• Journal of Biosystems Engineering
• /
• v.32 no.4
• /
• pp.215-222
• /
• 2007

In the study, the cone index, the cohesion and the internal friction angle of soil were measured before and after tillage in order to suggest relative improvement in soil properties by comparing the two measured values before and after tillage. The tillage methods tested in the study were five combinations of plowing and rotovating; one plow tillage operation, one plow followed by one rotary, one plow followed by two rotary, one rotary without plow and two rotary without plow. The experiments were performed in a soil bin in Sunggyunkwan Univ. and in four selected test fields in Yeoju, Seodun-Dong, Suwon (especially, two different fields) and Chungju. In general, the internal friction angle and cohesion of soil increased with the increase of soil compaction. After applying the tillage operations, the internal friction angle reduced by 14 degree and the cohesion decreased up to about $2.2N/cm^2$ on the soil bin in comparison with those before tillage. The two values, however, reduced by 9 degree and up to about $1.0N/cm^2$ on the tested fields. The CIs for all the tillage operations on the soil bin and on 4 different test fields were decreased by 800 kPa in comparison with those before tillage. The best combination of tillage operations for decreasing the CIs of soil was one plow operation followed by one rotary. The CIs for one plow operation followed by two rotary were slightly higher than that for one plow operation followed by one rotary because one plow operation followed by two rotary crushed down the soil excessively, so that the porosity of soil decreased.

• Journal of Mechanical Science and Technology
• /
• v.20 no.6
• /
• pp.738-747
• /
• 2006

The friction behaviour of Si-wafer, diamond-like carbon (DLC) and two self-assembled monolayers (SAMs) namely dimethyldichlorosilane (DMDC) and diphenyl-dichlorosilane (DPDC) coated on Si-wafer was studied under loading conditions in milli-newton (mN) range. Experiments were performed using a ball-on-flat type reciprocating micro-tribo tester. Glass balls with various radii 0.25 mm, 0.5 mm and 1 mm were used. The applied normal load was in the range of 1.5 mN to 4.8 mN. Results showed that the friction increased with the applied normal load in the case of all the test materials. It was also observed that friction was affected by the ball size. Friction increased with the increase in the ball size in the case of Si-wafer. The SAMs also showed a similar trend, but had lower values of friction than those of Si-wafer In-terestingly, for DLC it was observed that friction decreased with the increase in the ball size. This distinct difference in the behavior of friction in DLC was attributed to the difference in the operating mechanism. It was observed that Si-wafer and DLC exhibited wear, whereas wear was absent in the SAMs. Observations showed that solid-solid adhesion was dominant in Si-wafer, while plowing in DLC. The wear in these two materials significantly Influenced their friction. In the case of SAMs their friction behaviour was largely influenced by the nature of their molecular chains.

• Korean Journal of Organic Agriculture
• /
• v.7 no.2
• /
• pp.1-16
• /
• 1999

In this study, questionnaire were made to environment-friendly producers of apples regarding farm management methods in low-input production method. utilizing organic materials, production and marketing of apples with lower agricultural chemical residues. Besides, five apples farms were visited to find out their management situation by employing the low-input production method in order to protect the environment as well as consumer's health. Those five low-input apple farms were scattered in Kyungbuk, Chungnam, and Chonnam Provinces, There were not many low-input apple farms across the nation from the beginning and, as a result, increasing the sample size was basically very difficult. Most of these farms were using 140hrs of labor per 10a, of which 30hrs in pre-season management, 25hrs in plowing and weed control, 15hrs in disease and pest control, 20hrs in harvest and marketing and 50hrs in miscellaneous activities. Relatively, pest control takes much time in that they would spray pesticides 7-10 times a season to control the apple disease, 9 times on the average. The average gross revenue of low-input apple farms was about \2,000,000/10a, and their average yield was 2,000kg/10a, which are 25% and 13% lower, respectively, than the ordinary apple production case. This means the low-input farmers are inefficient in marketing their products. On the other hand, their production costs were 20.4% higher than the ordinary apple farms on the average. Since the imported foreign fruits including apples must use various agricultural chemicals on their way to the export markets, the domestic low-input apples have competitive edge over them in therms of food safety. In order to improve the low-input apple industry, active cooperation is needed among the producers, government and researchers more than ever. Among other things, production cost reduction and quality improvement with lower chemical residues are part of the urgent matters to be done.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.29 no.1
• /
• pp.71-89
• /
• 2011

This study was carried out to get the exact information of the physical structures and humanistic landscapes to restore the prototype of the rear garden at Changkyung Palace. In this study, various drawings and historical documents such as Donggwoldo(東闕圖) and Joseonwangzosilok(朝鮮王朝實錄) were analysed. The innate characteristics and identity being inherent of rear garden of Changkyung Palace were tried to match the presence of acting to the specific places. The rear garden at Changkyung Palace was not only the secret garden for the rest of royal family and private life for king and queens but also used as public space for the various ceremonies. At the beginning of building, the rear garden at Changkyung Palace was built for the farming and sericulture of royal family. Since then, various events were held in this place such as archery, military drill and royal plowing and meeting with vassals which were political activities. At the rear garden of Changkyung Palace, Chundangdae(春塘臺), Kwanfunggak(觀豊閣) and Kwandukjung(觀德亭) were the base of specific activities. Also function, use, form, structure, planting and water elements were related organically in these areas.

