• 제목/요약/키워드: pollutant removal efficiency

검색결과 208건 처리시간 0.029초

Preparation of $TiO_2$-Coated Polypropylene Beads by PCVD Process for Phenol Removal

  • Pham, Hung-Cuong;Kim, Dong-Joo;Kim, Kyo-Seon
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2009년도 추계학술대회 초록집
    • /
    • pp.185-185
    • /
    • 2009
  • Polypropylene beads (PP) coated with $TiO_2$ thin films were prepared by a rotating cylindrical plasma chemical vapor deposition (PCVD) reactor and were used to remove phenol in aqueous solution. The $TiO_2$ thin films of 416 nm thickness were coated on the PP particles uniformly. As the number of $TiO_2$-coated PP beads increases, the phenol is degraded faster, because of larger total surface area of photocatalysts for photodegradation. This study shows that a rotating cylindrical PCVD reactor can be a good method to prepare the particles coated with high-quality $TiO_2$ thin films, which can be applied to the pollutant removal by a photodegradation reaction of $TiO_2$ with high efficiency.

  • PDF

침투도랑 유지관리를 통한 도시 강우유출수 처리 성능 평가 (Performance assessment of an urban stormwater infiltration trench considering facility maintenance)

  • 나쉬 제트 레예스;프란츠 케빈 헤로니모;최혜선;김이형
    • 한국습지학회지
    • /
    • 제20권4호
    • /
    • pp.424-431
    • /
    • 2018
  • 강우유출수 내 포함된 입자상 물질, 유기물, 영양물질, 중금속 등의 오염물질은 수계에 악영향을 미친다. 이러한 강우유출수 내 포함된 오염물질 감소와 처리를 위해 최적관리기법(BMP)을 도입하고 있으며, 비용효율적인 방법으로 평가되고 있다. 하지만, 잘못된 설계와 유지관리 부족은 시설의 성능을 저하시켜 원활한 기능을 수행하지 못하고 있는 실정이다. 따라서, 본 연구에서는 지속적인 유지관리가 진행된 침투도랑(IT)의 시설에 대한 평가를 수행하였다. 2009년부터 2016년까지 총 41회의 모니터링을 수행하였으며 침투도랑(IT)의 오염물질 저감효율 평가를 수행하였다. 수질 및 수문학적 분석결과, 시설에 유입되는 유입수는 단위 오염 부하량에 영향을 미치는 요인으로 나타났다. 또한, 계절의 변화는 오염물질 저감능력에 영향을 미치는 것으로 분석되었다. 여름철 강수량 및 강우강도의 증가로 인해 Overflow 및 유량의 증가가 발생되었으며, 이로 인해 저감효율이 감소하였다. 또한, 겨울철 낮은 온도로 인해 여재 및 화학적 메카니즘의 효과 감소로 오염물질 저감 효율이 감소되는 것으로 분석되었다. 침투도랑(IT)의 유지관리는 시설의 효율에 영향을 미치는 것으로 평가되었다. 시설 설치 이후 2년 동안 유지관리 부족으로 오염물질 저감효율이 낮은 것으로 나타났으며, 일부 모니터링에서 지오텍스타일 내 제거 되지 않은 퇴적물로 인해 오염물질 저감효율의 감소를 보였다. 본 연구를 통하여, 시설의 유지관리는 오염물질 저감효과에 영향을 미치는 것으로 나타났으며, BMP 시설의 최적 유지관리 기간 및 방법 등은 향후 유용한 자료로 사용 될 수 있을 것으로 사료된다.

습식 공기청정장치의 공기오염물질 제거 특성 (Characteristics of a Wet Air Cleaning System for Removal of Air Pollutants)

