• 제목/요약/키워드: plasma synthesis

검색결과 466건 처리시간 0.029초

DLC박막 증착시 전처리 가스 종류와 유량 변화에 따른 효과

  • 백일호;이원백;홍병유;이준신
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2009년도 제38회 동계학술대회 초록집
    • /
    • pp.247-247
    • /
    • 2010
  • DLC(diamond-like carbon)는 비정질 고상 탄소의 하나로 다이아몬드의 유사한 높은 경도, 내마모성, 윤활성, 전기절연성, 화학적 안정성을 가지고 있는 재료이다. 이러한 우수한 특성 때문에 DLC는 박막의 형태로 여러 종류의 보호코팅에 많이 응용되고 있다. DLC의 광범위한 응용에 있어 가장 큰 문제점은 박막이 갖는 높은 잔류응력과 이에 따른 기판과의 낮은 접착성으로 알려져 있다. 최근 연구에 의하면, plasma pre-treatment를 통해 PTFE기판에 DLC박막의 adhesion strength를 증진 시킬 수 있다고 보고하였다. 또한 ion beam technique를 이용하여 잔류응력을 줄이고 기판과의 접착력을 높일 수 있다는 것도 보고 되었다. 이에 기인하여 pre-treatment가 DLC합성에 잔류응력을 낮추고 기판과의 접착성을 높이는 효과를 보일 것이라고 가정하고 연구하였다. 본 연구에서 pre-treatment가 Diamond-like Carbon의 stainless steel 합성시 stress와 adhesion에 어떤 효과가 있는지 알아보기 위해, pre-treatment시와 synthesis of DLC film시에 13.56MHz 150W RF플라즈마 화학기상 증착 (RF-PECVD) 법을 통해 합성되었다. pre-treatment시에 H2(80 sccm), O2(10 sccm), N2(20 sccm)의 가스 종류를 다르게 하였고, synthesis of DLC film시에는 CH4 (20 sccm), H2 (80 sccm)가스의 유량을 고정하였다. 합성된 DLC 박막은 Contact Angle Analyze, Raman spectroscopy, Scratch tester를 이용하여 접촉각, D peak Position, G peak Position, ID/IG ratio, 접착력을 측정하였다.

  • PDF

Pharmacokinetics of Propentofylline and the Quantitation of Its Metaolite Hydroxypropentofylline in Human Volunteers

  • Kwon, Oh-Seung;Chung, Youn-Bok;Kim, Min-Hee;Hahn, Hoh-Gyu;Rhee, Hee-Kyung;Ryu, Jae-Chun
    • Archives of Pharmacal Research
    • /
    • 제21권6호
    • /
    • pp.698-702
    • /
    • 1998
  • Propentofylline (PPF, 3-methyl-1-(5-oxohexyl)-7-propylxanthine) has been reported to be effective for the treatment of both vascular dementia and dementia of the Alzheimer type. The pharmacological effects of PPF may be exerted via the stimulation of nerve growth factor, increased cerebral blood flow, and inhibition of adenosine uptake. The objectives of this experiment are to determine the kinetic behavior of PPF, to identify, and to quantify its metabolite in human. Blood samples were obtained from human volunteers following oral administration of 200mg of PPF tablets. For the identification and quantification of the metabolite, 3-methyl-1-(5-hydroxyhexyl)-7-propylxanthine (PPFOH), PPFOH was synthesized and identified by gas chromatography/mass spectroscopy (GC/MS) and $^1H$-nuclear magnetic resonance spectroscopy. The molecular weight of synthesized metabolite is 308 dalton. The PPF and PPFOH in plasma were extracted with diethyl ether and identified by electron impact GC/MS. The plasma concentrations of PPF and PPFOH were determined by gas chromatography/nitrogen phosphorus detector in plasma and their pharmacokinetic parameters were determined. The mean half-life of PPF was 0.74 hr. The areas under the curve (AUCs) of PPF and PPFOH were 508 and 460ng.hr/ml, respectively. $C_{max}$ of PPF was about 828.4ng/ml and the peak concentration was achieved at about 2.2 hr ($T_{max}$). These results indicate that PPF is rapidly disappeared from blood due to extensive metabolism into PPFOH.

