• Polymer(Korea)
• /
• v.33 no.4
• /
• pp.319-325
• /
• 2009

The solution polymerization was conducted to synthesize pressure sensitive adhesive for polarizer film using acrylic monomers. 2-Ethylhexylacrylate, butylacrylate, acrylic acid were used as acrylic monomers. The ratio was 2-ethylliexylacrylate:butylacrylate:acrylic acid=25:50:3.6 by reflecting $-40^{\circ}C$ of glass transition temperature in the pressure sensitive adhesive. When 1 wt% of coupling agent was added to the polymerized pressure sensitive adhesive, the light transmissivity was significantly increased. This result is due to the enhancement of adhesive power against liquid crystal cell by Si-O bond of coupling agents. Cross-linking agent was added by 0.5, 1.0, and 1.5 wt% with respect to the synthesized polymer. Initial tackiness decreased, while cohesion increased with increasing crosslinking agent. In the analysis of contact angle, the increase of crosslinking agents yielded the enhancement of surface energy, resulting in the decrease of contact angle. From the measurement of heat resistance, the acrylic pressure sensitive adhesive showed excellent heat resistance regardless of change in temperature and contents in crosslinking agent. In the observation of a cutting plane, the increased crosslinking agent represented a smoother and cleaner section. Comprehensively, the optimum additive amount of crosslinking agent was determined to be 1.0 wt% to monomer.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2007.05a
• /
• pp.211.1-211.1
• /
• 2007

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.11a
• /
• pp.169-171
• /
• 2007

We need two operation modes to obtain the complex hologram without bias and the conjugate image in the modified triangular interferometer(MTI). To solve the problem, we proposed the optimized MTI with one wave plate, which can obtain cosine and sine functions by the combination of one wave plate and one linear polarizer. In the extraction of phase term using the combination of polarization components, the phase error occurs, and we simulated such potential phase errors in the optimized MTI.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.479-482
• /
• 2004

We report a method for simultaneous measurements of cell gap, twist angle, birefringence dispersion of liquid crystal (LC) material and alignment directions in filled reflective LC cells. The method is based on spectral measurements of the LC cell reflectivity for three orientations ($0^{\circ},45^{\circ},90^{\circ}$) of the exit polarizer and may be applied for LC cells with low and high gaps.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.05a
• /
• pp.143-145
• /
• 2005

We present the method to obtain four speckle patterns with relative phase shift of ${\pi}/2$ passive devices such as wave plate and polarizer, and calculate the phase at each point of the speckle pattern in shearographic system using Wollaston pin And, we analyzed the phase error caused by wave plates used in the proposed method by Jones matrix.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.16 no.3
• /
• pp.15-27
• /
• 1998

Several aspects of polymer dispersed liquid crystal(PDLC) film properties make them interesting for display application. Most versions of PDLC materials are able to modulate light without the use of polarizers, which offers advantages in optical throughput(brightness) and viewing angle compared to polarizer-based display. In this papers, we attemped to doe minimum of remaining liquid crystals at polymer network for the liquid crystal-polymer composite (LCPC) films. In results, best phase separation behaviors turned out liquid crystal/monomer/oligomer mixture system.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.1
• /
• pp.10-18
• /
• 2007

We synthesize and analyze the optical transfer function(OTF) of the modified triangular interferometer(MTI) using two-pupil synthesis method and we present the optimal MTI, which can obtain any bipolar function by combining a wave plate and a linear polarizer. Also, we analyze its potential phase error sources caused by polarization components.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.117-119
• /
• 2007

We need two operation modes to obtain the complex hologram without bias and the conjugate image in the modified triangular interferometer(MTI). To solve the problem, we proposed the optimized MTI with one wave plate, which can obtain cosine and sine functions by the combination of one wave plate and one linear polarizer. In the extraction of phase term using the combination of polarization components, the phase error occurs, and we analyzed such potential phase errors in the optimized MTI.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1739-1741
• /
• 2007

A 3D projection display using stacked screens to display the near and far images, respectively, is developed. The front screen is made of a scattering polarizer film, and the far image on the rear screen is clearly visible through it. The image is perceived as three-dimensional, and no eyestrain is suffered.

• Vacuum Magazine
• /
• v.2 no.3
• /
• pp.4-10
• /
• 2015

We developed a real-time three-polarizer spectroscopic ellipsometer based on a new data acquisition algorithm and a general data reduction (the process of extracting the ellipsometric sample parameters from the Fourier coefficients). The data acquisition algorithm measures Fourier coefficients of radiant flux waveform accurately and precisely. The general data reduction is introduced to represent the analytic functions of the standard uncertainties of the ellipsometric sample parameters, and the extracted theoretical values closely agree with the corresponding experimental data. Our approach can be used for optimization of measurement conditions, instrumentation, simulation, standardization, laboratory accreditation, and metrology.