• 열처리공학회지
• /
• 제26권4호
• /
• pp.178-184
• /
• 2013

The effects of thickness and surface grinding condition on the fracture strength of Si wafer with a thickness under $100{\mu}m$ were investigated. Fracture strength was measured by ball breaker test for about 330 dies (size: $4mm{\times}4mm$) per each wafer. For statistical analysis of the fracture strength, scale factor was determined from Weibull plot. Ball breaker fracture strength was observed to increase with decreasing thickness of silicon die. For the silicon dies of different surface conditions, ball breaker fracture strength was high in the order of polished, ground (#4800), and ground (#320 grit) specimen. Probabilistic fracture strength (i.e., scale factor) increased with decreasing surface roughness of silicon die.

• 한국세라믹학회지
• /
• 제18권1호
• /
• pp.35-40
• /
• 1981

The kinetics of the dehydration of Ha-dong kaolin was studied isothermally at various temperatures. Dehydration rate was measured by thermogravimetry method in the temperature range of 440~50$0^{\circ}C$ and the particle size range of 170~325mesh. The general equation f($\alpha$)=kt, where $\alpha$ is the fraction reacted in the time and the function f($\alpha$) depends on the reaction mechanism, was applied to this reaction. The function, f($\alpha$) was obtained by application of reduced-time plot and plot of lnln (1-$\alpha$) vs. ln (time), and expressed as (1-$\alpha$) ln (1-$\alpha$)+$\alpha$=kt. The dehydration followed the diffusion-controlled reaction model and gave activation energy of 30Kcal/mole.

• 대한기계학회논문집
• /
• 제1권1호
• /
• pp.17-25
• /
• 1977

관벽의 영향을 무시할 수 있는 요기내의 액체중을 상승하는 단일공기포의 상승속도, 형산, 경로를 명확히 하고 원주형관, 정방형관, 평행평판간의 액체중을 상승하는 단일기포의 상승속도에 미치는 관벽영향을 구하였다. 원주형관을 상승하는 공기포는 dimensionless plot로 실험치를 통 적으로 표현할 수가 있었으며 관벽영향을 받지않고 관중을 상승할 수 있는 공기포에 대한 최저의 관경을 결정할 수가 있었다.

• 한국재료학회지
• /
• 제4권8호
• /
• pp.927-933
• /
• 1994

비구형 입자들의 크기와 형태에 따른 침강 특성의 영향을 검토하였다. 비구형입자를 포함하는 서스펜션의 침강에서 $log \mu_{c}$대 $log \varepsilon$로부터 얻은 기울기 지표n값은 형태와 크기가 다른 입자는 같은 부피 농도에서 흡착되는유체량이 달라져 입자크기가 감소하거나 불균일한 경우 증가하는 경향을 나타내었다. 실험결고 비구형입자를 포함하는 서스펜션의 침강에서 기울기 지표 $n_{i}$값에 대하여 $n_{i}=n(a+b/d_{v})$와 같은 식을 얻었으며 이때 a, b는 입자형태에 따른 상수이다.

• 한국공작기계학회논문집
• /
• 제18권2호
• /
• pp.214-220
• /
• 2009

The spindle is the main component in machine tools. The static and dynamic stiffness of the spindle directly affect the machining productivity and surface integrity of the workpiece. The static and dynamic stiffness of the spindle depend on the shaft size, bearing arrangement, bearing span length, and so on. Therefore, the selection of shaft size and bearing span length are important to improve the spindle stiffness. This paper presents the determination of shaft size and bearing span length in spindle design step. In order to select the optimal bearing and built-in motor locations with constraint conditions, the extreme vertices design was applied. The results show that extreme vertices design is usable for spindle design with design constraints.

• 한국작물학회지
• /
• 제38권2호
• /
• pp.112-116
• /
• 1993

우리나라에 자생하는 양하의 인공재배시 지하경의 키기와 피복재료가 주요생육 형질과 수량에 미치는 영향을 구명하고자 시험을 실시한 결과를 요약하면 다음과 같다. 1. 지하경이 클수록 출현이 빠르고 생육이 양호하였으며 9월 하순경 개화되었다. 2. 지하경 크기는 12～15cm에서 초장이 크고, 화뢰엽수가 많아 대량번식시킬 때 가장 알맞은 키기로 사료된다. 3. 멀칭은 짚피복이 초장이 크고 엽수가 많아 생육이 양호하고 화뢰수와 화뢰중이 무거워 수량이 증수되었다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 INTERNATIONAL SYMPOSIUM ON SOIL & GROUNDWATER ENVIRONMENT
• /
• pp.59-61
• /
• 2005

