 수 있었으나 투명성은 점차 낮아졌다.

• 센서학회지
• /
• 제7권2호
• /
• pp.97-102
• /
• 1998

PPV(poly(p-phenylenevinylene))를 발광체로 이용한 유기 박막 EL 소자를 다양한 구조와 조건으로 제작하였으며, 그 전기-광학적 특성을 평가하였다. 제작된 EL 소자는 단층구조(ITO(indium tin oxide)PPV/Mg), 이층구조 (ITO/PVK(poly(N-vinylcarbazole))/PPV)Mg와 ITO/PPV/Polymer matrix+PBD/Mg) 그리고 삼층구조 (ITO/PVK/PPV/PS(polystyrene)+PBD(butyl-2-(4-biphenyl)-5-(4-tert-butylphenyl-1,3,4-oxadiazole))/Mg)를 가지며, 그들의 전기광학적 특성을 상호 비교하였다. 이층구조(ITO/PPV)Polymer matrix+PBD/Mg)에서는 PMMA (poly(methyl methacrylate)), PC(polycarbonate) PS 와 MCH(side chain liquid crystalline homopolymer)를 고분자 메트릭스로 사용하였으며, 특히, PS 고분자 메트 릭스를 전자수송층으로 사용하는 경우에 전자수송제인 PBD의 농도에 따른 발광휘도 특성을 구하였다. 제작된 소자의 인가전압에 따른 전류, 휘도특성을 분석한 결과 터널링효과를 나타내었고 안정된 발광특성을 가진다는 것을 알 수 있었다.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.289-289
• /
• 2006

The carboxylated MWNTs were successfully prepared by conventional acid treatment, and their structures were confirmed by FT-IR, Raman and TEM analysis. The water-dispersibility of the surface modified WNTs were good. The COOH-MWNT will show better stability during the emulsion polymerization as compared with Pristine MWNT. In-situ emulsion polymerizations of methyl methacrylate N(MMA) and n-butyl acrylate (BA) were carried out. Aggregate size and dispersion stability of the CNTs in water phase were measured using dynamic light scattering, turbidity, UV-visible spectrophotometer, and electron microscope. In addition, thermo-mechanical properties of MWNT/polymer nanocomposites were investigated.

• Macromolecular Research
• /
• 제15권7호
• /
• pp.656-661
• /
• 2007

The effects of a neutral solvent of dioctyl phthalate (DOP) on the phase behavior of symmetric polystyrene-block-poly(n-butyl methacrylate) copolymers (PS-b-PnBMA) were assessed herein. Closed-loop phase behavior with a lower disorder-to-order transition (LDOT) and an upper order-to-disorder transition (UODT) was observed for PS-b-PnBMA/DOP solution when the quantity of DOP was carefully controlled. When the molecular weight of PS-b-PnBMA became larger, the LDOT did not appreciably change at smaller quantities of DOP. With larger quantities of DOP, the reduction in the UODT is greater than the increase in the LDOT. This behavior is discussed in accordance with a molecular theory predicated on a compressible random-phase approximation.

• Macromolecular Research
• /
• 제11권3호
• /
• pp.163-171
• /
• 2003

For the pervaporation of water-ethanol mixtures, new composite membranes having poly(acrylic acid)-poly (butyl methacrylate-co-methyl methacrylate) interpenetrati ng polymer network [PAA-P(BMA-co-MMA) IPN] skin layer supported on porous and crosslinked poly(BMA-co-MMA) were prepared. The morphology of the sub-layer of the composite membrane prepared in the presence of 60 wt% solvent showed cellular structure, on the other hand that of sublayer prepared in the presence of 70 wt% solvent presented very porous interconnected pore structure with macrovoids. Permeation rates of the composite membranes were largely influenced by the morphology of the sublayer. Separation factors increased with the increase of the degree of crosslinking of the PAA network. It was found that permeation rates could be increased by introducing anionic charges on carboxyl groups of the PAA. The permeation rate changes of the PAA-P(BMA-co-MMA) IPN composite membranes according to the feed compositions showed quite similar pattern with the swelling behavior in water-ethanol mixtures.

• Bulletin of the Korean Chemical Society
• /
• 제16권10호
• /
• pp.972-976
• /
• 1995

A trace amount of 4-biphenylcarboxylate having a pre-twisted biphenyl moiety was attached to a poly(methyl methacrylate) side chain and the fluorescence properties of the chromophore were investigated in various solvents such as ethyl acetate and butyl chloride. At room temperature, the polymer exhibited a distinct red shift of the short wavelength emission (325 nm) and an enhanced emission intensity around 430 nm upon excitation at the absorption red edge. The temperature dependence of the intensity ratio (R) of the 325 nm emission to the 430 nm emission was observed when exciting at the red edge over the temperature range between -20 and 60 ℃. However, the temperature dependence was not observed when exciting at the shorter wavelength. The Arrhenius plot of the R value shows the activation energy of 6.0 kJ/mol which is in good agreement with the energy required for the twist of the biphenyl moiety. Together with the results of red edge excitation effects it was concluded that the pre-twisted geometry of the biphenyl moiety is preserved by the restriction of the polymer chain to facilitate the formation of the twisted intramolecular charge transfer (TICT) state upon excitation.