  • PDF

은나노와이어 함침 유연 스펀지 전극 제조 (Fabrication of flexible sponge electrodes using Ag nanowires)

  • 박경렬;유세훈;류정호;민성욱
    • 한국결정성장학회지
    • /
    • 제30권5호
    • /
    • pp.189-193
    • /
    • 2020
  • 최근 웨어러블 센서를 구현하기 위한 유연전극을 제조하기 위한 다양한 방법들이 논의되고 있다. 현재 개발되고 있는 웨어러블 센서기기는 피부의 신축성에 따라 잘 늘어나야 하고, 신축성을 부여하기 위해, 다양한 고분자 기판이 사용되어지고 있다. 따라서, 본 논문에서는 스펀지 기반 신축성 기판에 고탄성의 은나노와이어 전극을 형성하고 신축의 정도에 따른 전기적 특성 평가를 진행하였다. 제조 방법은 습식합성법을 이용하여 은나노와이어를 성장시켰고 플라즈마 표면처리된 폴리우레탄 기반의 스펀지에 함침시킨 후 저온에서 열처리를 하였다. 특히, 스펀지의 플라즈마 표면처리는 은나노와 이어의 균일한 코팅을 가능케 하였다. 유연 스펀지 전극은 160회 이상의 반복 인장-수축 사이클에서 신뢰성있는 전기 저항변화를 보여주었다.

Differential Expression of Metabolism-related Genes in Liver of Diabetic Obese Rats

  • Seo, Eun-Hui;Park, Eun-Jin;Park, Mi-Kyoung;Kim, Duk-Kyu;Lee, Hye-Jeong;Hong, Sook-Hee
    • The Korean Journal of Physiology and Pharmacology
    • /
    • 제14권2호
    • /
    • pp.99-103
    • /
    • 2010
  • The Otsuka Long-Evans Tokushima Fatty (OLETF) rat, a model of spontaneous type 2 diabetes (T2D), develops hyperglycemic obesity with hyperinsulinemia and insulin resistance after the age of 25 weeks, similar to patients with noninsulin-dependent diabetes mellitus (DM). In the present study, we determined whether there are differences in the pattern of gene expression related to glucose and lipid metabolism between OLETF rats and their control counterparts, Long-Evans Tokushima (LETO) rats. The experiment was done using 35-week-old OLETF and LETO rats. At week 35 male OLETF rats showed overt T2D and increases in blood glucose, plasma insulin, plasma triglycerides (TG) and plasma total cholesterol (TC). Livers of diabetic OLETF and LETO rats also showed differences in expression of mRNA for glucose and lipid metabolism related genes. Among glucose metabolism related genes, GAPDH mRNA was significantly higher and FBPase and G6Pase mRNA were significantly lower in OLETF rats. For lipid metabolism related genes, HMGCR, SCD1 and HL mRNA were substantially higher in OLETF rats. These results indicate that gluconeogenesis in OLETF rats is lower and glycolysis is higher, which means that glucose metabolism might be compensated for by a lowering of the blood glucose level. However, lipid synthesis is increased in OLETF rats so diabetes may be aggravated. These differences between OLETF and LETO rats suggest mechanisms that could be targeted during the development of therapeutic agents for diabetes.

Spark Plasma Sintering 법으로 제조한 CoSb3 Skutterudite계 열전소재의 n형 첨가제 효과 (Effect of n-type Dopants on CoSb3 Skutterudite Thermoelectrics Sintered by Spark Plasma Sintering)

