• Korea-Australia Rheology Journal
• /
• v.16 no.3
• /
• pp.141-146
• /
• 2004

Shear-induced damage of Red Blood Cell (RBC) is an imminent problem to be solved for the practical application of artificial organs in extra corporeal circulation, as it often happens and affects physiological homeostasis of a patient. To design and operate artificial organs in a safe mode, many investigations have been set up to correlate shear and shear-induced cell damage. Most studies were focused on hemolysis i.e. the extreme case, however, it is important as well to obtain a clear understanding of pre-hemolytic mechanical damage. In this study, the change in deformability of RBC was measured by ektacytometry to investigate the damage of RBC caused by shear. To a small magnitude of pre-shear, there is little difference, but to a large magnitude of pre-shear, cell damage occurs and the effect of shear becomes significant depending on both the magnitude and imposed time of shearing. The threshold stress for cell damage was found to be approximately 30 Pa, which is much less than the threshold of mechanical hemolysis but is large enough to occur in vitro as in the extra corporeal circulation during open-heart surgery or artificial heart. In conclusion, it was found and suggested that the decrease of deformability can be used as an early indication of cell damage, in contrast to measuring plasma hemoglobin. As cell damage always occurs during flow in artificial organs, the results as well as the approach adopted here will be helpful in the design and operation of artificial organs.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.9 no.1
• /
• pp.41-48
• /
• 2011

A mobile laser-induced breakdown detection (LIBD) system was developed for the field measurement of the size and concentration of aquatic colloidal nanoparticles sampled from Korea Atomic Energy Research Institute Underground Research Tunnel (KURT). The established LIBD apparatus is based on the optical detection of a laser-induced plasma by means of a two-dimensional optical imaging method for determining the size of nanoparticle. Calibration curve for determining the size of nanoparticle was obtained from the polystyrene reference particles of a well-defined size. The first direct application was made at KURT for investigating the particle sizes in groundwater. By comparing the size of particles in groundwater with the sizes of reference particles, the mean particle size of approximately $108{\pm}26$ nm with the concentration lower than 50 ppb was determined.

• Journal of Animal Science and Technology
• /
• v.57 no.11
• /
• pp.40.1-40.7
• /
• 2015

Background: Activation of peroxisome proliferator activated receptor gamma ($PPAR{\gamma}$) in the alveolar macrophages (AM) by selective synthetic $PPAR{\gamma}$ ligands, improves the ability of the cells to resolve inflammation. In birds, respiratory macrophages are known as free avian respiratory macrophages (FARM) and show distinct functional differences from AM. The effects of treating FARM with $PPAR{\gamma}$ ligands are unclear. Methods: FARM were harvested by lavage of chicken respiratory tract and their morphology assessed at microscopic level. The effects of $PPAR{\gamma}$ agonists on the FARM in vitro viability, phagocytic capacity and proinflammatory cytokine (TNF-${\alpha}$) production were assessed. Results: FARM had eccentric nucleus and plasma membrane ruffled with filopodial extensions. Ultrastructurally, numerous vesicular bodies presumed to be lysosomes were present. FARM treated with troglitazone, a selective $PPAR{\gamma}$ agonist, had similar in vitro viability with untreated FARM. However, treated FARM co-cultured with polystyrene particles, internalized more particles with a mean volume density of 41 % compared to that of untreated FARM of 21 %. Further, treated FARM significantly decreased LPS-induced TNF-${\alpha}$ production in a dose dependent manner. Conclusion: Results from this study show that $PPAR{\gamma}$ synthetic ligands enhance phagocytic ability of FARM. Further the ligands attenuate production of proinflammatory cytokines in the FARM, suggesting potential therapeutic application of $PPAR{\gamma}$ ligands in the management of respiratory inflammatory disorders in the poultry industry.

