• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.437-440
• /
• 2008

In recent years, pollution load calculation has become a topic for research that resulted in the development of numerous GIS modeling methods. The existing pollution method for nonpoint source (NPS) can not be indentified and calculated the amount of the pollution precisely. This research shows that the association of typical pollutant concentrations with land uses in a watershed can provide a reasonably accurate characterization of nonpoint source pollution in the watershed using Expected Mean Concentrations (EMC). The GIS based pollution assessment method is performed for three pollutant constituents: BOD, TN, and TP. First, the runoff grid by means of the precipitation grid and runoff coefficient is estimated. Then, the NPS pollution loads are calculated by grid based method. Finally, the final outputs are evaluated by statistical technique. The results illustrate the merits of the approach. This model verified that GIS based method of estimating spatially distributed NPS pollution loads can lead to more accurate representation of the real world.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.12
• /
• pp.21-26
• /
• 2011

This is a study to establish regulations against light pollution for lighting on roads. Many kinds of light pollution by luminaire on roads was calculated and analyzed by applying the classification method of luminaires(Cut-off classification of IDA-IESNA, BUG Rating Classification) and the calculation method of Upward Lighting Ratio of CIE among measures to prevent light pollution that international lighting organizations suggest. As a result of the analysis, it was found that the regulation by Cutoff of IESNA and ULR classification of CIE could be one for scattered light of light pollution compared to BUG classification but is not sufficient for the regulation of light tresspass or glare. BUG classification by each lighting zone was suggested as threshold value of the light pollution regulation considering domestic conditions.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.6
• /
• pp.1-7
• /
• 2010

Outdoor lighting have been controlled by laws and regulations instituted in accordance with each country's situations because lights are also considered as one of pollutions at the view of environmental pollutions and energy saving. Thus, in this paper, we suggest the calculation method and regulations of light pollution suitable for domestic by comparing and analyzing various types of road lighting luminaires based on the calculation method of light pollution accepted internationally.

• Journal of Korean Society on Water Environment
• /
• v.33 no.1
• /
• pp.70-77
• /
• 2017

Total Pollution Load Control (TPLC) is a system for managing the discharge load assigned by satisfying the Target Water Quality (TWQ) in Standard Flow Conditions (SFC). TWQ for a between Metropolitan Cities/Dos Specified (Cites/Dos TWQ) is very important to be the basis of each Unit Watershed TWQ. The purpose of this study was to establish a rational and scientific 'Calculation Metohd of Cites/Dos TWQ'. A methodology for the 3rd phase 'Cites/Dos TWQ' was proposed in this study based on review of the past phase (1rd and 2rd) 'Cites/Dos TWQ' in nakdong river. And utilized water quality model to estimate 3rd phase 'Cites/Dos TWQ' The allocation method of individual discharge sources are important for estimating 'Cites/Dos TWQ' In this case, the key point of the method of calculating the total allowable individual sources is the balance of the equity and the efficiency between individual sources of reduced pollutants. Thus, water quality shall be determined with regard to the current emission levels, the reduction capacity and the technical possibilities of individual sources. We estimate 3rd phase 'Cites/Dos TWQ' according to the 'Calculation Method of Cites/Dos TWQ'.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.7
• /
• pp.2377-2398
• /
• 2021

In the recent modernized world, utilization of natural resources (renewable & non-renewable) is increasing drastically due to the sophisticated life style of the people. The over-consumption of non-renewable resources causes pollution which leads to global warming. Consequently, government agencies have been taking several initiatives to control the over-consumption of non-renewable natural resources and encourage the production of renewable energy resources. In this regard, we introduce an IoT powered integrated framework called as green home architecture (GHA) for green score calculation based on the usage of natural resources for household purpose. Green score is a credit point (i.e.,10 pts) of a family which can be calculated once in a month based on the utilization of energy, production of renewable energy and pollution caused. The green score can be improved by reducing the consumption of energy, generation of renewable energy and preventing the pollution. The main objective of GHA is to monitor the day-to-day usage of resources and calculate the green score using the proposed green score algorithm. This algorithm gives positive credits for economic consumption of resources and production of renewable energy and also it gives negative credits for pollution caused. Here, we recommend a green score based tax calculation system which gives tax exemption based on the green score value. This direct beneficiary model will appreciate and encourage the citizens to consume fewer natural resources and prevent pollution. Rather than simply giving subsidy, this proposed system allows monitoring the subsidy scheme periodically and encourages the proper working system with tax exemption rewards. Also, our GHA will be used to monitor all the household appliances, vehicles, wind mills, electricity meter, water re-treatment plant, pollution level to read the consumption/production in appropriate units by using the suitable sensors. These values will be stored in mass storage platform like cloud for the calculation of green score and also employed for billing purpose by the government agencies. This integrated platform can replace the manual billing and directly benefits the government.