  • 이재기;최순목;이홍림;서원선
    • 한국재료학회지
    • /
    • 제20권6호
    • /
    • pp.326-330
    • /
    • 2010
  • $CoSb_3$ Skutterudites materials have high potential for thermoelectric application at mid-temperature range because of their superior thermoelectric properties via control of charge carrier density and substitution of foreign atoms. Improvement of thermoelectric properties is expected for the ternary solid solution developed by substitution of foreign atoms having different valances into the $CoSb_3$ matrix. In this study, ternary solid solutions with a stoichiometry of $Co_{1-x}Ni_xSb_3$ x = 0.01, 0.05, 0.1, 0.2, $CoSb_{3-y}Te_y$, y = 0.1, 0.2, 0.3 were prepared by the Spark Plasma Sintering (SPS) system. Before the SPS synthesis, the ingots were synthesized by vacuum induction melting and followed by annealing. For phase analysis X-ray powder diffraction patterns were checked. All the samples were confirmed as single phase; however, with samples that were more doped than the solubility limit some secondary phases were detected. All the samples doped with Ni and Te atoms showed a negative Seebeck coefficient and their electrical conductivities increased with the doping amount up to the solubility limit. For the samples prepared by SPS the maximum value for dimensionless figure of merit reached 0.26, 0.42 for $Co_{0.9}Ni_{0.1}Sb_3$, $CoSb_{2.8}Te_{0.2}$ at 690 K, respectively. These results show that the SPS method is effective in this system and Ni/Te dopants are also effective for increasing thermoelectric properties of this system.

A Study of Mechanism Involved in Cadmium-induced Platelet Aggregation

  • 송철수;홍기환
    • 대한약리학회지
    • /
    • 제20권1호
    • /
    • pp.41-46
    • /
    • 1984
  • 카드뮴중독으로 혈소판응집이 항진되어 고혈압 또는 동맥경화증이 발생한다는 연구보고를 감안하여 가토와 흰쥐의 생체내 실험으로서 미세혈전의 형성, Malondialdehyde(MDA) 및 thromboxane $B_2(TXB_2)$치에 미치는 카드뮴의 효과를 검토하고, in vitro실험으로 카드뮴을 처치한 가토 대동맥절편이 혈소판응집에 미치는 영향을 관찰하였으며, prostacyclin의 합성능력을 측정하여 그 결과를 다음과 같이 요약하였다. 1)Cadmium chloride 2mg/kg을 매주 동물의 복강내에 주입하였을 때 미세혈전형성이 증가되었다. 2) 카드뮴 중독동물의 platelet-rich plasma (PRP)는 MDA와 $TXB_2$형성이 정상동물에서 보다 현저히 증가되었다. 3) 카드뮴을 중독시킨 가토의 platelet-poor plasma (PPP)에서의 lipid peroxide치는 대조군과 차이가 없었다. 4) In vitro 실험으로, 가토대동맥 절편에서의 6-keto-$PGF_{1{\alpha}}$의 생성은 카드뮴 농도에 비례하여 억제되었고 이때 혈소판 응집률의 증가와 평행하였다. 5) 이상의 결과로서 카드뮴은 동맥내피세포에서 prostacyclin 합성을 억제할 뿐만 아니라 혈소판에서 $TXA_2$합성을 촉진시켜 그 결과로 혈소판 응집률을 증가시켰음을 알 수 있었다.

  • PDF

Role of Endogenous Nitric Oxide in the Control of Renin Release

  • Lee, Je-Jung;Kim, Dong-Ho;Kim, Young-Jae;Kim, Won-Jae;Yoo, Kwang-Jay;Choi, Ki-Chul;Lee, Jong-Eun
    • The Korean Journal of Physiology
    • /
    • 제28권2호
    • /
    • pp.225-231
    • /
    • 1994
  • The present study was undertaken to investigate the role of endogenous nitric oxide in renin release under different physiological conditions. In the first series of experiments, renin release was either inhibited by acute volume-expansion (VE) or stimulated by clipping one renal artery in the rat. VE was induced by intravenous infusion of saline (0.9% NaCl) up to 5% of the body weight over 45 min under thiopental (50 mg/kg, IP) anesthesia. VE caused a decrease of plasma renin concentration (PRC). With $N^G-nitro-L-arginine$ methyl ester $(L-NAME,\;5\;{\mu}g/kg\;per\;min)$ superadded to VE, PRC decreased further. The magnitude of increase in plasma atrial natriuretic peptide levels following VE was not affected by the L-NAME. In two-kidney, one clip rats, L-NAME-supplementation resulted in a decrease, and L-arginine-supplementation an increase of PRC. Plasma atrial natriuretic peptide levels were significantly lower in the L-arginine group than in the control. Blood pressure did not differ among the L-NAME, L-arginine, and control groups. In another series of experiments, the renin response to a blockade of NO synthesis was examined using in vitro preparations from isolated renal cortex. L-NAME significantly increased basal renin release, although it was without effect on the isoproterenol-stimulated release. These findings suggest that endogenous nitric oxide significantly contributes to the renin release. Since many factors may affect the renin release in vivo, an interaction between NO and renin under various pathophysiological states is to be further defined.

