• 한국균학회지
• /
• 제38권2호
• /
• pp.120-124
• /
• 2010

본 시험은 재배과정 중 균상배지에서 분리한 세균들의 특성을 조사하여 버섯균의 생육 및 병원균과의 연관관계를 밝히고자 하였다. 정상적으로 버섯을 수확한 농가의 경우 버섯생육초기에 분리한 세균일수록 버섯균주에 대해 저해정도가 감소하였으나, 생육이 진행될수록 저해균의 수가 증가하였으나, 버섯 수확에 실패한 농가의 경우 반대의 경향을 보였다. 또한 합성배지에 분리세균을 도말한 후 느타리버섯 균의 생육을 조사한 결과 정상적 농가의 경우 살균 직후 보다 생육이 진행될수록 저해균의 수가 증가하였지만, 실패한 농가는 오히려 반대의 경향을 보였다. 그러나 톱밥배지에서는 버섯생육초기보다 후기에 분리한 세균이 저해하는 정도가 오히려 낮았다. 또한 이들 분리 세균은 분비성 물질을 통해서 버섯균의 생육과 증식에 영향을 미쳤다. 분리 미생물 중 세균성갈반병의 원인균인 Pseudomonas tolaasii을 강하게 억제하는 미생물은 거의 없었으며 소수의 균주에서 약한 길항력을 보였다. 그러나 세균성갈색무늬병을 일으키는 P. agarici에 대해서는 강한 억제력을 보이는 균주가 많이 존재하였으며, 푸른곰팡이병의 원인균인 Trichoderma harzianum을 강하게 억제하는 미생물도 배지내에 거의 존재하지 않았다. 이와 같이 배지내에는 다양한 미생물이 존재하고 이들 다양한 미생물과 버섯균의 상호작용에 대한 면밀한 연구가 이루어진다면 느타리버섯 재배과정 중 발생하는 다양한 문제점을 해결할 수 있는 좋은 방법이 될 수 있을것으로 생각된다.

• 자원리싸이클링
• /
• 제10권3호
• /
• pp.29-36
• /
• 2001

전기화학적 환원 반응을 이용하는 전기 분해에 의한 방법으로 중금속 폐수를 처리하여 금속성분을 회수하는데 있어 cyclic voltammetry를 적용하였다. 아연용액에서의 아연전극과 탄소전극에 대한 전기적 반응 특성은 voltammogram으로 확인할 수 있었으며 수중 아연이온 환원은 전위가 -0.76V 이하에서 반응이 일어나는 것을 알 수 있었다. 용액 중 아연이온의 산화와 환원으로 인해 형성되는 금속 특성은 X선 회절분석 결과를 통해서 확인할 수 있었으며, AFM 이용하여 구리판에 환원된 아연을 관찰할 수 있었다. 본 연구의 결과는 전기분해에 의한 폐수 중 중금속의 처리 및 회수에 있어 기초자료로 활용죌 수 있을 것으로 사료된다.

• 펄프종이기술
• /
• 제33권2호
• /
• pp.58-67
• /
• 2001

MOW (Mixed Office Waste) mainly consisted of photocopied paper is being recycled to produce tissue or fine paper products. Toner particles that are fused and set on paper surface in photocopying process turns into large and plate-shaped particles after repulping which prevents them to be removed effectively in flotation deinking. The immediate purpose of this study is to find the effective deinking technology that increases the recycling potential of photocopied papers for manufacturing tissue and fine paper products. In this study the effects of pulping temperature and the type of hydrophobic groups of nonionic surfactants on the deinking efficiency of photocopied paper has been investigated. Particle size distribution of the toner particles after pulping and flotation, brightness, yield and ash removal were investigated. The size of toner particles after pulping increased as the pulping temperature was increased. When pulping at the low temperature finer toner particles were generated, however, greater amount of toner particles was found to attach to the fiber. When the pulping temperature was greater than Tg of the toner, the amount of coarse hairy particles increased. When nonionic surfactants with a double bond in hydrophobic groups were used, toner removal efficiency, brightness and ash removal were increased. As the addition level of surfactant was increased, yield decreased rather sharply without improving brightness.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.3122-3122
• /
• 2001