• 폴리머
• /
• 제33권6호
• /
• pp.602-607
• /
• 2009

심혈관용 소재로서 혈관내피전구세포의 포획을 통해 in vivo 내피세포화가 가능한 표면을 가진 폴리우레탄 표면을 개발하였다. 혈관내피전구세포의 점착을 유도하는 CD34 단일클론항체(monoclonal antibody, mAb)를 표면에 도입하기 위해, poly (poly (ethylene glycol) acrylate-co-butyl methacrylate), poly (PEGA-co-BMA) 공중합체가 합성되었고, 이를 폴리우레탄 표면에 코팅하여 CD34 단일클론항체를 화학적으로 고정화하였다. 중합된 공중합체의 $^1H$-NMR 분석은 원하는 조성을 가진 poly(PEGA-co-BMA)의 합성이 가능함을 확인해 주었다. 이전 연구에서 개발된 PEG가 그래프트된 폴리우레탄과의 비교를 통해, 본 연구에서 제조된 poly(PEGA-co-BMA)가 코팅된 폴리우레탄 표면이 CD34 mAb의 고정화에 더 효과적인 것으로 나타났으며, 이는 CD34 mAb의 표면밀도와 활성도가 32배 이상 증가된 결과를 통해 증명되었다. 개질된 폴리우레탄 표면의 물리화학적 특성은 XPS와 물 접촉각, AFM에 의해 분석되었으며, 각각의 개질된 표면에 따른 표면의 특이적 성질을 잘 보여주었다. 본 연구에서 얻어진 결과들은 poly(PEGA-co-BMA)의 코팅을 통해 제조된 표면이 CD34 mAb의 고정화에 효과적임을 설명하였으며, 실제로 심혈관용 소재의 개발에 적용 가능성이 크다는 것을 증명해 주었다.

• Biomaterials and Biomechanics in Bioengineering
• /
• 제1권3호
• /
• pp.163-174
• /
• 2014

The objective of this study is to prepare an artificial extracellular matrix (ECM) for cell culture by using polymer hydrogels. The polymer used is a cytocompatible water-soluble phospholipid polymer: poly[2-methacryloyloxyethyl phosphorylcholine (MPC)-n-butyl methacrylate-p-nitrophenyloxycarbonyl poly(ethylene oxide) methacrylate (MEONP)] (PMBN). The hydrogels are prepared using a cross-linking reaction between PMBN and diamine compounds, which can easily react to the MEONP moiety under mild conditions. The most favorable diamine is the bis(3-aminopropyl) poly(ethylene oxide) (APEO). The effects of cross-linking density and the chemical structure of cross-linking molecules on the mechanical properties of the hydrogel are evaluated. The storage modulus of the hydrogel is tailored by tuning the PMBN concentration and the MEONP/amino group ratio. The porous structure of the hydrogel networks depends not only on these parameters but also on the reaction temperature. We prepare a hydrogel with $40-50{\mu}m$ diameter pores and more than 90 wt% swelling. The permeation of proteins through the hydrogel increases dramatically with an increase in pore size. To induce cell adhesion, the cell-attaching oligopeptide, RGDS, is immobilized onto the hydrogel using MEONP residue. Bovine pulmonary artery endothelial cells (BPAECs) are cultured on the hydrogel matrix and are able to migrate into the artificial matrix. Hence, the RGDS-modified PMBN hydrogel matrix with cross-linked APEO functions as an artificial ECM for growing cells for applications in tissue engineering.

• 한국전기전자재료학회논문지
• /
• 제18권6호
• /
• pp.499-505
• /
• 2005

We compared the effects of a representative aromatic acid amplifier, 2-hydroxy-2'-tosylory biphenyl, doped in poly(tort-butyl methacrylate) (PTBMA), poly (tetrahydropyranylmethacrylate) (pTHPMh) or poly[tert-butoxycarbonyloxystyrene) (pTBOCST) resin film as acid labile polymer in view of thermal stability and photosensitivity enhancement. The acid amplifier was stable up to 60 min in pTBMA and pTBOCST film and up to 10 min in pTHPMA film at $120^{\circ}C$. pTBMA and pTHPMA film doped with the acid amplifier showed 9 times and 3 times higher photosensitivity, respectively. But pTBOCST film showed a negligible photosensitivity enhancement. Photosensitivity enhancement and thermal stability of the acid amplifier were found to be affected by the resin.