  • 배귀남;김용표;백남준
    • 대한환경공학회지
    • /
    • 제22권1호
    • /
    • pp.21-31
    • /
    • 2000
  • 본 연구에서는 공기청정기, 기수분리기 및 중성능 필터로 구성되는 습식 공기청정장치를 대상으로 입자와 유해가스인 $SO_2$, NO, $NO_2$, HCHO 및 $NH_3$의 제거 특성을 실험적으로 살펴보고, 실험결과를 대상물질의 물리화학적 특성과 연관시켜 검토하였다. 입자제거 실험에서는 대기 에어로졸을 송풍기를 통해 장치에 도입하여 장치의 3곳에서 2대의 레이저 입자계수기로 입자크기 분포를 측정하여 각 구성요소의 입자제거효율을 구하였다. 실험결과로부터 기수분리기에서는 입경이 $5{\mu}m$ 이상인 조대 입자가 주로 제거되고. 중성능 필터에서는 이보다 작은 미세 입자가 주로 제거됨을 알 수 있었다. 유해가스 제거 실험에서는 시험용 가스를 송풍기의 출구에 주입하여 공기청정기의 상류와 기수분리기의 하류에서 가스농도를 측정하여 유해가스 제거효율을 구하였다. 실험결과로부터 헨리상수가 큰 수용성인 $SO_2$, HCHO 및 $NH_3$는 제거효율이 높았으나, 헨리상수가 낮아 난용성인 NO와 $NO_2$는 제거효율이 낮음을 알 수 있었으며, 공기청정기에서 상당량의 음이온이 발생됨을 알았다.

  • PDF

PDMS (Polydimethylsilioxane)-Coated Silica Nanoparticles for Selective Removal of Oil and Organic Compound from Water

  • Cho, Youn Kyoung;Kim, Dae Han;Yoon, Hye Soo;Jeong, Bora;Kim, Young Dok
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
    • /
    • pp.257-257
    • /
    • 2013
  • In order to selectively remove oil and organic compound from water, silica nanoparticles with hydrophobic coating was used. Since silica nanoparticles are generally hydrophilic, removal efficiency of oil and organic compound, such as toluene, in water can be decreased due to competitive adsorption with water. In order to increase the removal efficiency of oil and toluene, hydrophobic polydimethylsiloxane (PDMS) was coated on silica nanoparticles in the form of thin film. Hydrophobic property of the PDMS-coated silica nanoparticles and hydrophilic silica nanoparticles were easily confirmed by putting it in the water, hydrophilic particle sinks but hydrophobic particle floats. PDMS coated silica nanoparticles were dispersed on a slide glass with epoxy glue on and the water contact angle on the surface was determined to be over $150^{\circ}$, which is called superhydrophobic. FT-IR spectroscopy was used to check the functional group on silica nanoparticle surface before and after PDMS coating. Then, PDMS coated silica nanoparticles were used to selectively remove oil and toluene from water, respectively. It was demonstrated that PDMS coated nanoaprticles selectively aggregates with oil and toluene in the water and floats in the form of gel and this gel remained floating over 7 days. Furthermore, column filled with hydrophobic PDMS coated silica nanoparticles and hydrophilic porous silica was prepared and tested for simultaneous removal of water-soluble and organic pollutant from water. PDMS coated silica nanoparticles have strong resistibility for water and has affinity for oil and organic compound removal. Therefore PDMS-coated silica nanoparticles can be applied in separating oil or organic solvents from water.

  • PDF

극저농도 NDMA(N-nitrosodimethylamine) 물리적/생물학적 처리 효율 비교 평가 (Evaluation and Comparative Physical/Biological Removal Performance for Extremely Low-Concentration NDMA(N-nitrosodimethylamine))

  • 박세용;김희주;김문일
    • 한국지반환경공학회 논문집
    • /
    • 제12권2호
    • /
    • pp.55-61
    • /
    • 2011
  • NDMA(N-Nitrosodimethylamine)는 극저농도(10ng/L)에서도 암을 일으킬 수 있는 물질로 알려져 있지만, 기존의 NDMA 제거율 평가 연구는 고농도의 NDMA를 대상으로 한 것이 대부분이었다. 따라서 극저농도의 NDMA 제거효율 평가가 필요하며 그 기초연구로써 호기성/혐기성 조건에서의 분말활성탄, GS(Granular Sludge), MF(Microfiltration), UF(Ultrafiltration)를 이용한 제거효율과 Silica gel(MCM-41, Diatomite, Spherical silica gel)을 이용한 제거효율을 평가하였다. 그 결과 혐기성 조건에서 GS, PAC를 접촉한 후 UF membrane을 이용한 고액분리가 65%의 제거율로 가장 높았으며, Silica gel(MCM-41)이 6%의 제거율로 가장 낮았다. 본 연구는 극저농도의 NDMA 제거의 기초 연구로서 향후 관련 연구의 기초자료로써 활용을 기대한다.

