• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권1호
• /
• pp.118-125
• /
• 2016

This paper presents a new high-efficient algorithm and architecture for an elliptic curve cryptographic processor. To reduce the computational complexity, novel modified Lopez-Dahab scalar point multiplication and left-to-right algorithms are proposed for point multiplication operation. Moreover, bit-serial Galois-field multiplication is used in order to decrease hardware complexity. The field multiplication operations are performed in parallel to improve system latency. As a result, our approach can reduce hardware costs, while the total time required for point multiplication is kept to a reasonable amount. The results on a Xilinx Virtex-5, Virtex-7 FPGAs and VLSI implementation show that the proposed architecture has less hardware complexity, number of clock cycles and higher efficiency than the previous works.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권7호
• /
• pp.2610-2630
• /
• 2021

The aim of this paper is to propose the alternative algorithm to finish the process in public key cryptography. In general, the proposed method can be selected to finish both of modular exponentiation and point multiplication. Although this method is not the best method in all cases, it may be the most efficient method when the condition responds well to this approach. Assuming that the binary system of the exponent or the multiplier is considered and it is divided into groups, the binary system is in excellent condition when the number of groups is small. Each group is generated from a number of 0 that is adjacent to each other. The main idea behind the proposed method is to convert the exponent or the multiplier as the subtraction between two integers. For these integers, it is impossible that the bit which is equal to 1 will be assigned in the same position. The experiment is split into two sections. The first section is an experiment to examine the modular exponentiation. The results demonstrate that the cost of completing the modular multiplication is decreased if the number of groups is very small. In tables 7 - 9, four modular multiplications are required when there is one group, although number of bits which are equal to 0 in each table is different. The second component is the experiment to examine the point multiplication process in Elliptic Curves Cryptography. The findings demonstrate that if the number of groups is small, the costs to compute point additions are low. In tables 10 - 12, assigning one group is appeared, number of point addition is one when the multiplier of a point is an even number. However, three-point additions are required when the multiplier is an odd number. As a result, the proposed method is an alternative way that should be used when the number of groups is minimal in order to save the costs.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2022년도 춘계학술대회
• /
• pp.246-248
• /
• 2022

Bernstein이 제안한 새로운 타원곡선 형태인 이진 에드워즈 곡선 (binary Edwards curves; BEdC)는 예외점이 없어 완전한 덧셈 법칙이 만족한다. 본 논문에서는 투영 좌표계를 적용한 BEdC 상의 점 스칼라 곱셈의 효율적인 하드웨어 구현에 대해 기술한다. 점 스칼라 곱셈을 위해 modified Montgomery ladder 알고리듬을 적용하였으며, 257-비트 이진 덧셈기와 이진 제곱기, 32-비트 이진 곱셈기를 사용하여 하위 이진체 연산을 구현했다. Zynq UltraScale+ MPSoC 디바이스에 구현하여 설계된 BEdC 크립토 코어를 검증하였으며, 점 스칼라 곱셈 연산에 521,535 클록 사이클이 소요된다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.1017-1020
• /
• 1998

We propose an algorithm which processes the floating-point $n_{addition}$traction and rounding in parallel. It also processes multiplication and rounding in the same way. The hardware model is presented that minimizes the delay time to get results for all the rounding modes defined in the IEEE Standards. An unified method to get the three bits(L, G, S)for the rounding is described. We also propose an unified guide line to determine the 1-bit shift for the post-normalization in the Floating-point $n_{addition}$traction and multiplication.

• 한국정보통신학회논문지
• /
• 제8권6호
• /
• pp.1212-1217
• /
• 2004

타원곡선 암호시스템에서의 가장 큰 뼈대가 되는 연산은 스칼라 곱셈 연산이다. 이러한 타원 곡선유한체 내에서 유한체 곱셈과 유한체 나눗셈보다 한 계층 상위의 개념에서 수행되는 스칼라 곱셈의 구현은 주로 두배점-덧셈(double-and-add)이라는 방식이 많이 쓰였고 〔1, 최근에는 NAF(Non Adjacent Format) 〔2〕 알고리즘이 제안되었다. 본 논문에서는 radix4 Booth's 알고리즘을 응용하여 기존 방식보다 한 단계 더 효율적인 스칼라 곱셈 알고리즘을 제안하였다 기존의 double-and-add 알고리즘으로 처리하였던 스칼라 곱셈 방식을 개선한 새로운 네배점-덧셈(quad-and-add) 알고리즘을 유도한 다음, 이를 사용하기 위하여 새로운 네배점(point quadruple; quad( )) 연산을 유도하고 증명하였다. 유도한 수식들은 C 프로그램과 HDL을 사용하여 실제 계산에 응용하여 증명하였다. 제안된 타원곡선 스칼라 곱셈 방식은 타원곡선 암호시스템 응용 분야의 효율적이고 빠른 연산을 처리하는데 적용할 수 있다.

