• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.696-699
• /
• 1997

In this paper, we presents that for discrete system with matched perturbation of uncertain parameters in the state coefficient matrix A(i.e., with perturbation of A in the range of the input matrix B), the poles of the perturbed closed loop system can be placed into the preassigned circle by the static-state feedback. We discuss the robust stabilization of the system satisfying the matching condition and application to the controller design problem.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.872-877
• /
• 1990

Robustness of a model refernece direct adaptive pole placement control for not necessarily minimum phase systems is studied subject to unmodeled dynamics and bounded disturbances. The adaptive control scheme involves two estimators for the system and the controller parameter estimation, respectively. The robustness is obtaind under some weak assumptions and by using both a normalized least-squares algorithm with dead zone and an appropriate nonlinear feedback.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 A
• /
• pp.319-322
• /
• 1992

This paper proposes indirect adaptive pole placement adaptive controller using a modified least squares method. If an adaptive controller has good performance, it is necessary that an estimator have fast convergence. This paper presents a modified least squares method which guarantees the stability of estimator and has fast convergence. In this algorithm, information on signal level is obtained from the determinent of covariance matrix and according to it, weighting factor is tuned.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.371-371
• /
• 2000

A strategy for the swing-up control according to states of the 2-link rotational pendulum is proposed. The proposed controller consists of two modes of control such as divergence mode and stabilization mode. When the controller is in divergence mode, control input is generated using sinusoidal and signum function to make the first and second links reach the bottom and top positions, respectively. After the controller finishes divergence mode, stabilization mode is initiated to keep the pendulum around the top position using pole-placement method. Dynamic models including actuator dynamics are obtained using coordinate changes at each control mode. Simulation results are given to show the effectiveness of the proposed method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.190-190
• /
• 2000

This paper presents a multirate state feedback control (MRSFC) method for systems sensitive to disturbance and noise based on the multirate estimator design using the current estimator. MRSFC updates the controller output slower than the measurement sampling frequency of system output by a lifting factor R=T$\sub$c//T$\sub$s/. The closed-loop MRSFC system is less sensitive to disturbance and noise due to filtering effect than the conventional single-rate control system. The multirate estimator gain is obtained from solving a conventional pole placement problem such that MRSFC has the same spectrum of eigenvalues in the s-plane as the single-rate control. We applied the proposed multirate state feedback controller to a galvanometer servo system. Simulation and experimental results show that settling and tracking performances are improved compared with a conventional single-rate pole placement control (PPC).

• Journal of Power Electronics
• /
• 제19권5호
• /
• pp.1235-1247
• /
• 2019

Zero-Voltage-Switching (ZVS) operation for a Wireless Power Transfer (WPT) system can be achieved by designing a ZVS controller. However, the performance of the controller in some industrial applications needs to be designed tightly. This paper introduces a ZVS controller design method for WPT systems. The parameters of the controller are designed according to the desired performance based on the closed loop dominant pole placement method. To describe the dynamic characteristics of the system ZVS angle, a nonlinear dynamic model is deduced and linearized using the small signal linearization method. By analyzing the zero-pole distribution, a low-order equivalent model that facilitates the controller design is obtained. The parameters of the controller are designed by calculating the time constant of the closed-loop dominant poles. A prototype of a WPT system with the designed controller and a five-stage multistage series variable capacitor (MSVC) is built and tested to verify the performance of the controller. The recorded response curves and waveforms show that the designed controller can maintain the ZVS angle at the reference angle with satisfactory control performance.

• Journal of Power Electronics
• /
• 제7권3호
• /
• pp.213-221
• /
• 2007

A digital state feedback control method for the current mode control of DC-DC converters is proposed in this paper. This approach can precisely achieve interleaved current sharing among the converter modules. As the controller design and system analysis are performed in the time domain, the proposed method can easily satisfy the required converter specification by using the pole placement technique. The digital state feedback controller in the continuous and discrete time domain is derived for the robust tracking control. For the verification of the proposed control scheme, a parallel module bi-directional converter in a prototype 42V/14V hybrid automotive power system, which is a design example in the continuous time domain, and a parallel module buck converter, which is a design example in the discrete time domain, are implemented using a TMS320F2812 digital signal processor (DSP).

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2000년도 추계학술대회 학술발표 논문집
• /
• pp.476-479
• /
• 2000

This paper deals with a robust pole placement method for uncertain linear systems. For all admissible uncertain parameters, a static output feedback controller is designed such that all the poles of the closed loop system are located within the prespecfied disk. It is shown that the existence of a positive definite matrix belonging to a convex set such that its inverse belongs to another convex set guarantees the existence of the output feedback gain matrix for our control problem. By a sequence of convex optimization the aforementioned matrix is obtained. A numerical example is solved in order to illustrate efficacy of our design method.

• 전기학회논문지
• /
• 제57권10호
• /
• pp.1708-1712
• /
• 2008

This paper describes a linear matrix inequality (LMI) approach to the design of robust low-order power system stabilizers (PSSs), which are used to damp out local-mode oscillations of synchronous generators. The performance of a PSS is expressed as the location of the closed-loop poles, and a single fixed-gain pole-placement controller is synthesized for a wide range of operating conditions. The synthesis results in simultaneous regional pole-placement stabilization. and is formulated as an LMI feasibility problem with a rank condition. A penalty method is applied to solve the rank-constrained LMI problem. Numerical experiments with a single-machine connected to an infinite bus system were performed to demonstrate the proposed method.

• 제어로봇시스템학회논문지
• /
• 제6권7호
• /
• pp.611-616
• /
• 2000

This paper presents a design method for the robust flight controller of a hyghly maneuvering aircraft subject to C.G variation. This method is based on LMI(Linear Matrix ZInequality) pole-placement design methodology for the polytopic models. Simulation results show that the proposed LMI-based pole-placement design methodology robustly yields uniform performance with adequate Flying Qualities (FQ) over the entire CG variation range.