• Journal of Mechanical Science and Technology
• /
• v.14 no.3
• /
• pp.272-282
• /
• 2000

Based on numerical reduced minimization theory, new anisoparametric 3-node elements for out-of-plane curved beam are developed. The elements are designed to be free from spurious constraints. In this paper, the effect of the Jacobian upon numerical solution is analyzed and predicted through reduced minimization analysis of anisoparametric 3-node elements with different Jacobian assumption. The prediction is verified by numerical tests for circular and spiral out-of-plane deformable curved beam models. This paper proposes two kinds of 3-node elements with 7-DOF; one element employs 2-point integration for all strains, and the other element uses 3-point integration with a constant Jacobian within element for calculation of shear strain.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.2
• /
• pp.253-260
• /
• 1999

Occurrences of foodborne disease outbreaks are increasing in Korea. Among the outbreaks, Salmonella, Staphylococcus aureus, Vibrio parahaemolyticus are the most important organisms and meat and meat product the major sources of infection. Hazard Analysis Critical Control Point system is a process control system designed to identify and prevent microbial and other hazards in food production. It is considered to be the best process management system by the National Advisory Committee for Microbiological Criteria for Foods, the National Academy of Science, and the Codex Alimentarius Commission. The Korean Ministry of Health and Welfare established a legal basis for the implementation of the HACCP system in Article 32-2 (Hazard Analysis Critical Control Point) of the Food Sanitation Act in December 1995. The Ministry of Agriculture and Forestry has granted research funds for the development of this model system for application to traditional food products and processed fishery products as well as to raw meats. Implementation of the HACCP system is an important step and the Korean food industry and the Government are focused on ensuring food safety in Korea.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.370-375
• /
• 1992

An algorithm for the notion planning of the robotic hand is proposed to generate finite displacements and changes in orientation of objects by considering sliding effects between the fingertips and the object at contact points. Specifically, an optimization problem is firstly solved to find minimum contact forces and minimum joint velocities to impart a desired motion to the object at each time step. Then the instantaneous relative velocity at the contact point is found by determining velocities of the fingertip and the velocity of the object at the contact point. Finally time derivatives of the surface variables and contact angle of the fingertip and the object at the present time step is computed using the Montana's contact equation to find the contact parameters of the fingertip and the object at the next time step. To show the validity of the proposed algorithm, a numerical example is illustrated by employing the robotic hand manipulating a sphere with three fingers each of which has four joints.

• Journal of the Korean Ceramic Society
• /
• v.23 no.4
• /
• pp.35-40
• /
• 1986

The production process of a fine size fraction of Korean kaolin by ball milling is studied in this paper by analyzing the size distribution the size distribution of products with the Rosin-rammle formular and the rate process of cumulative size fractions with Alyavdin-Chujyo's formular. The size distribution is found to be divided in three regions a coarser part influenced by feed size an intermediate part where the size distribution shows a clear straight line relationship on Rosin-Rammler chart and the finest part with the ultimate limit of fineness by ball milling. Alyavdin-Chujyo's relationship is found to be valid over a very wide range of milling conditions. For different feed sizes the Alyavdin-Chujyo's relationship gives a group of straight lines with a common intersection point which can be defined as the limiting point of the persistent component region.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.4
• /
• pp.700-707
• /
• 2009

The application of renewable energy in electric power systems is growing rapidly in order to make provision for the inequality of the climate, the dwindling supplies of coal, oil and natural gas and a further rise in oil prices. Solar cell generators(SCG) is one of the fastest growing renewable energy. This paper presents a methodology on probabilistic production cost simulation of a power system including SCGs. The generated power by SCGs is variable due to the random variation of solar radiation. In order to solve this problem, the SCGs is modeled as multi-state operational model in this paper. Probabilistic production cost of a power system can be calculated by proposed method considering SCGs with multi-state. The results show that the impacts of SCGs added to a power system can be analyzed in view point of production cost using the proposed method.