저영향개발기법 설계 및 평가를 위한 LIDMOD3 개발 (LIDMOD3 Development for Design and Evaluation of Low Impact Development)

  • 전지홍;서성철
    • 한국물환경학회지
    • /
    • 제34권4호
    • /
    • pp.382-390
    • /
    • 2018
  • In this study, the LIDMOD3 was developed to design and evaluate low impact development (LIDMOD). In the same fashion, the LIDMOD3 employs a curve number (NRCS-CN) method to estimate the surface runoff, infiltration and event mean concentration as applicable to pollutant loads which are based on a daily time step. In these terms, the LIDMOD3 can consider a hydrologic soil group for each land use type LID-BMP, and the applied removal efficiency of the surface runoff and pollutant loads by virtue of the stored capacity, which was calculated by analyzing the recorded water balance. As a result of Model development, the LIDMOD3 is based on an Excel spread sheet and consists of 8 sheets of information data, including: General information, Annual precipitation, Land use, Drainage area, LID-BMPs, Cals-cap, Parameters, and the Results. In addition, the LIDMOD3 can estimate the annual hydrology and annual pollutant loads including surface runoff and infiltration, the LID efficiency of the estimated surface runoff for a design rainfall event, and an analysis of the peak flow and time to peak using a unit hydrolograph for pre-development, post-development without LID, and as calculated with LID. As a result of the model application as applied to an apartment, the LIDMOD3 can estimate LID-BMPs considering a well spatical distributed hydroloic soil group as realized on land use and with the LID-BMPs. Essentially, the LIDMOD3 is a screen level and simple model which is easy to use because it is an Excel based model, as are most parameters in the database. This system can be expected to be widely used at the LID site to collect data within various programmable model parameters for the processing of a detail LID model simulation.

충남지역 마을하수의 발생 및 처리현황 (Generation and Current Treatment Status of Sewage at the Rural Village in Chungnam Province)

  • 강방훈;김진호;최철만
    • 한국환경농학회지
    • /
    • 제27권1호
    • /
    • pp.44-49
    • /
    • 2008
  • 본 연구는 농촌마을에서 발생하는 마을하수의 수질현황과 마을하수 처리시설에 대한 관리 현황 및 정확한 실태를 파악하고 처리효율을 조사하여 마을하수의 효율적인 관리방안을 모색하며, 농촌마을 하수정비 사업과 농촌지역 하수정책 수립의 활용에 대한 기초자료로서 제공하고자 실시하였는데, 그 결과는 다음과 같다. 1. 마을하수 처리시설에 대한 각 지역별 유입수 수질 분석 결과, 아산시 지역에서의 유입수 BOD와 COD의 평균 농도는 각각 29.0 mg/L와 19.1 mg/L였고, 부여군 지역은 BOD 16.7 mg/L, COD 16.3 mg/L, 공주시 지역은 BOD 18.8 mg/L, COD 15.3 mg/L로 조사되어 아산시 지역에서 유입수의 농도가 가장 높았으나 일반적인 도시하수의 유입수 농도에 비해 매우 낮게 조사되었다. 2. 오염부하량별 원단위는 BOD $3.3{\sim}4.9$ gpcd, COD $3.2{\sim}11.3$ gpcd, T-N $1.5{\sim}4.6$ gpcd, T-P $0.3{\sim}0.5$ gpcd 로 조사되어 도시하수의 오염부하량 원단위 결과보다는 상당히 낮게 조사되었다. 3. 마을하수 처리시설의 처리공법별 제거효율은 고효율 합병정화조와 토양피복형 접촉산화법에서는 특히 BOD와 SS의 제거효율이 높았으며, 접촉산화법의 경우는 다른 처리공법에 비해 조금 낮게 조사되었다.