• Journal of Climate Change Research
• /
• v.7 no.3
• /
• pp.289-297
• /
• 2016

In this study, we researched the emission source category and it was calculated emissions estimates from existing research or literature review related to port. In addition, we have created the basis for a policy that can reduce greenhouse gas emissions calculation based on the results of the harbor. Greenhouse gas emissions estimation results, we proposed a method for allocating the GIS space. In this study, we confirmed based on the calculated greenhouse gas emissions by sources resulting in the GIS Map Port result of the expression construct for space allocation. Based on these results, it tries to provide the basic data that can be used when you want to create a local government measures to reduce scenario in the future.

• Journal of the Korean Applied Science and Technology
• /
• v.39 no.4
• /
• pp.535-541
• /
• 2022

The radical reaction position was calculated by varying the calculation level for ACEL and ANT, which are detected with the highest frequency and concentration in PAHs pollution sites. The results of each calculation level were compared and evaluated with the existing literature. HF, B3LYP, B3LYP-D, and MP2 were used as the method for each level used for calculation. Except for HF, the MK charge by B3LYP, B3LYP-D, and MP2 was consistent with the experimental results. It was found that the dispersion effect was negligible in the calculation of ACEL and ANT because the calculation results by the B3LYP and B3LYP-D methods were the same. In particular, it was found that the MK charge calculation result by MP2 agrees well with the product/PAH ratio obtained as a result of the experiment. Considering the calculation cost, it would be preferable to use B3LYP to predict the radical reaction site of ACEL and ANT. However, considering the product/PAH ratio, it takes more time to calculate, but it is judged that it is better to use the MP2.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.44 no.5
• /
• pp.96-105
• /
• 2002

As an useful water purification system for non-point source pollution in rural watersheds, interests in constructed wetlands are growing at home and abroad. It is well known that constructed wetlands are easily installed, no special managemental needs, and more flexible at fluctuating influent loads. They have a capacity for purification against nutrient materials such as phosphorus and nitrogen causing eutrophication of lentic water bodies. The Constructed Wetland Design Model (CWDM), developed through this study is consisted mainly of Database System, Runoff-discharge Prediction Submodel, Water Quality Prediction Submodel, and Area Assessment Submodel. The Database System includes data of watershed, discharge, water quality, pollution source, and design factors for the constructed wetland. It supplies data when predicting water quality and calculating the required areas of constructed wetlands. For the assessment of design flow, the GWLF (Generalized Watershed Loading Function) is used, and for water quality prediction in streams estimating influent pollutant load, Water Quality Prediction Submodel, that is a submodel of DSS-WQMRA model developed by previous works is amended. The calculation of the required areas of constructed wetlands is achieved using effluent target concentrations and area calculation equations that developed from the monitoring results in the United States. The CWDM is applied to Bokha watershed to appraise its application by assessing design flow and predicting water quality. Its application is performed through two calculations: one is to achieve each target effluent concentrations of BOD, SS, T-N and T-P, the other is to achieve overall target effluent concentrations. To prove the validity of the model, a comparison of unit removal rates between the calculated one from this study and the monitoring result from existing wetlands in Korea, Japan and United States was made. As a result, the CWDM could be very useful design tool for the constructed wetland in rural watersheds and for the non-point source pollution management.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2005.11a
• /
• pp.91-92
• /
• 2005

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2004.05a
• /
• pp.117-118
• /
• 2004