• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.328-329
• /
• 2006

반도체 소자의 소형화, 고질적화는 junction 깊이 감소와 도핑농도의 증가를 요구한다. 현재 상용화되는 도핑법은 이온빔 주입(Ion Beam Ion Implantation, IBII)인데, 이 방법은 낮은 가속에너지를 가하는 경우 이온빔의 정류가 금속이 감소해 주입 속도가 낮아져 대랑 생산이 어렵고 장비가 고가라는 단점이 있다. 하지만 플라즈마를 이용한 이온주입법 (Plasma Source Ion Implantation, PSII)은 공정 속도가 빠르고 제조비용이 매우 저렴해 새로운 이온주입법으로 주목받고 있다. PSII법에서 플라즈마 특성은 그 결과에 큰 영향을 미치므로 플라즈마 특성의 적절한 제어가 필수적으로 요구된다. 본 연구에서는 공정압력과 RF power를 변화시키며 플라즈마 밀도 측정했다. 그 결과 공정압력이 증가함에 따라서 플라즈마 밀도는 감소되었고 RF power 증가함에 따라서 플라즈마 밀도는 증가되었다.

• Nuclear Engineering and Technology
• /
• v.54 no.1
• /
• pp.207-219
• /
• 2022

The suppression of high-intensity blob structures in the scrape-off layer (SOL) by ion-cyclotron range of frequencies (ICRF) power, leading to a decrease in the turbulent fluctuation level, is observed first in the Experimental Advanced Superconducting Tokamak (EAST) experiment. This suppression effect from ICRF power injection is global in the whole SOL at EAST, i.e. blob structures both in the regions that are magnetically connected to the active ICRF launcher and in the regions that are not connected to the active ICRF launcher could be suppressed by ICRF power. However, more ICRF power is required to reach the full blob structure suppression effect in the regions that are magnetically unconnected to the active launcher than in the regions that are magnetically connected to the active launcher. Studies show that a possible reason for the blob suppression could be the enhanced E_r × B shear flow in the SOL, which is supported by the shaper radial gradient in the floating potential profiles sensed by the divertor probe arrays with increasing ICRF power. The local RF wave power unabsorbed by the core plasma is responsible for the modification of potential profiles in the SOL regions.

• Korean Chemical Engineering Research
• /
• v.44 no.5
• /
• pp.520-527
• /
• 2006

A realistic surface model is presented for prediction of various surface phenomena such as polymer deposition, suppression and sputtering as a function of incidence ion energy in high density fluorocarbon plasmas. This model followed ion enhanced etching model using the "well-mixed" or continuous stirred tank reactor (CSTR) assumption to the surface reaction zone. In this work, we suggested ion enhanced polymer formation and decomposition mechanisms that can capture $SiO_2$ etching through a steady-state polymer film on $SiO_2$ under the suppression regime. These mechanisms were derived based on experimental data and molecular dynamic simulation results from literatures. The model coefficients are obtained from fits to available beam and plasma experimental data. In order to show validity of our model, we compared the model results to high density fluorocarbon plasma etching data.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.5
• /
• pp.29-35
• /
• 1999

Inductively coupled plsama etching of platinum thin film was studied using $O_2$ addition to $Cl_2$/Ar gas plasma. In this study, Pt etching mechanism was investigated with Ar/$Cl_2$ /$O_2$ gas plasma by using XPS and QMS. Ion current density was measured with Ar/$Cl_2$ /$O_2$ gas plasma by using single Langmuir probe. It was confirmed by using QMS and single Langmuir probe that Cl and Ar species rapidly decreased and ion current density was also decreased with increasing $O_2$ gas ratios. These results implied that the decrease of Pt etch rate is due to the decrease of reactive species ans ion current density with increasing $O_2$ gas mixing ratios. A maximum etch rate of 150nm/min and the oxide selectivity of 2.5 were obtained at Ar/$Cl_2$ /$O_2$ flow rate of 50 seem, RF power of 600 W, dc bias voltage of 125 V, and the total pressure of 10 mTorr.

