• 대한교통학회지
• /
• 제31권2호
• /
• pp.45-59
• /
• 2013

이 연구는 우리나라에서 현재까지 사용되어 온 (수단O/D기반)화물수요추정법의 문제점 인식을 바탕으로 P/C기반 화물수요추정법과 비교 분석을 수행하였다. 우리나라 화물수단O/D는 화물의 최초기점과 최종종점 간 운송을 수단별 통행으로 나누어 인식하면서 접근트럭통행(Access/Egress Truck Trip)에 대한 정보가 누락되어있다. 이러한 이유로 수단O/D기반 화물수요추정법은 화물의 복합수단운송을 반영하지 못하는 단점이 있다. 이에, 본 연구는 우리나라 컨테이너 화물을 중심으로 P/C표와 복합수단선택모형을 추정하여 P/C기반 화물수요추정법을 제시하고, 기존 사용되어 오던 수단O/D기반 화물수요추정법과 기종점쌍 간 전환량, 수단통행물동량, 링크물동량을 비교하였다. 비교 결과 P/C기반 화물수요추정법은 복합운송을 제대로 모사하지 못하는 기존 수단O/D기반 화물수요추정법의 문제점을 해결할 수 있는 것으로 평가되었다.

• 한국환경복원기술학회지
• /
• 제14권3호
• /
• pp.15-32
• /
• 2011

This study was carried out to investigate the soil characteristics and propose the management for the Monument Beobsoo Marsh, Korea. The soil properties of O.M, $Ca^{2+}$, $Na^+$ and CEC were higher and the soil properties of pH_{1:5}$ and $P_2O_5$ were lower the studied sites than other marsh sites in Korea. Although the Heavy metals such as Pb, Hg, Cd, Cu, Zn, Cr and As were lower compare to the safety standard of soil pollution in Korea, the overall conservation management plan based on long-term monitoring should be considered just because it varied by the point and non-point source pollution within the studied marsh. The source of water pollution varied due to non-point polluting origins such as sewage inlet, degraded terrain for agriculture, fishing sites, sites of removed water grasses, pesticides, chemical fertilizers, as well as fallen leaves. The creation of an artificial marsh is recommended due to the soil environment of the studied sites may be changed owing to the accumulated contaminants from the sources of both of point or non-point contaminants. The establishment of the zones of core, buffer and transition which is basic management structure of the UNESCO MaB could be applied to manage the studied site. Simultaneously the promotion of voluntary participation and education of the local residents are needed.

• Korea-Australia Rheology Journal
• /
• 제15권1호
• /
• pp.9-17
• /
• 2003

The rheological behaviour of anatase $TiO_2$ with organic coating has been investigated extensively in this study. The yield stress was measured over a wide range of solids concentration and pH using stress-controlled and speed-controlled rheometers. The organic treatment leads to a shift of the isoelectric point (IEP) from around pH 5.5 to pH 2.4. A maximum yield stress occurs in the vicinity of the isoelectric point determined by electrokinetic measurements. The transition of rheological behaviour between elastic solid and viscous liquid is represented by a stress plateau in a plot of stress against strain. It is hypothesised that the slope of the stress plateau reflects the uniformity of the structure, and hence the distribution of bond strength. Altering the concentration and the surface chemistry can vary the bond strength and its distribution. therefore, resulting in different type of failure: "ductile-type" or "brittle-type". pH and volume fraction dependence of yield stress could be described quantitatively using existing models with reasonable agreement.easonable agreement.

