• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.7
• /
• pp.17-24
• /
• 1998

We proposed a novel bondwire inductor buried in plastic package for low cost MMIC and characaterized the electrical perofmrance in a wide frequency range using the full-wave analysis of finite element method(FEM), and then we fabricated and measured the scale-up model in order to prove the characteristics. Th ebondwire inductor has higher quality factor and higher cutoff frequency than the conventional spiral inductor designed n the same area as the bondwire inductor. Since the air-bridge process is not requried for the bondwire inductor, it is very suitable for low cost plastic-packaged MMIC production. The bondwire inductor has the field distribution localized around the bondwire inductor and hence is more compatible to the crosstalk problems.

• Journal of Welding and Joining
• /
• v.18 no.4
• /
• pp.64-69
• /
• 2000

Reliability of PBGA(Plastic Ball Grid Array) package is very weak compared with normal plastic packages. The reliability are the lower resistance to popcorn cracking, which is reduced by moisture absorption in PCB(Printed Circuit Board). This paper adapts plasma treatment process and analyzes their effect. The contents of C and Cl decrease after plasma treatment but O, Ca and N relatively increase. The Plasma treatment to improve the adhesion between EMC(Epoxy Molding Compound) and PCB(solder mask). The degree of improvement was over 100% Max., which is depend on the properties of EMC. Ar+H$_2$as plasma gas show good result. There is a little difference in RF power and treatment time.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.18 no.34
• /
• pp.35-42
• /
• 1995

In the plastic extrusion process, product quality is influenced by work condition for temperature of cylinders and dies. The work conditions are various, so it is difficult to standardization of the work conditions. Therefore, the work conditions are depended on the workers of experience and skill. In the plastic extrusion process, it has five control heating points on the cylinder and three control heating points on the die. In addition, there is one control point on the extrusion process. It is extrusion speed. In this case, we don't know how these affect product quality. We structure the multiple linear regression equation with the temperature of cylinders and dies as independent variables and the product weight as dependent variable. We solve this equation using statistic computer package named Juse-Qcas.

• Korean Journal of Food Science and Technology
• /
• v.41 no.3
• /
• pp.272-277
• /
• 2009

In this research, three dimensional mathematical models were developed to predict the shelf life of tofu packaged in a semi-rigid plastic container. A model combining oxygen transfer through the package and oxygen consumption within the package was considered. According to the results, the model simulations estimated that the number of microorganisms in the filled water was higher than that in the tofu, suggesting the shelf life of packaged tofu was not affected by the number of microorganisms in the tofu product, but rather by the number of organisms in the filled water. Additionally, the effects of the physical properties of the packaging material, such as oxygen permeability through the package, oxygen diffusion coefficient, the initial oxygen concentration in the filled water, and the depth of the filled water in the packaged tofu, were also observed.

• Food Science and Biotechnology
• /
• v.14 no.5
• /
• pp.694-697
• /
• 2005

The objectives of this study were to compare the quality changes of cheese slices individually packed in four kinds of edible pouches in order to select the most suitable variety for individual packaging. The edible Z2 pouch (zein with oleic acid) was selected as maintaining the best cheese qualities based on the physical and microbiological changes undergone by the samples over 4-week storage at $5^{\circ}C$. The cheese sample individually packed in Z2 inner edible pouch and repacked in a plastic (OPP/LLDPE) outer pouch was not significantly different in physical and microbiological changes from that individually packed in a plastic (OPP/LLDPE) inner pouch and repacked in a plastic (OPP/LLDPE) outer pouch. Therefore, it may be concluded on the basis of the physical and microbiological evidence that the Z2 edible pouch can be used as an inner package for cheese slices when it is inside a plastic outer pouch.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.19 no.2
• /
• pp.103-108
• /
• 2013

Packaging of solar salts produced in Korea and Japan were evaluated and compared each other in terms of packaging design such as package types, colors and graphics. The standing pouch type in plastic film was most popular for the Korean salts regardless of the package capacity. But the same type was common only for the lower package capacity of 300 g or less while the plastic film pouch was prevalent for the higher capacity for the Japanese salts. White and brown were dominant colors for the Korean solar salts reminding us of salt farms and the foreshore respectively and strengthening its color identity. White, blue and red were used for the dominant, assort and accent colors respectively for the Japanese salt packaging. Salt farmers and the foreshore are often represented as the main package graphics for the Korean solar salts while the wave symbolising the sea was found frequently for the Japanese ones. The word of 'Shinan' was involved the most in the brand names of the Korean salts and the sea was appeared very often in those of the Japanese ones.