Documented quality control plays a vital role I the production of technical “Depth filter” sheets used in industries such as Beverage and pharmaceutical. Depth filter sheets which can be up to several millimeters thick are stacker in plate and frame filter systems. They are the core of stainless steel filter systems which can be up to several meters high. FT-NIR Spectroscopy has many potential applications in the whole production line of filter sheets. Raw materials such as different types of cellulose pads, white powdery fillers (e.g. Kieelgur, Perlite) or liquid chemicals such as wet-strength agents we, with the help of NIR, easy to identify. NIR can also determine physical parameters such as particle size, essential for the filtration behavior. FT-NIR can be used for the quality parameters of the final product. Moisture and permeability can be determined, and with the help of the speed of this NIR method it is possible to correct possible faults quickly in the production process. Waste production can be minimized which is good for both the product profitability and the environment. Further tests have shown that it is also possible to use NIR on-line in the production area, to check the concentrations and the homogeneity of the paper suspension consisting of cellulose fibres, fillers and additives.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2009년도 특별논문집
• /
• pp.123-129
• /
• 2009

Ship painting procedures can be divided into two categories; Out-shell plate painting of the hull and the interior painting of each double gull blocks. It is really hard to apply standardized and automated operations to the latter because the double hull blocks contains a variety of complicated supportive materials and pipes to strengthen the ship structure. In addition their poor working conditions cause painting workers to avoid working in them, resulting in the waste of paints and additional pollution issues. So this research, successfully focused on overcoming the difficulties in working in the complicated blocks and the tough working conditions introduces the main details of automatic equipment systems and their transfer algorism which show how the equipment paints the inner sides of a longitudinal stiffener and moves to another automatically.

• 한국안전학회지
• /
• 제20권2호
• /
• pp.98-104
• /
• 2005

Saw dust concrete f3r finding out insulation characteristic was tested using test plate $30cm{\times}30cm{\times}5cm$. basically, molds f3r the test of compressive, tensile, normal without sawdust, $0.05\%,\;0.1\%,\;0.2\%,\; 0.4\%,\;0.6\%,\;0.8\%,\;1.0\%,\;1.2\%,\;1.4\%,\;1.6\%,\;1.5\%,\;2.0\%$, mixing proportion. heat conductivity of the saw dust concrete mixed with the above proportion was taken in this study. Thermal conduction of normal concrete depends on mixing proportion strength aggregate character, water content. all these items are specified here in fables. $1.8\%\~2.0\%$ saw-dust mising concrete shows as the faction as normal insulation material has its function. and the higher saw-dust mixing rate becomes, the thermal conduction becomes the less Then, the conclusions are that saw-dust using concrete has better insulation function than normal concrete.

• Journal of Biosystems Engineering
• /
• 제43권1호
• /
• pp.14-20
• /
• 2018

Purpose: The purpose of this study was to investigate the performance of a vacuum pyrolysis system, to analyze bio-oil characteristics, and to examine the applicability for farm-scale capacity. Methods: The biomass was pyrolyzed at 450, 480, and $490^{\circ}C$ on an electric heat plate in a vacuum reactor. The waste heat from the heat exchanger of the reactor was recycled to evaporate water from the bio-oil. The chemical composition of the bio-oil was analyzed by gas chromatography-mass spectrometry (GC-MS). Results: According to the analysis, the moisture content (MC) in the bio-oil was approximately 9%, the high heating value (HHV) was approximately 26 MJ/kg, and 29 compounds were identified. These 29 compounds consisted of six series of carbohydrates, 17 series of lignins, and six series of resins. Conclusions: Owing to low water content and the oxygen content, the HHV of the bio-oil produced from the vacuum reactor was higher by about 6 MJ/kg than that of the bio-oil produced from a fluidized bed reactor.