• Journal of Biosystems Engineering
• /
• 제4권1호
• /
• pp.1-23
• /
• 1979

The use of barley seeder attached to rotary tiller in the rural area has a significant meaning not only for the solution of labor peak season, but also for the increase of land utilization efficiency. The facts that presently being used barley seeders are all based on the mechanical principles of the reverse rotation, center drive and are all using forward rotating tine, which is used to be easily and heavily worn out when it rotates reversely, raise problem of recommending them to rural area in Korea. Therefore, the main objective of the study was to develop new type of rotary tine attachable to barley seeders. To attain the objective the following approaches were applied. (1) The kinematic analysis of reverse rotating barley seeders. (2) The studies on the soil bin and artificial soil. (3) The comparative experiment on the power requirement of prototype tine. The results obtained from the studies are summarized as follow: 1. The kinematic analysis of barley seeder attached to rotary tiller: The following results were obtained from the kinematic analysis for deriving general formulae of the motion and velocity characterizing the rotary tine of barley seeders presently being used by farmers. a) The position vector (P) of edge point (P) in the rotary tine of reverse rotating, center drive was obtained by the following formula. $$P=(vt+Rcos wt)i+Rsin wt j+ \{ Rcos \theta r sin \alpha cos (wt- \beta +\theta r) +Rsin \theta r sin \alpha sin (wt-\beta + \theta r) \} lk $$ b) The velocity of edge point $(P^')$ of reverse rotating, center drive rotary tine was obtained by the following formula. $$(P^')=(V-wR sin wt)i+(w\cdot Rcoswt)j + \{ -w\cdot Rcos \theta r\cdot sin \alpha \cdot sin (wt-\beta +\theta r) + w\cdot Rsin \theta r\cdot sin \alpha \cdot cos (wt- \beta + \theta r \} k $$ c) In order to reduce the power requirement of rotary tine, the angle between holder and edge point was desired to be reduced. d) In order to reduce the power requirement, the edge point of rotary tine should be moved from the angle at the begining of cutting to center line of machine, and the additional cutting width should be also reduced. 2. The studies on the soil bin and artificial soil: In order to measure the power requirement of various cutting tines under the same physical condition of soil, the indoor experiments Viere conducted by filling soil bin with artificially made soil similar to the common paddy soil and the results were as follows: a) When the rolling frequencies$(x)$ of the artificial soil were increased, the densIty$(Y)$ was also increased as follows: $$y=1.073200 +0.070780x - 0.002263x^2 (g/cm^3)$$ b) The absolute hardness $(Y)$ of soil had following relationship with the rolling frequencies$(x)$ and were increased as the rolling frequencies were increased. $$Y=37.74 - \frac {0.64 + 0.17x-0. 0054x^2} {(3.36-0.17x + 0.0054x^2)^3} (kg/cm^3)$$ c) The density of soil had significant effect on the cohesion and angle of internal friction of soil. For instance, the soil with density of 1.6 to 1.75 had equivalent density of sandy loam soil with 29.5% of natural soil moisture content. d) The coefficient of kinetiic friction of iron plate on artificial soil was 0.31 to 0.41 and was comparable with that of the natural soil. e) When the pulling speed of soil bin was the 2nd forward speed of power tiller, the rpm of driving shaft of rotary was similar to that of power tiller, soil bin apparatus is indicating the good indoor tester. 3. The comparative experiment on the power requirement of prototype tine of reverse rotating rotary: According to the preliminary test of rotary tine developed with various degrees of angle between holder and edge pcint due to the kinematic analysis, comparative test between prototype rotary tine with $30 ^\circ $ and $10 ^\circ$ of it and presently being used rotary tine was carried out 2nd the results were as follows: a) The total cutting torque was low when the angle between holder and edge point was reduced. b) $\theta r$ (angle between holder and edge point) of rotary tine seemed to be one: of the factors maximizing the increase of torque. c) As the angle between holder and edge point ($\theta r$) of rotary tine was $30 ^\circ $ rather than $45 ^\circ $, the angle of rotation during cutting soil was reduced and the total cutting torque was accordingly reduced about 10%, and the reduction efficiency of total cutting torque was low when the angle between holder and edge point ($\theta r$) of rotary tine was $10 ^\circ $, which indicates that the proper angle between holder and edge point of rotary tine should be larger than $10 ^\circ $ and smaller than $30 ^\circ $ . From above results, it could be concluded that the use of the prototype rotary tine which reduced the angle between holder and edge point to $30 ^\circ $, insted of $45 ^\circ $, is disirable not only decreasing the power requirements, but also increasing the durabie hour of it. Also forward researches are needed, WIlich determine the optimum tilted angle of rotary brocket, and rearrangement of the rotary tine on the rotary boss.

