• 한국전산구조공학회논문집
• /
• 제24권6호
• /
• pp.609-616
• /
• 2011

콘크리트와 철근의 재료모델 그리고 스톡앵커의 낙하거리 변화에 따른 아치형 해저 케이블 보호구조물의 충돌특성을 분석하였다. 콘크리트의 재료모델로는 plastic kinematic모델과 Johnson-Holmquist Concrete모델이, 철근의 재료모델은 선형탄성모델과 plastic kinematic모델이 고려되었다. 스톡앵커의 무게는 2ton이며 낙하거리는 3, 5, 8.83m로 선정되었다. 충돌해석을 위해 유한요소해석 프로그램 ANSYS가 사용되었고, 해석시간 단축을 위해 낙하거리를 초기속도로 변화하는 기법을 사용하였다. 낙하거리 변화에 따른 재료모델의 민감성을 분석한 결과, 콘크리트의 충돌응답은 콘크리트모델에 민감하고 철근의 충돌응답은 일차적으로 철근모델에 이차적으로 콘크리트모델에 민감함을 알 수 있었다.

• 소성∙가공
• /
• 제14권4호
• /
• pp.327-337
• /
• 2005

In the present work, the two back stress kinematic hardening models are proposed by combining Armstrong-Frederick, Phillips and Ziegler's hardening rules. Simple combination of hardening rules using simple rule of mixtures results in various evolutions of the kinematic hardening parameter. Using the combined hardening models the ultimate back stress fur the present models is also derived. The stress rate is co-rotated with respect to the spin of substructure due to the assumption of kinematic hardening rule in finite deformation regime. The work piece under consideration is assumed to consist of the elastic and the rigid plastic deformation zone. Then, the J2 deformation theory is facilitated to characterize the plastic deformation behavior under various loading conditions. The plastic deformation localization behaviors strongly depend on the constitutive description namely back stress evolution and its hardening parameters. Then, the analysis for Swift's effects under the fixed boundaries in axial directions is carried out using simple shear deformation.

• 대한조선학회논문집
• /
• 제50권1호
• /
• pp.41-48
• /
• 2013

Several fatigue damages have recently been reported which cannot be resolved in the context of the existing fatigue design procedure, and they are suspected to be the cracks induced by the low cycle fatigue mechanism. To tackle the problem, a series of material tests together with fatigue tests have been carried out, and elasto-plastic notch strain analysis using nonlinear kinematic hardening model has been performed. The cyclic stress-strain curves are obtained and the nonlinear kinematic hardening model was calibrated based on the obtained material data. Also, the fatigue test with non-load-carrying cruciform fillet welded joint has been performed in low cycle fatigue regime. Then, the notch strain analyses have been carried out to find the precise elasto-plastic behavior of the material at the notch root of the cruciform joint. The variation of the material property from the base metal via HAZ up to the weld metal was taken into account using spatial variation of the material property. Then the detail elasto-plastic behavior of the welded joint subjected to the repeated cyclic loading has been investigated further through the comparison with the prediction with Neuber's rule. The calibration of the nonlinear kinematic hardening model and nonlinear notch strain analyses have been performed using the commercial FE program ABAQUS.

• 소성∙가공
• /
• 제17권3호
• /
• pp.161-169
• /
• 2008

In the present work, the two-back stress model is proposed and continuum damage mechanics (CDM) is incorporated into the plastic constitutive relation in order to describe the plastic deformation localization and the damage evolution in a deforming continuum body. Coupling between damage mechanics and isothermal rate independent plasticity is performed using the kinematic hardening rule, which in turn is formulated by combining the nonlinear Armstrong-Frederick rule and the Phillips rule. The numerical analyses are carried out within h deformation theory. It is noted that the damage evolution within a work piece accelerates the plastic deformation localization such that the material with lower hardening exponent results in a rapid shear band formation. Moreover, the results from the numerical analysis reflected closely with the micro-structures around the fractured regime. The effects of the various hardening parameters on deformation localization are also investigated. As the nonlinear strain rate description in the back stress evolution becomes dominant, the strain localization becomes intensified as well as the damage evolution.

• 소성∙가공
• /
• 제17권1호
• /
• pp.19-26
• /
• 2008

In the present work, the ratcheting behavior under uniaxial cyclic loading is analyzed. A comparison between the published and the results from the present model is also included. In order to simulate the ratcheting behavior, Two-Back Stress model is proposed by combining the non-linear Armstrong-Frederick rule and the non-linear Phillips hardening rule based on kinematic hardening equation. It is shown that some ratcheting behaviors can be obtained by adjusting the control material parameters and various evolutions of the kinematic hardening parameter can be obtained by means of simple combination of hardening rules using simple rule of mixtures. The ultimate back stress is also derived for the present combined kinematic hardening models.

