• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.04a
• /
• pp.669-675
• /
• 1997

This paper investigates the performances of GFRP bar and its possibility for using a substitute of steel bar. GFRO bar was made with introducing the glass fiber into GTR added UPE. We carried out the tensile test of GFRP and steel bar and out the three point bend test bond-test and fracture energy measurement on the GFRP bar and steel bar reinforced concrete. The GFRP bar was excellent as comparison with steel bar in the contribution to the energy absorption and the ductility of concrete. But its tensile, bond and bend strengthes were comparatively small. In order to improve these defects, we judged that glass fibers in GFRP bar must be completely adhesive one another by the impregnating glass fibers into UPE.

• The Korean Journal of Ceramics
• /
• v.3 no.1
• /
• pp.29-33
• /
• 1997

Four diamond films were deposited by the microwave plasma assisted chemical vapor deposition method varying CH4 concentration from 2.5 to 10% in the feeding gases. Thermal conductivity was measured on these free standing films by the steady state method from 80 K to 400K. They showed higher thermal conductivity as the film deposited with lower methane concentration. One exception, 7.79% methane concentration deposited film, was observed to be the highest thermal conductivity. Phonon scattering processes were considered to analyze the thermal conductivity with the full Callaway model. The grain size and the concentration of the extended and the point defects were used as the fitting parameters. Microstructure of diamond films was investigated with the scanning electron microscopy and Raman spectroscopy.

• IE interfaces
• /
• v.20 no.1
• /
• pp.87-93
• /
• 2007

Burn-in is an engineering method for screening out products containing reliability defects which would cause early failures in field operation. Previously, various burn-in models have been proposed mainly focused on the trade-off of shop repair cost and warranty cost ignoring manufacturing yield. From the view point of a manufacturer, however, burn-in decreases warranty cost at the expense of yield reduction. In this paper, we provide a general model quantifying a trade-off between product yield and reliability, in which any defect distribution from previous yield models can be used. A profit function is expressed in burn-in environments for determining an optimal burn-in time. Finally, the method is illustrated with gate oxide failures which is an important reliability concerns for VLSI CMOS circuits.

• Proceedings of the KSR Conference
• /
• 2002.10a
• /
• pp.31-37
• /
• 2002

Rail cars are subject to vibration, impact and wear which can cause severe defects leading to a fatal accident. Thus, they are designed and manufactured in consideration of such factors influencing their service lifetime. Under-frames are composed of steel and support most of load imposed on the car. Steel is very sensitive to corrosive environment and corroded even in a normal service condition. Regular maintenance can Protect steel Parts from corrosion by painting. However, an exposure of defect point to corrosive agents can make corrosion proceed to a considerable depth, which may cause the structure to remain under safety standard. It is necessary to understand corrosion behavior of rail cars in order to estimate unexpected accidents by corrosion.

• Journal of Navigation and Port Research
• /
• v.31 no.9
• /
• pp.771-778
• /
• 2007

A container terminal gate is not only an entrance of containers, but also the first input point of containers' information. Therefore, to achieve the accuracy of container information, there are various containers' numbers recognition methods used. Gate productivity can significantly vary depending upon those recognition methods. Recently, RFID which is one of the u-IT businesses run by the Korean government is under consideration for application to the gate as an automatic system. If RFID is used, it is expected to have both the qualitative benefits through avoiding defects of other systems and the quantitative benefits by improving productivity. Hence, this study aims to provide some insight on the benefits of RFID, and to compare productivity of the existing gate system with the RFID gate system based on computer simulation.