  • PDF

Hot-filament 화학기상 증착법에 의한 탄소나노튜브의 성장 및 표면 특성 (Synthesis and Surface Characterization of Carbon Nanotubes by Hot-Filament Plasma Enhanced Chemical Vapor Deposition)

  • 최은창;김정태;박용섭;최원석;홍병유
    • 한국진공학회지
    • /
    • 제16권3호
    • /
    • pp.187-191
    • /
    • 2007
  • 본 연구에서는 실리콘 웨이퍼 위에 마그네트론 스퍼터링 시스템을 이용하여 Ni 촉매 층을 증착시키고, $NH_3$$C_2H_2$ gas를 이용하여 탄소나노튜브를 성장시켰다. Hot-filament 플라즈마 화학기상 증착법으로 탄소나노튜브의 성장 온도는 350, 450, 550, $650^{\circ}C$로 변화시켰으며, 성장되어진 탄소나노튜브는 field emission scanning electron microscope(FESEM) 분석을 하여 관찰하였고, 접촉각 측정법을 이용하여 탄소나노튜브 층의 특성을 분석하였다. 결과적으로 성장 온도는 탄소나노튜브의 성장 특성을 변화시키는 중요한 요소이다.

고온 플라즈마를 이용한 붕소 함유 나노입자 제조에 관한 연구 (Study on Synthesis of Boron-Containing Nanoparticles Using Thermal Plasma System)

  • 신원규
    • 대한기계학회논문집B
    • /
    • 제36권7호
    • /
    • pp.731-736
    • /
    • 2012
  • 열플라즈마 시스템을 이용하여 붕소 함유 나노입자를 제조하기 위한 새로운 방법이 시도되었다. $BCl_3$$CH_4$ 전구체 기체를 열플라즈마 영역으로 분사하여 고온에서 분해시킨 후, 기체상 응핵 및 성장 과정을 통하여 붕소 또는 붕소 카바이드 입자를 제조하였다. X 선 광분자 분석법을 이용하여 입자 표면의 화학적 결합 상태 및 카바이드와 관련된 B-C 결합 구조 내의 붕소와 탄소의 원자 비율을 측정 및 분석하였다. 또한 나노입자 형상 및 크기 분석을 위해 주사식 투과현미경과 전자에너지손실분광법이 이용되었다. 제조된 나노입자는 30-70 nm 내의 크기 분포를 갖고 있으며, $BCl_3$$CH_4$ 전구체 기체가 각각 20 sccm, 25 sccm 사용되었을 때 B-C 결합 구조 내의 붕소와 탄소의 비는 2.13 이었다.

콜레스테릭 액정의 합성과 광학필름용 편광성분으로서의 응용 (Synthesis of Cholesteric Liquid Crystal and Its Application as a Polarizing Component on the Optical Film)

  • 김용석;이광연;안철흥;김건중
    • 공업화학
    • /
    • 제19권6호
    • /
    • pp.661-667
    • /
    • 2008
  • 본 연구에서는 LCD 백라이트용 휘도향상 편광필름으로 사용하기 위해, 콜레스테릭 액정(CLC)을 합성하여 네미틱 액정과 혼합한 다음 이들이 충진된 모듈을 제작하였다. 광확산필름에 의해 면광원화된 빛을 통과시킬 때, LCD 백라이트상에서 이들의 투과광 증폭 및 편광능력에 대한 특성을 연구하였다. 합성된 콜레스테릭 액정의 특성은 UV/Visible 스펙트럼과 편광현미경(POM) 등으로 평가하였다. 여러 종류의 선형 카르복실산을 콜레스테롤 분자에 도입하여 콜레스테릭 메소젠 사이의 유연격자를 이루도록 유도하여 각 층에서 일정한 방향성을 유지하도록 하였다. 또한 CLC필름을 적층하여 가시광선대에서 편광능력, 휘도향상 및 투과파장영역을 넓히고 백라이트 유니트의 밝기를 향상시키는 모듈로 적용할 수 있었다.