• 한국물환경학회지
• /
• 제24권1호
• /
• pp.69-77
• /
• 2008

This study was conducted to know the characteristics of agricultural non-point source pollutants runoff by rainfall events at the upper catchment of Goseong reservoir in Gonjy city, Chungnam Province. For this study, the monitoring sites of the research catchment were set nineteen during the research period (between June 2005 and October 2006). Average runoff coefficient were observed 0.51 in 2005, 0.71 in 2006, respectively. The correlation coefficient (r) between the rainfall and peak-flow was investigated 0.787. By rainfall events, the water quality of the sites were shown like this : BOD 0.555~9.60 mg/L, T-N 0.01~13.50 mg/L, T-P 0.002~2.952 mg/L, and SS N.D~820.0 mg/L. The strong rainfall intensity was the most important factor of the soil erosion. The gabs of the arithmetic mean concentrations and the flow weighted mean concentrations were observed as the followings : BOD 0.0~29.2%, T-N 0.1~11.4%, T-P 0.4~95.2%, and SS 1.7~57.0% in 2005, and BOD 1.0~11.9%, T-N 0.7~7.3%, T-P 9.9~36.5%, and SS 6.6~36.5% in 2006, respectively. The BOD pollution load was 2,117 kg (36% of the total BOD loading of survey periods) while, T-N was 3,209.0 kg (27.9% of the total T-N loading of survey periods), T-P was 136.4 kg (37.4% of the total T-P loading of survey periods) and SS was 72,733.8 kg (51.8% of the total SS loading of survey periods) in the year 2005. In case of 2006, BOD load was 1,321.7, T-N was 2,845.8, T-P was 42.9, and SS was 16,275.8 kg, respectively.

• 디지털융복합연구
• /
• 제20권4호
• /
• pp.433-441
• /
• 2022

본 연구는 고등학생의 학업스트레스와 스마트폰 중독과의 관계에서 감성지능의 조절효과를 확인하기 위하여 시도되었다. 고등학생 207명을 대상으로 2019년 12월 1일부터 12월 23일까지 구조화된 설문지로 자료수집을 하였다. SPSS/WIN 23을 이용하여 기술통계, t-test, ANOVA, Pearson correlation, 위계적 회귀분석으로 분석하였다. 연구결과 학업스트레스(범위 1~5점)는 2.75점, 감성지능(범위 1~5점)은 3.63점, 스마트폰 중독(범위 1~4점)은 2.18점으로 나타났다. 학업스트레스는 감성지능과는 부적 상관관계(r=-.15, p =.030), 스마트폰 중독과는 정적 상관관계(r=.25, p<.001), 감성지능은 스마트폰 중독과 부적 상관관계(r=-.25, p<.001)를 보였고 감성지능이 학업스트레스와 스마트폰 중독과의 관계를 조졀하는 것으로 나타났다(F=10.45, p<.001). 고등학생의 학업스트레스와 스마트폰 중독을 감소시키기 위해서는 고등학생의 감성지능을 향상시킬 수 있는 프로그램의 개발과 적용이 필요하다.

• Restorative Dentistry and Endodontics
• /
• 제19권1호
• /
• pp.205-216
• /
• 1994

The purpose of this study is to evaluate of apical plug materials for the contral of extrusion and sealing ability of high-temperature thermoplasticized gutta-percha in plastic root canal blocks. Seventy seven plastic blocks with canal preformed were instrumented with # 50K file 1 mm beyond apical foramen. Blocks were randomly divided into 5 groups of 15 blocks each. Group 1 was filled by high-temperature thermoplasticized gutta-percha only. The another 4 groups were placed with apical plug materials each other and then remaining space was back filled with high temperature thermoplasticized gutta-percha Apical plug materials were used as follows; Group 2: Thermoplasticized gutta-percha (Thermoplasticized gutta-percha group) Group 3 :. Calcium hydroxide powder (Calcium hydroxide group) Group 4 : Silver point (Silver point group) Group 5 : Gutta-percha cone softened by chloroform (Gutta-percha cone group) All the blocks were stored in 100 % relative humidor at room temperature for 14 days. Filling material extruded was removed carefully and then weighed in analytic balance. Each block was placed in centrifuge tube filled with India ink, and then centrifuged for 20 minutes at 3,000 rpm. Apical leakage was measured from the apical foramen to the most coronal level of dye leakage in millimeter by two examiners under a stereoscope. The data were analysed statistically by Student's t-test The obtained results were as follows; 1. The amounts of material extruded through the foramen decreased in all of groups used apical plug materials (P<0.01). 2. Silver point group and gutta-percha cone group were similar linear leakage to high-temperature thermoplasticised gutta-percha technique only (P>0..5). 3. Calcium hydroxide group and thermoplasticized gutta-percha group showed more liner leakage than high-temperature thermoplasticized gutta-percha only (P<0.01, P<0.05). 4. High-temperature thermoplasticized gutta-percha technique with silver point and gutta-percha cone as apical plugs showed less linear leakage and less extrusion of filling material.