• Environmental Engineering Research
• /
• 제19권4호
• /
• pp.387-393
• /
• 2014

The purpose of this study is to evaluate integrated anaerobic hydrogen fermentation and membrane bioreactor (MBR) for on-site domestic wastewater treatment and resource recovery. A synthetic wastewater (COD 17,000 mg/L) was used as artificial brown water which will be discharged from urine diversion toilet and fed into a continuous stirred tank reactor (CSTR) type anaerobic reactor with inclined plate. The effluent of anaerobic reactor mixed with real household grey water (COD 700 mg/L) was further treated by MBR for reuse. An optimum condition maintained in anaerobic reactor was HRT of 8 hrs, pH 5.5, SRT of 5 days and temperature of $37^{\circ}C$. COD removal of 98% was achieved from the overall system. Total gas production rate and hydrogen content was 4.6 L/day and 52.4% respectively. COD mass balance described the COD distribution in the system via reactor byproducts and effluent COD concentration. The results of this study asserts that, anaerobic hydrogen fermentation combined with MBR is a potent system in stabilizing waste strength and clean hydrogen recovery which could be implemented for onsite domestic wastewater treatment and reuse.

• Journal of Nutrition and Health
• /
• 제31권9호
• /
• pp.1498-1507
• /
• 1998

The purposes of this study were to : a) examine the current foodservice management practices of twenty-one seniors centers in charge of hoke-delivered meal programs, b) evaluate the attitudes of one hundred and ten recipients of meal service program, and c) provide feedback for the efficient and effective foodservice management for the elderly. Statistical data analysis was completed using the SAS package program for descriptive analysis, T-test, and ANOVA. The results of quantitative analysis indicated that the costs of meals, containers and special foods were mostly dependent on the support from local government(Seoul city). The centers where the volunteers were over seventy five p ercent of the workers were frtty-eight percent and sixty-seven percent of the subjects in food preparation and food delivery to the homebound clients, respectively. Meal preparation and food purchasing were mainly practiced by social welfare worker. Standardized recipes were not developed and meal preparation was controlled under the cook' and volunteers' experiences. The survey results of recipients who participated the home-delivered meals program showed that the mean of meal satisfaction score was rated over three point five in the five-point scale. There were significant differences between dependent variables(volunteer's kindness, plate waste, menu variety) and independent variables(sex, receiving periods and family type of the subjects). (Korean J Nutrition 31(9) : 1498-1507, 1998)

• Journal of Nutrition and Health
• /
• 제31권9호
• /
• pp.1508-1521
• /
• 1998

The purpose of this study was to analyze and evaluate the menu served in business & industry contract foodservice by assessing nutritional value and by using menu-engineering technique from managers' view point. CAN-Pro program and Kasavana k Smith's Menu Engineering technique were used to evaluate the nutritional value and menu analysis, respectively. The data were analyzed using the SAS package program for descriptive analysis, t-test, ANOVA, and Pearson Correlation Analysis. As the result of nutritional value of lunch menu, all nutrient contents per meal were higher than a third of Korean recommended dietary allowances(RDA), But there was no problem when 20∼30% of plate waste was considered. Carbohydrate : Protein fat ratio was 62.7 : 16.4 : 20.8. Because animal : vegetable source ratios of protein, fat, calcium, iron were 44 : 56, 42 : 58, 22 : 78, 24 : 76, respectively, animal sources of calcium and iron needed to be supplemented. Plural set menus of A site were classified as STAR, PUZZLE, PLOWHORSE, DOG by Menu engineering technique. Set menus and soups & pot-stews among cafeteria menus in C site were operated properly without DOG and PUZZLE item. Side dishes of fishes, meats 8t eggs among cafeteria menus in C site were, for the most part, classified as STAR item, and side dishes of vegetables & salads and noodles among cafeteria menus in C site were STAR, PUZZLE, and DOG items. (Korean J Nutrition 31(9) : 1508-1521, 1998)