• Journal of Biosystems Engineering
• /
• v.16 no.4
• /
• pp.384-398
• /
• 1991

A computer program was developed to select the optimum size of farm machine and analyze its operation costs according to various farming conditions. It was written in FORTRAN 77 and BASIC languages and can be run on any personal computer having Korean Standard Complete Type and Korean Language Code. The program was developed as a user-friendly type so that users can carry out easily the costs analysis for the whole farm work or respective operation in rice production, and for plowing, rotarying and pest controlling in upland. The program can analyze simultaneously three different machines in plowing & rotarying and two machines in transplanting, pest controlling and harvesting operations. The input data are the sizes of arable lands, possible working days and number of laborers during the opimum working period, and custom rates varying depending on regions and individual farming conditions. We can find out the results such as the selected optimum combination farm machines, the overs and shorts of working days relative to the planned working period, capacities of the machines, break-even points by custom rate, fixed costs for a month, and utilization costs in a hectare.

• Korean Journal of Soil Science and Fertilizer
• /
• v.37 no.2
• /
• pp.97-103
• /
• 2004

This study was performed to assess the influences of liquid pig manure (LPM) on the rice growth and nutrient behavior in soil under two different drainage comditions. Soils of paddy field were Jeonbuk and Gangseo series, and drainage conditions of the soils were imperfectly drained and moderate well drained, respectively, Application of LPM was based on nitrogen, and the treatments included 110 (LPM-N100%), 165 (LPM-N150%) and $220(LPM-N200%)kg\;N\;ha^{-1}$. In the LPM-N150% treatment, rice growth and yield were similar to the control treatment of conventional chemical fertilizer application. Rice yield of moderately well drainedfield were 3-11% higher than that of imperfectly drained field. Loss of nitrogen through $NH_3$ gas after application of LPM was higher in no plowing than in rotary plowing field. Losses of $NO_3-N$, $NH_4-N$, $SO_4$, Ca and K through runoff water were increased as the amount of LPM application increased. Losses of $NO_3-N$ and K through infiltration were higher in LPM-150% and LPM-N200% treatments compared to the chemical fertilizer treatment. Contents of $NO_3-N$ in infiltration water measured from trasplanting to tillering stage was higher at the moderately well drained condition than imperfectly drained condition. Contents of $P_2O_5$ and K in soil were accumulated by application of LPM compared to the chemical fertilizer plot.

• Korean Journal of Weed Science
• /
• v.12 no.1
• /
• pp.61-69
• /
• 1992

Weed control in mid season of rice fields was systemized earlier in Korea than in Western Europe or China. The most representative method was pull out the weeds by hand followed by 'Seojibeob'(鋤地法 : method of hoeing) after draining. It was practiced 3 to 4 times to do extensively. Also, the purposes of transplanting arid direct seeding in rows were to manage weed problems effectively, which means that the development of cultural techniques is closely related to 'Seojibeob'(鋤地法). From the 17th century, techniques of deep plowing(because of principal : 'Simkyonginu'(深耨易耕 : Deep plowing make easy to hoe) and 'Hwanubeob'(火耨法 : derived from 'Hwakyong soonubeob) for effective weed management of waste lands were newly adopted and spreaded due to the situations ant that time. Thus, the practice of large-scale farming resulted from the adaptation of the techniques and methods described above. In the 18th to 19th century, the cultural methods, not much different from 'Seojibeob', were changed and the number of weeding was decreased. Especially, the techniques of dry seeding of rice were practiced by originating the ideal 'Seojibeob', in which water availability was improved in northern drought areas and also weed problems were easily managed. In addition, intensively large-scale farming showed weed management problems, so that 'Cheonilrok'(千一錄) by Woo Ha-young described the techniques of 'Banjongbeob'(反種法) or 'Hwanubeob' and in the end of the Chosun dynasty extensively large-scale farming was practiced by putting intensive and extensive techniques together. As the results, agricuitural productivity of Korea was increased 5 times by that time.