• 치위생과학회지
• /
• 제8권4호
• /
• pp.291-297
• /
• 2008

본 연구는 치과위생사들의 소진과 조직유효성의 정도를 파악하고 이들간의 관계를 알아보기 위해 대구와 인근지역에 근무하는 치과위생사 322명을 대상으로 설문조사를 실시하여 다음과 같은 결론을 얻었다. 1. 소진 전체 평균은 2.82(5점 척도)였고, 정서적 소진 3.26, 냉소적 태도 2.63, 직업효능감 감소 2.58이었으며, 조직유효성 전체 평균은 3.0(5점 척도)이었고, 조직몰입 3.12, 이직의도 2.73, 직무만족 3.14이었다. 2. 일반적 특성에 따른 조직유효성의 차이는 연령이 30세 이상에서 조직몰입(3.41)과 직무만족(3.48)이 가장 높았고(p = .031, .000), 결혼여부는 기혼자가 미혼자보다 조직몰입(3.37, 3.07)과 직무만족(3.40, 3.10)에서 유의하게 높았다(p = .014), 근무경력은 6년 이상에서 조직몰입(3.30)과 직무만족(3.29)이 가장 높았고(p = .002, .013), 이직의도(2.93)는 3~5년이 가장 높았으며(p = .005), 연봉은 2,500만원 이상이 조직몰입(3.57)과 직무만족(3.44)에서 가장 높았다(p = .000, .001). 3. 조직몰입과 관련 있는 변수는 직업효능감 감소, 정서적 소진, 냉소적 태도 순이었고($R^2=.42$), 이러한 요인들은 통계적으로 유의한 역상관관계로 조직몰입이 높을수록 소진요인은 낮아짐을 알 수 있었다. 이직의도는 정서적 소진, 냉소적 태도, 직업효능감 감소 순으로 유의하게 관련이 있었으며($R^2=.33$), 이들 요인들은 유의한 순 상관관계로 이직의도가 높을수록 소진요인도 높음을 알 수 있었다. 직무만족과 관련 있는 변수는 직업효능감 감소, 냉소적 태도, 정서적 소진, 연령 순이었고($R^2=.36$), 이들 요인들은 유의한 역상관관계로 직무만족이 높을수록 소진요인은 낮아짐을 알 수 있었다.

• 환경영향평가
• /
• 제8권1호
• /
• pp.41-49
• /
• 1999

This study was carried out to estimate the runoff loading characteristics of the non-point source pollutions in the Youngsan river basins by the method of land-use types and rainfall. The lysimeter test, rainfall and stream flowmeter measurement were performed to develop the pollutant loading unit discharged from the non-point sources. As the non-point sources, the unit pollutant discharge rates were different from the land-use types such as paddy field, upland, forest, housing site and others. The pollutant loading units classified by land-use types in the Youngsan river basins are as follows: The total BOD loading rate is 15.3 ton/day and the housing site is discharged 50.6%, the total T-N loading rate is 6.0 ton/day and the paddy field and upland is discharged 77.6%, and the total T-P loading rate is 0.39 ton/day and the paddy field and upland is discharged 81.2%. The pollutant loadings by rainfall in the Youngsan river basins are about 7,425 ton/year of BOD, 324 ton/year of T-N and 118 ton/year of T-P, respectively.

• 호남수학학술지
• /
• 제45권4호
• /
• pp.598-609
• /
• 2023

The purpose of this article is to obtain the spectrum, fine spectrum, approximate point spectrum, defect spectrum and compression spectrum of the double band matrix U (a₀, a₁, a₂; b₀, b₁, b₂), b₀, b₁, b₂≠0 on the sequence space ℓ_p (1 < p < ∞).