• Journal of Pharmaceutical Investigation
• /
• v.23 no.3
• /
• pp.179-186
• /
• 1993

In vitro dissolution test and pharmacokinetic study in human volunteers were conducted to evaluate the pharmacokinetic characteristics of 150 mg furbiprofen sustained-release capsule (FPSR-150). As a reference product, 50 mg flurbiprofen conventional-release capsule (FPCR-50) was used. Dissolution tests of two products were run using the paddle method in 450 : 540 (v/v %) mixture of simulated gastric and intestinal fluids (K.P. VI) by adjusting medium pH according to time. FPCR-50 was dissolved very rapidly, and it took about 1.5 hr for FPCR-50 to be dissolved over 90%, whereas 15 hr for FPSR-150. Also, in pharmacokinetic study, ten healthy male volunteers were administered one capsule of FPSR-150 or two capsules of FPCR-50 (FPCR-l00) with randomized two period cross-over study. Significant differences between FPCR-l00 and FPSR-150 were found in mean times to reach peak concentration, mean resident times and mean terminal phase halflives, while not in AUC/Dose (Student's t-test). In ANOVA for AUC/Dose to compare the bioavailabilities of two FP products, there was no significant difference. From the comparison of the simulated steady-state plasma concentration-time curves following multiple medications of FPCR-50 (3 capsules a day, dosing interval=8 hrs) and FPSR-150 (1 capsule a day) based on the above results obtained from single doses of two FP products, it was noted that the medication of FPSR-150 is more useful in clinical application rather than FPCR-50.

• Journal of Powder Materials
• /
• v.22 no.3
• /
• pp.163-168
• /
• 2015

Ti alloys are extensively used in high-technology application because of their strength, oxidation resistance at high temperature. However, Ti alloys tend to be classified very difficult to cut material. In this paper, The powder synthesis, spark plasma sintering (SPS), bulk material properties such as electrical conductivity and thermal conductivity are systematically examined on $Ti_2AlN$ and $Ti_2AlC$ materials having most light-weight and oxidation resistance among the MAX phases. The bulk samples mainly consisted of $Ti_2AlN$ and $Ti_2AlC$ materials with density close to theoretical value were synthesized by a SPS method. Machining characteristics such as machining time, surface quality are analyzed with measurement of voltage and current waveform according to machining condition of micro-electrical discharge machining with micro-channel shape.

• Journal of Korean Neurosurgical Society
• /
• v.61 no.5
• /
• pp.548-558
• /
• 2018

Objective : Diagnosing acute cerebral infarction is crucial in determining prognosis of stroke patients. Although many serologic tests for prompt diagnosis are available, the clinical application of serologic tests is currently limited. We investigated whether $S100{\beta}$, matrix metalloproteinase-9 (MMP-9), D-dimer, and heat shock protein 70 (HSP70) can be used as biomarkers for acute cerebral infarction. Methods : Focal cerebral ischemia was induced using the modified intraluminal filament technique. Mice were randomly assigned to 30-minute occlusion (n=10), 60-minute occlusion (n=10), or sham (n=5) groups. Four hours later, neurological deficits were evaluated and blood samples were obtained. Infarction volumes were calculated and plasma $S100{\beta}$, MMP-9, D-dimer, and HSP70 levels were measured using enzyme-linked immunosorbent assay. Results : The average infarction volume was $12.32{\pm}2.31mm^3$ and $46.9{\pm}7.43mm^3$ in the 30- and 60-minute groups, respectively. The mean neurological score in the two ischemic groups was $1.6{\pm}0.55$ and $3.2{\pm}0.70$, respectively. $S100{\beta}$, MMP-9, and HSP70 expressions significantly increased after 4 hours of ischemia (p=0.001). Furthermore, $S100{\beta}$ and MMP-9 expressions correlated with infarction volumes (p<0.001) and neurological deficits (p<0.001). There was no significant difference in D-dimer expression between groups (p=0.843). The area under the receiver operating characteristic curve (AUC) showed high sensitivity and specificity for MMP-9, HSP70 (AUC=1), and $S100{\beta}$ (AUC=0.98). Conclusion : $S100{\beta}$, MMP-9, and HSP70 can complement current diagnostic tools to assess cerebral infarction, suggesting their use as potential biomarkers for acute cerebral infarction.