In Korea, hundreds of abandoned and closed coal and metallic mines are present in the steep mountain valleys due to the depression of the mining industry since the late 1980s. From these mines, enormous amounts of coal waste were dumped on the slopes, which causes sedimentation and acid mine drainage (AMD) to be discharged directly into streams causing detrimental effects on soil and water environments. A limestone slurry by-product (lime cake) is produced from the Solvay process in manufacturing soda ash. It has very fine particles, low hydraulic conductivities ($10^{-8}{\sim}10^{-9}cm/sec$), high pH, high EC due to the presence of CaO, MgO and $CaCl_2$ as major components, and traces of heavy metals. Due to these properties, it has potential to be used as a neutralizer for acid-producing materials. A field plot experiment was used to test the application of lime cake for reclaiming coal wastes. Each plot was 20 x 5 m (L x W) in size on a 56% slope. Treatments included a control (waste only), calcite ($CaCO_3$), and lime cake. The lime requirement (LR) for the coal waste to pH 7.0 was determined and treatments consisted of adding 100%, 50%, and 25% of the LR. The lime cake and calcite were also applied in either a layer between the coal waste and topsoil or mixed into the topsoil and coal waste. Each plot was hydroseeded with grasses and planted with trees. In each plot, surface runoff and subsurface water were collected. The lime cake treatments increased the pH of coal waste from 3.5 to 6, and neutralized the pH of the runoff and leachate of the coal waste from 4.3 to 6.7.

• 한국농공학회논문집
• /
• 제55권5호
• /
• pp.1-7
• /
• 2013

The objective of this research was to experimentally test the effect of tillage methods on the reduction of runoff, non-point source (NPS) pollution load, sediment and discharge under a rainfall simulation. We used the runoff plots of $5m{\times}30m$ ($L{\times}W$) in size. Experimental treatments were conventional tillage (CT), CT-rice straw bundle (CT-RSB) and two no-till (NT) plots; slope of 3 % or 8 % ; and rainfall intensity of 30 mm/hr. The rainfall simulation was conducted to three times. The time to initial runoff from NT plots was less than that from CT plots regardless of the slope and it was delayed about 65~90 % compared to that of CT plot. And sediment discharge of 8 % slope reduced to 55 % compared to CT plot. But the sediment discharge was not occurred at 3 % slope. The NT and CT-RSB methods have a great possibility of reducing runoff and NPS pollution loads. Runoff rate of NT plots was significantly lower than those of CT plot. The average NPS pollution loads of the NT plots and CT-RSB plot reduced about 55~80 % and 2.1~40 % compared to those of the CT plots, respectively. It was also shown that runoff and NPS pollution loads reduction by NT method could be very significant and contribute to improve the water quality of streams in agricultural regions. It was concluded that the use of NT method on agricultural fields could reduce soil erosion and muddy runoff significantly and help improve the water quality and aquatic ecosystem.

• Journal of the Korean Wood Science and Technology
• /
• 제31권2호
• /
• pp.16-23
• /
• 2003

간벌이 국산 잣나무 조림목의 용재품질에 미치는 영향을 구명함으로써 잣나무 인공조림목의 양질재 생산과 효율적 이용을 위한 기초자료를 제공하고자 수행된 본 연구에서 다음과 같은 결과를 얻었다. 강도의 간벌을 실시한 곳에서는 원목의 단위 m당 표면옹이 출현수가 감소하였고, 죽은 옹이의 비율도 감소하였으나 옹이의 크기는 커졌으며, 옹이의 상향각은 죽은옹이가 산옹이보다 컸다. 굽은 원목은 간벌을 하지 않은 곳보다 강도간벌을 실시한 곳에서 적게 출현하였고, 원주형질률은 강도간벌을 실시한 곳에서 높게 나타났으며 지상고 3.2 m 이하 부위의 원목에서 더욱 향상되었다. 무결점재면률은 무간벌구에 비해 강도간벌구에서 향상되었으며, 원목품등은 간벌을 강하게 실시한 경우일수록 높게 나타났다.

• 한국작물학회지
• /
• 제26권4호
• /
• pp.350-356
• /
• 1981

본 실험은 묘상용 Vinyl pot의 크기와 Vinyl pot당 육묘주수를 달리하여 향끽미종 잎담배인 소향으로 Vinyl pot당 육묘가능주수의 구명과 생육비절멸방안을 모색코자 실시한 결과를 요약하면 다음과 같다. 1. Vinyl pot가 클수록 이식묘의 주당 건물중, 변이계수 및 건물율은 증가하였으나 T/R율, 경쟁지수및 단위생산성은 감소하였다. 2. Pot당 육묘주수가 많을수록 변이계수, 경쟁지수 및 단위생산성은 증가하였으나 주당 건물중은 감소하였다. 3. 자상성약구와 가식구는 모두 4cm pot에서 3주, 5cm pot에서 5주까지 육묘가 가능하였고 자상성약육묘보다 가식육묘가 유리하였다. 4. 5cm pot당 5주씩 육묘하여 대조구(3.5cm pot에 1주 육묘)에 비하여 묘상면적 및 묘상자재를 60.9%, 이식노동력을 36.3% 절감되었다.