• 한국지반공학회논문집
• /
• 제21권8호
• /
• pp.27-35
• /
• 2005

액상화에 따른 지반의 과도한 변형으로 인한 피해가 자주 발생되고 있다. 그에 따른 지반의 움직임을 예측하기 위해서는 유효응력 개념에 기초한 수치해석 기법이 요구되어 진다. 본 연구에서는 지진 및 유사한 반복 하중에 따른 수압의 상승을 예측할 수 있는 연성(fully coupled) 유효응력 구성모델인 UBCSAND를 제안하였다. 제안된 모델은 간단한 완전탄소성모델인 Mohr-Coulomb을 변형한 형태로 마찰각(friction angle)과 팽창각(dilation angle)을 점진적으로 증가시킴으로써, 기존의 파괴상태내에서도 연속적인 소성변형 발생을 표현할 수 있다. 항복함수는 전단응력과 평균응력의 비인 $(\sigma'_1-\sigma'_3)/(\sigma'_1-\sigma'_3)$로 나타내며, 응력도의 원점에서 시작하는 무한개의 방사선을 의미한다. 따라서, Mohr-Coulomb의 파괴면과 같은 형태의 무수한 항복면을 가진다. 소성 경화법칙은 등방경화(isotropic hardening)와 이동경화(kinematic hardening)를 혼합한 형태를 이루고 있다. 재하(loading) 및 재재하(reloading)시에는 연속적인 소성 변형이 일어나나, 제하(unloading)시에는 탄성변형을 가정하였다. 제안된 모델은 느슨한 Fraser River 모래를 이용한 직접단순전단시험(Direct simple shear test)결과와 비교하여 검증하였다.

• 대한조선학회논문집
• /
• 제57권1호
• /
• pp.8-14
• /
• 2020

The implosion phenomena of pressure vessels operating in deep water under extremely high external pressure have been well known. The drastic energy release to ambient field in the form of pressure pulse is accompanied with catastrophic collapse of shell structure. Such a proximity shock wave could be a serious threat to the structural integrity of adjacent submerged body and several suspected accidents have been reported. In this study, basic research for the occurrence and development of shock wave due to implosion was carried out. The mechanism of pressure pulse generation and energy dissipation were investigated, and a simplified kinematic model to approximate the collapse modes of circular tubes which can be generated by external pressure and implosion was examined. Using the simplified kinematic model, the process of energy dissipation was formulated, and the magnitude of released pressure shock wave was estimated quantitatively. To investigate the validity of developed kinematic model and shock wave estimation process, the results from a nonlinear FE analysis code and collapse test carried out using pressure chamber were compared with the results from the developed kinematic model.

• 대한기계학회논문집A
• /
• 제27권9호
• /
• pp.1562-1570
• /
• 2003

The prediction of the inelastic behavior of the structure is an essential part of reliability assessment procedure, because most of the failures are induced by the inelastic deformation, such as creep and plastic deformation. During decades, there has been much progress in understanding of the inelastic behavior of the materials and a lot of inelastic constitutive equations have been developed. The complexity of these constitutive equations generally requires a stable and accurate numerical method. The radial return mapping is one of the most robust integration scheme currently used. Nonlinear kinematic hardening model of Armstrong-Fredrick type has recovery term and the direction of kinematic hardening increment is not parallel to that of plastic strain increment. In this case, The conventional radial return mapping method cannot be applied directly. In this investigation, we expanded the radial return mapping method to consider the nonlinear kinematic hardening model and implemented this integration scheme into ABAQUS by means of UMAT subroutine. The solution of the non-linear system of algebraic equations arising from time discretization with the generalized midpoint rule is determined using Newton method and bisection method. Using dynamic yield condition derived from linearization of flow rule, the integration scheme for elastoplastic and viscoplastic constitutive model was unified. Several numerical examples are considered to demonstrate the efficiency and applicability of the present method.

• 한국해안·해양공학회논문집
• /
• 제28권1호
• /
• pp.7-12
• /
• 2016

본 연구에서는 선박충돌로부터 교량을 방호하는 파일형 선박충돌방호공과 충돌선박의 간이충돌모델을 개발하고 이를 검증하였다. 선박은 선수의 비선형반력을 고려하여 모델링하였다. 충돌방호공의 모델은 파일에서 상부슬래브의 하단과 지중에 2개의 소성힌지가 발생하는 것으로 구성하였다. 충돌중 발생하는 운동에너지와 위치에너지 및 변형에너지를 고려하여 운동방정식을 유도하고 이를 해석하는 시스템을 개발하였다. 선박과 구조물에 대한 정밀 충돌해석을 수행하여 개발된 간이모델이 충돌거동을 정확히 모사할 수 있음을 보였다.

• 한국강구조학회 논문집
• /
• 제14권6호
• /
• pp.735-746
• /
• 2002

소성이론이의 연구방향은 일반적으로 두 가지 대별된다. 첫 째는 강재의 소성변형을 적절하게 나타내는 응력-변형도 관계를 정립하는 것이고, 둘 째는 위의 과정을 이용한 기법을 개발하고 구조물을 설계하는 것이다. 소성이론을 연구하는데 한 가지 중요한 문제는 복잡한 하중이력에 대하여 소성영역에서 경화재료의 거동을 묘사하는 것이다. 또한 구조물이 강한 지진이나 바람하중을 받을 경우, 비례하중보다는 복잡한 불비례하중에 의하여 영향을 받는다. 따라서 소성이론과 강재의 소성거동에 대한 연구는 불비례하중의 거동과 영향을 나타낼 수 있어야 한다. 지금까지 많은 연구자들이 이 분야에서 이론을 발표하였고, 지금도 계속하여 새로운 소성모델 연구를 하고 있다. 본 논문은 지금까지 가장 많이 쓰이고 있는 소성 모델을 two-surface 소성모델을 중심으로 분석하고 각 소성모델의 특징과 문제점을 파악하였고 앞으로의 연구과제를 제안하였다.