• Journal of the Society of Naval Architects of Korea
• /
• v.40 no.1
• /
• pp.47-54
• /
• 2003

The majority of small/medium sized shipbuilders in Korea is poor in capital and then, should be restructured as an efficient production system with low investment. Due to considering this situation, the cooperative work system is proposed, in this study, as more effective production system for small/medium sized shipbuilder The cooperative work system Is the production system that many small/medium sized shipbuilders in a group jointly share the common facilities except minimum equipments and have managerial cooperation such as joint purchase of raw materials. The efficiency of cooperative work system is proved from economic and technical point of view with the case study of FRP shipbuilders of Sapjin industrial complex located at Mokpo area.

• Journal of the Korean Chemical Society
• /
• v.57 no.3
• /
• pp.377-381
• /
• 2013

Thevetia peruviana (Yellow Oleander) seed oil was extracted with n-hexane in a soxhlet extractor. The ethanolysis and methanolysis of the oil were carried out with 50% of potassium hydroxide in ethanol and methanol respectively by weight of oil, as catalyst. The biodiesel was tested for biodegradability using E. coli. The percentage yield of the FAEE and FAME were 84.8% and 91.6% respectively. The biodegradability values of 81.4% and 86.2% were obtained for FAEE and FAME respectively after a period of 28 days. Other fuel quality parameters determined are the cetane index of 47.19 (FAEE) and 58.97 (FAME), flash point of $198^{\circ}C$ (FAEE) and $175^{\circ}C$ (FAME), kinematic viscosity at $40^{\circ}C$ of 5.21 $mm^2s^{-1}$ (FAEE) and 5.10 $mm^2s^{-1}$(FAME), pour point of $4^{\circ}C$ (FAEE) and $-2^{\circ}C$ (FAME) and a cloud point of $6^{\circ}C$ (FAEE) and $3^{\circ}C$ (FAME). Thus, Thevetia peruviana oil has a high potential for use in production of environmentally friendly biodiesel.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.125-130
• /
• 1994

Recently,manufacturing work been transformed to small acale production from with various items to act up to user's expectation from mass production with a little items required in the past. The FMS using NC type mother machinaries has been applied actively also in domestic manufacturing line to meet thus tendancy, but there are many machining troubles occured in work process not be settled yet. Nowdays high efficiency has been required no less than high precision in grinding work for the improvement of productivity. In this study, to represent more advanced FMS can be adapted to thus situation In-process type monitoring method using AE and Current sensors is suggested to investigatethe machining condition in grinding process. As results from this experimental study, is is recoqnized well that grinding conditions and dressing point of in time can be estimated effectively using monitoring method suggested. Furthermore, surface shape of grinding wheel on voluntary point of in time can be predicted indirectly through the observation and comparison of AE signal waveform obtained as performance of continuous dressing work.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.628-631
• /
• 2002

This paper describes a wireless point of production(POP) system using Bluetooth that is used as a tool of a new wireless interface. We developed the wireless POP system that is composed of POP terminal and control software. The POP terminal wirelessly collects the shop floor information in real-time. And the control software helps to make appropriate decisions based on the collected information by the POP terminal. The software is developed by using Visual C＋＋ programming language. A case study is implemented to show the performance of the developed system.

• Korean Journal of Geomatics
• /
• v.1 no.1
• /
• pp.85-93
• /
• 2001

Geospatial database, which is the basis for Geo-Spatial Information Systems, is produced by conventional mapping methods. Recently, with increased demand for digital forms of the geospatial database, studies are carried out to automate its production. The automated mapping system is composed of the image acquisition subsystem, positioning subsystem, point referencing subsystem and the visualization subsystem. The image acquisition subsystem is the most important part of the overall production line because it is the starting point and will affect all subsequent processes. This paper presents a software analysis and design of the image acquisition subsystem. The design was carried out using the Unified Modeling Language which is a modeling method used extensively in the software engineering field.