여재 특성에 따른 강우 유출수 내 오염물질 제거특성 평가 (Evaluation of the Removal Characteristics of Pollutants in Storm Runoff Depending on the Media Properties)

  • 김태균;조강우;송경근;윤민혁;안규홍;홍승관
    • 대한환경공학회지
    • /
    • 제31권7호
    • /
    • pp.483-490
    • /
    • 2009
  • 본 연구의 목적은 도시지역 강우유출수 내에 존재하는 다양한 오염물질에 대한 여과장치의 제거 효율을 평가하고 여재의 특성에 따른 설계인자를 도출하는데 있다. 비점오염물질 제어기술로서 여과 장치 내에 충전될 여재의 선정은 여과장치의 수명과 크기를 결정하는 중요한 요소이다. 본 연구에서는 컬럼운전을 수행함으로써 펄라이트와 합성여재의 강우유출수 내에 존재하는 오염물질에 대한 제거능을 조사하였다. 각 여재의 양이온교환능력 (CEC) 및 제타전위 등 여재의 표면특성을 분석한 결과 펄라이트가 양 이온계 오염물질의 흡착에 있어서는 더 우수한 것으로 나타났다. 또한 컬럼 운전 수행 결과 입자성 오염물질인 $TCOD_{Cr}$와 탁도는 초기 2.5분의 접촉시간만 가지고도 대부분의 제거가 가능한 것을 확인할 수 있었다. 한편 수리학적 특성에 있어 EBCT (empty bed contact time) 2.5분의 시점에서 살펴보았을 때 폐색이 발생한 시점은 펄라이트는 630분, 합성여재에서는 810분으로 동일 조건에서 합성여재의 운전 수명이 더 긴 것으로 나타났다. 용존성 오염물질인 $SCOD_{Cr}$에 대하여서는 두 여재 모두 뚜렷한 제거 특성이 보이지 않았으며 이 결과는 흡착에 필요한 접촉시간이 확보되지 못한 것으로 판단된다. 마지막으로 여재의 표면 특성인 양이온 교환능력과 중금속 제거효율 사이의 상관관계는 찾아볼 수 없어 대부분 입자에 포획된 상태로 제거됨을 알 수 있었다. 본 연구의 결과는 향후 도시지역 강우유출수 처리를 위한 여과장치 설계 및 적정 여재 선정에 있어 중요한 자료로 활용될 수 있을 것이다.

전기분해공법을 이용한 고령화된 매립장 침출수 처리에 관한 연구 (A Study on the Aged Landfill Leachate Treatment with Electrolysis)

  • 정순형;이영세;최현국;최준호
    • 환경위생공학
    • /
    • 제20권1호
    • /
    • pp.32-39
    • /
    • 2005
  • Recently, sanitary landfill was one of the most widely used for disposal of waste in Korea. With increasing of use and public awareness of this method for disposal. there is an increased concern with respect to the pollution potential by the landfill leachate. Especially, an aged landfill leachate contained relatively large amount of the nonbiodegradable substances which could not be removed by biological treatment processes. So, this study was conducted to the removal of nonbiodegradable substances, such as Humic acid and Fulvic acid with the electrolysis. In this study, electrode materials, electrolyte concentration, electrode distance, current density, and pH value were found to have significant effect on both pollutant removal efficiency and current efficiency in electrochemical oxidation process.

강우시 인공습지를 이용한 유기물관리 (Management of Organic Matters by Constructed Treatment Wetlands during Rainfall Events)

  • 이상팔;박제철
    • 한국환경과학회지
    • /
    • 제26권3호
    • /
    • pp.401-410
    • /
    • 2017
  • This study analyzed the changes in the concentrations of organic matters in constructed treatment wetlands, coming from discharge water from a sewage treatment plant and non-point pollutant sources during rainfall events. At the beginning of a rainfall event, a massive amount of particulate organic matter flowed in, and was removed from the sedimentation basin (S1, S2); dissolved organic matter was removed after passing through stepwise treatment processes in the wetland. During dry period in the wetland, the removal efficiency rate for COD and TOC was -21 and -7%, respectively; during the rainfall event, the removal efficiency rate for COD and TOC were 47 and 43%, respectively. The highly-concentrated organic matters that flowd in at the beginning of the rainfall event was stabilized by various structures in the wetland before water discharge. Cyanobacteria blooms annually at the confluence of the So-ok stream and Daecheong Lake. Therefore, it is expected that the wetland will contribute significantly to reducing cyanobacteria and improving water quality in the area.