• Journal of the Microelectronics and Packaging Society
• /
• v.13 no.4
• /
• pp.17-25
• /
• 2006

Thermo-mechanical behavior of flip-chip plastic ball grid array (FC-PBGA) packages are characterized by high sensitive $moir\'{e}$ interferometry. $Moir\'{e}$ fringe patterns are recorded and analyzed for several temperatures. Deformation analysis of bending displacements of the packages and average strains in the solder balls for both single and double-sided package assemblies are presented. The bending displacement of the double-sided package assembly is smaller than that of the single-sided one because of its symmetric structure. The largest effective strain occurred at the solder ball located on the edge of the chip and its magnitude of the double-sided package assembly is greater than that of single-sided one by 50%.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.10 no.1
• /
• pp.1-6
• /
• 2004

Amount of residual ink solvent on the packaging materials from Korea, Japan and Europe was measured and compared. The amount of packaging materials from Korea was much higher than that of Japan and Europe. To reduce the residual amounts of ink solvent, aging condition of printed packaging materials including aging time and temperature was modified and evaluated. Aging with high temperature and short time ($60^{\circ}C$ and 24 hours) was more effective for reduction of residual amount of ink solvent than that with low temperature and long time. To find out change of reduction pattern of residual amount of solvent according to plastic packaging material, several monolayer and multilayer packaging materials were selected. Among the monolayer packaging materials, the amount of EVOH and PET was lower than that of polyolefin plastic film including PE and PP. PP/EVOH/PET among the selected multilayer film showed the lowest amount of residual ink solvent on food packaging materials. Result of this research revealed that the residual amount of ink solvent can be reduced by proper selection of aging condition with and by appropriate application of mutilayer plastic film.

• Fashion & Textile Research Journal
• /
• v.19 no.1
• /
• pp.30-39
• /
• 2017

This study examines on the relationship of appearance instrumentality and appearance-related variables (appearance concern, appearance management behavior) of college students. Questionnaires were administered to 313 college students living in Daegu. The SPSS 20.0 package was utilized for data analysis which included frequency analysis, Cronbach's ${\alpha}$, factor analysis, cluster analysis, cross tabulation analysis and t-test. Three factors of appearance instrumentality(love relationship, social achievement, interpersonal relationship), two groups of appearance concern(high, low) and five factors of appearance management behavior(skin care/cosmetics usage behavior, body management behavior, plastic surgery behavior, hair management behavior, fashion management behavior) were utilized for the problem analysis of the study. The results of this study were: First, there was no significant differences in the appearance concern group according to appearance instrumentality. Second, appearance instrumentality had a significant differences on appearance management behavior. Social achievement showed a significant differences in plastic surgery behavior. And love relationship showed a significant differences on plastic surgery behavior and fashion management behavior. Third, the appearance concern had a significant differences on all of appearance management behavior. High group of appearance concern showed a higher average than low group of appearance concern in fashion management behavior, skin care/cosmetics usage behavior, hair management behavior, plastic surgery behavior, body management behavior.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.12
• /
• pp.73-85
• /
• 1997

The rolling force and roll deformation behavior in the twin roll type strip continuous casting process has been computed to estimate the thermal charcteristics of a caster roll. To calculation of rolling force, the relationship between flow stress and strain for a roll material and casting alloy are assumed as a function of strain-rate and temperature because mechanical properties of a casting materials depends on tempera- ture. The three dimensional thermal dlastic-plastic analysis of a cooling roll has also been carried out to obtain a roll stress and plastic strain distributions with the commercial finite element analysis package of ANSYS. Temperature fields data of caster roll which are provided by authors were used to estimated of roll deformation. Roll life considering thermal cycle is calculated by using thermal elastic-plastic analysis results. Roll life is proposed as a terms of a roll revolution in the caster roll with and without fine failure model on the roll surface. To obtain of plastic strain distributions of caster roll, thermomechan- ical properties of roll sleeve with a copper alloy is obtained by uniaxial tensile test for variation of temperature.