• Korean Journal of Materials Research
• /
• v.11 no.8
• /
• pp.636-640
• /
• 2001

In order to improve the optical Performance of green emitting phosphor for plasma display panel (PDP) application, the wet chemical method for preparing $Zn_{2-x}$ $SiO_4$:xMn (xi=0.02. 0.08) phosphor was designed. The spherical phosphor particles were obtained and the size can be between 0.5$\mu\textrm{m}$ and 2$\mu\textrm{m}$. The formation of phosphor, which had the willemite structure, was completed at relatively low temperature of 108$0^{\circ}C$. Also, photoluminescence Properties of the phosphors prepared were investigated under vacuum ultraviolet excitation. In particular, the emission intensity of Zn$_2$SiO$_4$:0.08Mn phosphor having the 1$\mu\textrm{m}$ of particle size was higher than that of commercial phosphor by 40%. The decay time of zinc silicate powder prepared as containing 8 mole% of manganese has been measured as 7.8ms.

• Korean Journal of Materials Research
• /
• v.18 no.7
• /
• pp.379-383
• /
• 2008

We report on the light-emitting diode (LED) characteristics of core-shell CdSe/ZnS nanocrystal quantum dots (QDs) embedded in $TiO_2$thin films on a Si substrate. A simple p-n junction could be formed when nanocrystal QDs on a p-type Si substrate were embedded in ${\sim}5\;nm$ thick $TiO_2$ thin film, which is inherently an n-type semiconductor. The $TiO_2$ thin film was deposited over QDs at $200^{\circ}C$ using plasma-enhanced metallorganic chemical vapor deposition. The LED structure of $TiO_2$/QDs/Si showed typical p-n diode currentvoltage and electroluminescence characteristics. The colloidal core-shell CdSe/ZnS QDs were synthesized via pyrolysis in the range of $220-280^{\circ}C$. Pyrolysis conditions were optimized through systematic studies as functions of synthesis temperature, reaction time, and surfactant amount.

• Journal of the Korean Vacuum Society
• /
• v.15 no.3
• /
• pp.266-272
• /
• 2006

Application of power higher than the optimum operation value to an external electrode fluorescent lamps(EEFL) leads to the formation of small holes, called pinholes, which subsequently leads to lamp failure. The pinholes come from the insulating breakdown of the capacitor which is the dielectric layer between an external electrode and glass tube. The power of insulation breakdown is proportional to the electric power applied to the lamp. When a lamp current is low in the glass tube of dielectric constant K, the dielectric field strength of pinholes is about 3K kV/mm. The field strength of insulation breakdown decreases as the lamp current increases.

• Korean Journal of Materials Research
• /
• v.11 no.8
• /
• pp.363-363
• /
• 2001

In order to improve the optical Performance of green emitting phosphor for plasma display panel (PDP) application, the wet chemical method for preparing $Zn_{2-x}$ $SiO_4$:xMn (xi=0.02. 0.08) phosphor was designed. The spherical phosphor particles were obtained and the size can be between 0.5$\mu\textrm{m}$ and 2$\mu\textrm{m}$. The formation of phosphor, which had the willemite structure, was completed at relatively low temperature of 108$0^{\circ}C$. Also, photoluminescence Properties of the phosphors prepared were investigated under vacuum ultraviolet excitation. In particular, the emission intensity of Zn$_2$SiO$_4$:0.08Mn phosphor having the 1$\mu\textrm{m}$ of particle size was higher than that of commercial phosphor by 40%. The decay time of zinc silicate powder prepared as containing 8 mole% of manganese has been measured as 7.8ms.