• Journal of the Korean Vacuum Society
• /
• v.8 no.3B
• /
• pp.361-367
• /
• 1999

It was observed that the time-dependent sheath which was formed around the planar target biased by negatively voltage pulse with a finite rise time in the plasma source ion implantation. F\Results show that the time-dependent sheath consisted of two parts: the ion matrix sheath development during the pulse rise time and the dynamic sheath motion after attaining the full pulse. The ion matrix sheath development which is in proportion to square root of the pulse time and the pulse rise rate over the plasma density but independent of the ion mass. The dynamic sheath propagates with approximately the ion sound speed.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.1
• /
• pp.37-41
• /
• 2021

We report on the formation of anodic aluminum oxide (AAO) film using sulfuric acid containing cerium salt. When the temperature of the sulfuric acid containing cerium salt changes from 5 ℃ to 20 ℃, the current density and the thickness growth rate increase. The surface morphology of the AAO film change according to the temperature of the electrolytes. And that affected the breakdown voltage and the plasma etch rate. The breakdown voltage per unit thickness was the highest at 15 ℃, and the plasma etch rate was the lowest at 10 ℃ at 2.80 ㎛/h.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.178-178
• /
• 2012

Neutral atom temperature was measured by Laser Rayleigh scattering method using neutral depletion by neutral heating with ideal gas law in Inductively coupled plasma. We observed sudden pressure change when plasma is turned on and off. We analyzed mechanism of neutral heating by employing zero-dimensional neutral and ion energy balance model simultaneously. The results showed that neutral atom temperature increase with ion density. The mechanism of neutral atom heating and cooling is mainly dominated by ion-neutral collision including elastic and charge-exchange collision and by wall cooling respectively.

• Korean Journal of Metals and Materials
• /
• v.46 no.1
• /
• pp.39-43
• /
• 2008

PSII (Plasma Source Ion Implantation) using high density pulsed ICP source was employed to implant oxygen ions in Si wafer. The PSII technique can achieve a nominal oxygen dose of $3 {\times}10^{17}atoms/cm^2$ in implantation time of about 20min. In order to prevent oxidation of SOI layer during high temperature annealing, the wafer was capped with $2,000{\AA}$ $Si_3N_4 $ by PECVD. Cross-sectional TEM showed that continuous $500{\AA}$ thick buried oxide layer was formed with $300{\AA}$ thick top silicon layer in the sample. This study showed the possibility of SOI fabrication using the plasma source ion implantation with pulsed ICP source.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.12
• /
• pp.959-964
• /
• 2001

We investigated the etching characteristics of YMnO$_3$ thin films in high-density plasma etching system. In this study, YMnO$_3$ thin films were etched with CF$_4$/Ar gas chemistries in inductively coupled plasma(ICP). Etch rates of YMnO$_3$ increased up to 20% CF$_4$ in CF$_4$/(CF$_4$+Ar), but decreased with furthermore increasing CF$_4$ in CF$_4$/(CF$_4$+Ar). In optical emission spectroscopy (OES) analysis, F radical and Ar* ions in plasma at various gas chemistries decreased with increasing CF$_4$ content. Chemical states of YMnO$_3$ films exposed in plasma were investigated with x-ray photoelectron spectroscopy (XPS) and secondary ion mass spectrometry (SIMS). There is a chemical reaction between metal (Y, Mn) and F and metal-fluorides were removed effectively by Ar ion sputtering. YF$_{x}$, MnF$_{x}$ such as YF, YF$_2$, YF$_3$ and MnF$_3$ were detected using SIMS analysis. The etch slope is about 65$^{\circ}$ and cleasn surface. surface of the etched YMnO$_3$ thin films was investigated with X-ray photoelectron spectroscopy (XPS) and secondary ion mass spectrometry (SIMS). The etch profile was also investigated by scanning electron microscopy (SEM).EM).

• Journal of the Korean Vacuum Society
• /
• v.7 no.4
• /
• pp.374-380
• /
• 1998

Radical and ion densities in a $CF_4$plasma have been calculated as a function of input power density, gas pressure and feed gas flow rate using simple 0 dimensional global model. Fluorine atom is found to be the most abundant neutral particle. Highly fragmented species such as CF and $CF^+$ become dominant neutral and ionic radical at the high power condition. As the pressure increase, ion density increases but ionization rate decreases due to the decrease in electron temperature. The fractional dissociation of $CF_4$feed gas decreases with pressure after increasing at the low pressure range. Electron density and temperature are almost independent of flow rate within calculation conditions studied. The fractional dissociation of $CF_4$monotonically decreases with flow rate, which results in increase in $CF_3$and decrease in CF density. The calculation results show that the $SiO_2$etch selectivity improvement correlates to the increase in the relative density of fluorocarbon ion and neutral radicals which has high C/F ratio.