• Proceedings of the KAIS Fall Conference
• /
• 2001.05a
• /
• pp.155-161
• /
• 2001

반도체 소자의 기판 재료로 사용되고 있는 실리콘 웨이퍼는 그 정밀도가 매우 중요하다. 본 연구에서는 균일한 Dopant 농도 분포를 얻을 수 있는 중성자 변환 Doping을 이용하여 실리콘에 인(P)을 Doping하는 연구를 수행하였다. 중성자 변환 Doping, 즉 NTD(Neutron Transmutation Doping)란 원자번호 30인 실리론 동위원소에 중성자가 조사되면 원자번호 31인 실리콘으로 변환되고, 2.6시간의 반감기를 갖고 decay 되면서 인(P)으로 변하게 되어 실리콘 웨이퍼에 n-type 전도를 갖게 하는 것을 말한다. 본 연구에서는 하나로 원자로를 이용하여 고저항(1000-2000Ω㎝) FZ 실리콘 웨이퍼에 중성자 조사하여 저항의 변화를 관찰하였고, 중성자 조사시 발생하는 점결함을 분석하여 점결함이 저항 변화에 미치는 영향을 알아보았다. 중성자 조사 전 이론적 계산에 의해 16.8Ω㎝와 4.76Ω㎝의 저항을 얻을 수 있을 것으로 예상되었고, 중성자 조사 후 SRP로 측정한 결과 실리콘 웨이퍼가 3Ω㎝과 2.5Ω㎝의 저항을 가지고 있을 확인할 수 있었으며, FT-IR 분석결과 점결함의 변화 양상을 확인할 수 있었다.

• Journal of the Korean institute of surface engineering
• /
• v.29 no.5
• /
• pp.482-486
• /
• 1996

The progress of microelectronics technology has been requiring agressive developments of device technologies. Also the requirements of the next generation devices is heading to the limits of their functions and materials, and hence asking the very specific silicon wafer such as SOI(Silicon On Insulator) wafer. The talk covers the dome stic and world-wide status of SOI device developments and applications. The presentation will also touch some predictions such as SOI device prgress schedules, impacts on the normal wafer developments, market sizes, SOI wafer prices, and so on. Finally it will cover technical aspects which are silicon oxide conditions for bonding, point defects and, surface contaminations. These points will be hopefully overcome by involved people in microelectronics industry.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.7
• /
• pp.708-712
• /
• 2004

Shallow $p^+-n$ junctions were formed by ion implantation and dual-step annealing processes. The dopant implantation was performed into the crystalline substrates using BF$_2$ ions. The annealing was performed with a rapid thermal processor and a furnace. FA+RTA annealing sequence exhibited better junction characteristics than RTA+FA thermal cycle from the viewpoint of junction depth and sheet resistance. A new simulator is designed to model boron diffusion in silicon. The model which is used in this simulator takes into account nonequilibrium diffusion, reactions of point defects, and defect-dopant pairs considering their charge states, and the dopant inactivation by introducing a boron clustering reaction. Using initial conditions and boundary conditions, coupled diffusion equations are solved successfully. The simulator reproduced experimental data successfully.

• Journal of the Korea Furniture Society
• /
• v.17 no.1
• /
• pp.73-81
• /
• 2006

Since early times, paper has been the leading means of expression in human civilization. Along with the development of languages, people have used paper as their major intermediation measures to flourish the culture. At this point of time when studies in latest design are various and abundant, these fixed ideas on paper should be eliminated first for inventive thinking and freedom of expression. Because breaking the established notion helps to diversify the function of paper. We can see furniture made of paper come in useful to our ancestors in their daily life with the development of "Hanjiquot;. Each piece of paper furniture had its own function and beauty depending on processing method. Not only has been used for materials of basic modeling in the process of modern furniture designing, paper has also been used for the main material for the purpose of a new trial. If we try to find out the ways to take diverse characteristics of paper and develop them, while overcoming the defects of the material, paper has great potentiality for many kinds of use in furniture industry.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.469-472
• /
• 2008

In general, structures in service gradually lose original performance according to time due to initial defects in design and construction, or exposure to unfavorable external conditions such as repeated loading or deteriorating environment, and in extreme cases, may collapse in large disaster. Therefore, in order to maintain the serviceability of structures at optimal level, advanced structure measuring system which can inform optimal time point and method of maintenance is required in addition to accurate prediction of residual life the structure by periodic inspection. To guarantee the safety level of bridge structure and to prevent from disaster, the integration of safety network for bridge structures are needed. Therefore in this study, to enhance the effectiveness of safety network for bridge, the connection methodologies between safety network and pre-installed bridge monitoring system are investigated.