• 전자공학회논문지C
• /
• 제34C권11호
• /
• pp.47-55
• /
• 1997

In general, processing flow of the conventional floating-point multiplication consists of either multiplication, addition, normalization, and rounding stage of the conventional floating-point multiplier requries a high speed adder for increment, increasing the overall execution time and occuping a large amount of chip area. A floating-point multiplier performing addition and IEEE rounding in parallel is designed by using the carry select addder used in the addition stage and optimizing the operational flow based on the charcteristics of floating point multiplication operation. A hardware model for the floating point multiplier is proposed and its operational model is algebraically analyzed in this paper. The proposed floating point multiplier does not require and additional execution time nor any high spped adder for rounding operation. Thus, performance improvement and cost-effective design can be achieved by this suggested approach.

• ETRI Journal
• /
• 제32권1호
• /
• pp.1-10
• /
• 2010

In this paper, we present a fast Fourier transform (FFT) processor with four parallel data paths for multiband orthogonal frequency-division multiplexing ultra-wideband systems. The proposed 128-point FFT processor employs both a modified radix-$2^4$ algorithm and a radix-$2^3$ algorithm to significantly reduce the numbers of complex constant multipliers and complex booth multipliers. It also employs substructure-sharing multiplication units instead of constant multipliers to efficiently conduct multiplication operations with only addition and shift operations. The proposed FFT processor is implemented and tested using 0.18 ${\mu}m$ CMOS technology with a supply voltage of 1.8 V. The hardware- efficient 128-point FFT processor with four data streams can support a data processing rate of up to 1 Gsample/s while consuming 112 mW. The implementation results show that the proposed 128-point mixed-radix FFT architecture significantly reduces the hardware cost and power consumption in comparison to existing 128-point FFT architectures.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 B
• /
• pp.788-790
• /
• 1999

A software implementation of floating-point addition and multiplication is presented. For this, the ANSI/IEEE standard for binary floating-point arithmetic is reviewed briefly. The architecture and behavior of the $Intel^{(R)}\;80{\times}87$ FPU is fully studied and basic algorithms for floating-point addition and multiplication are used for the implementation. Some examples and their verifications are also presented.

• East Asian mathematical journal
• /
• 제39권5호
• /
• pp.529-536
• /
• 2023

This paper introduces the Frobenius endomophisms on the binary Hessian curves. It provides an efficient and computable homomorphism for computing point multiplication on binary Hessian curves. As an application, it is possible to construct the GLV method combined with the Frobenius endomorphism to accelerate scalar multiplication over the curve.

• 한국산학기술학회논문지
• /
• 제12권4호
• /
• pp.1867-1875
• /
• 2011

이 논문에서는 저면적 256-point FFT 구조를 제안한다. 저면적 구현을 위하여 CSD(Canonic Signed Digit) 곱셈기 방식을 채택하여 구현하였다. CSD 곱셈기 방식을 효율적으로 적용하기 위해서는 곱셈연산의 가지 수가 적어야 하는데, 여러 알고리즘을 조사한 결과 Radix-$4^2$ 알고리즘이 곱셈연산의 가지 수가 적음을 발견하였다. 따라서 제안 구조는 Radix-$4^2$ DIF 알고리즘과 CSD 곱셈기 방식을 사용하였다. 즉 Radix-$4^2$ 알고리즘을 사용하여 4개의 스테이지에서 사용되는 곱셈연산의 가지 수를 최소화한 후에 각각의 곱셈연산 블록은 CSD 곱셈기를 사용하여 구현하였다. CSD 곱셈기 구현에서 공통패턴을 공유하여 덧셈기의 수를 줄일 수 있는 CSS(Common Sub-expression Sharing) 기술을 사용하여 구현면적을 더욱 감소시켰다. 제안된 FFT 구조를 Verilog-HDL 코딩 후 합성하여 구현한 결과, Radix-4를 사용한 구조와 비교하여 복소 곱셈기 부분의 29.9%의 cell area 감소를 보였고 전체적인 256-point FFT 구조에 대한 비교에서는 12.54% cell area 감소를 보였다.