• Journal of Biosystems Engineering
• /
• v.6 no.2
• /
• pp.20-32
• /
• 1982

This survey was conducted to investigate the present status of farm tractor utilization for obtaining a basic reference to the establishment of the government's agricultural mechanization strategies. Thirty two counties from the eight provinces except Jeju were covered in this study. From these selected areas, 433 sample farms having farm tractor were taken to obtain the general informations by the enquete, and 93 sample farms among them to investigate the status of daily tractor use in the year of 1980. The analyzed results are summarized as follows: 1. Farm tractors owned by the rice-oriented farms holds 71.5 percent of the total number of tractors the livestock-oriented farms 17.0 percent, and the orchard-oriented farms 7.0 percent. Among the farm tractors 64.3 percent was a large size (46ps) and 35.7 percent a small size(19~23ps). 2. Most of the tractors surveyed were equipped with the essential attachments such as plow and rotavator. About 18 percent of the tractor owners had no trailer, which seemed too high considering the large percentage of tractor use for transportation. The availability of other attachments was very low except a grader on the rice-oriented farms and a hay harvester and a front loader on the livestock-oriented farms. 3. The average size of farm was 3.9 hectare for the rice-oriented farms, 13.9 hectare for the livestock-oriented farms and 7.4 hectare for the orchard-oriented farms. It was obious that the average farm size of was too small compared to the theoretical machine capacity of the tractors. 4. About 70 percent of the tractor operators were in the age of twenties and thirties. About 90 percent of them had an educational level of middle school graduate or above even though their technical level was very low. 5. Any particular problem in tractor use was not found in this survey. From the farmer's preference for purchasing a new tractor, however, it is estimated the demand on a 20-30ps tractor will be more increased. 6. The average annual use of tractor was of about 100 days or 400 hours. It appeared that the rice-oriented farms used most with 412.4 hours per year, and followed by the livestock-oriented farms with 403.6 hours, the orchard oriented farms with 377.7 hours. 7. Among the total hours of tractor use, 47.3 percent was for transportation, and 41.6 percent was for plowing and rotary tillage. The largest portion of the annual tractor use was taken by transportation on the livestock-oriented farms, by land preperation on the rice-oriented farms, and by loading and chemical spraying on the orchard-oriented farms. 8. The hours of tractor use had a peak in May. The hours of use for own farm was remarkably different among the different farm oriented, but there was no considerable difference between the too different sizes of tractor. 9. The hours of tractor use decreased as the age of the operator or the educational level increased. The reason might be that the operators who had a high educational level or were older had a tendency of disliking custom works. 10. The average custom use of tractor was 171.3 hours per year, and the ratio of custom work was 63.7 percent on the rice-oriented farms, 31.7 percent on the livestock-oriented farms and 22.4 percent on the orchard-oriented farms. Among the custom works, the most popular one was the grader leveling. 11. The charge on custom work was about 40,000 Won per hectare for plowing and rotary tillage, and it was the most expensive in the southeastern region, and next followed by the southwestern region. 12. The average plowing capacity of the small tractor was 7.8 hours per hectare in the paddy field, and that of the large tractors was 4.3 hours per hectare. The average rotary-tilling capacities of the small and the large tractors were 6.5 and 4.3 hours per hectare, in the paddy field respectively.

• Korean Journal of Environment and Ecology
• /
• v.25 no.6
• /
• pp.893-902
• /
• 2011

The purpose of this study was to survey structures and growth conditions of Pinus densiflora village groves, and to establish management strategies for their desirable growth and conservation. Twelve village groves were selected in western Gangwon province for the study. The age of the study groves ranged from 50 to 200 years. Average dbh (diameter at breast height) and density of trees for each study grove were 27~52cm and 0.5~9.3 trees/$100m^2$, respectively. Soil environments were favorable to Pinus densiflora growth in the majority of the study groves, but 2 study groves with sandy soils showed considerably poor nutrient contents. Low tree vitality was found in some of the study groves due to poor conditions of root growth from soil fill and trampling. There were detachment of cambial tissue and damage of stem cavity at 6 study groves, which were caused by artificial injury, careless pruning, and frost damage. Light disease damage by Rhizosphaera kalkhoffii and phomopsis blight were found at 6 study groves. Light pest damage by Thecodiplosis japonensis was also found at 6 study groves, but the pest damage at 2 study groves was relatively considerable. Thus, major factors limiting normal growth of Pinus densiflora village groves were infertility, soil fill and trampling, stem damage, and disease and pest. Desirable management strategies were explored to solve growth-related problems and to conserve the study groves. The management strategies included fertilization of organic matter and lime, removal of soil fill, soil plowing and graveling, wood-trail installation or woodchip mulching, supply of wood fences and protective frames, surgical operation for damaged stems, vitality enhancement, and trunk injection to improve growth environments or control stem damage and disease/pest.

• Research in Plant Disease
• /
• v.17 no.3
• /
• pp.351-357
• /
• 2011

Occurrence of Rice stripe virus (RSV) was investigated in Jeonnam province from 2008 to 2011. Incidence of RSV was surveyed in paddy fields during growth stage. In western and southern coast parts of 5 districts, Jindo, Wando, Shinan, Haenam and Muan, rice was severely damaged by RSV from 2008 to 2009. But, RSV didn't almost occur in 2010. Viruliferous ratio (VIR) of RSV from overwintered small brown plant hopper (SBPH, Laodelphax striatellus) showed 4.7%, 11.3%, 8.7%, and 2.8% from 2008 to 2011. It was highly recorded in Jindo, Wando, and Shinan of southwestern area. SBPH was collected by sucking machine at 1 $m^2$ with 3 replications per paddy field in March. The density of SBPH was high on March, but low on April in non-cultivated barley field from winter to spring. Farmer's plowing this season assumed to be a cause of SBPH density decrease. The number of SBPH was 7.7, 5.4, and 4.0 per $m^2$ during three years, respectively.