• 한국가스학회지
• /
• 제15권2호
• /
• pp.82-87
• /
• 2011

열매체유는 화학공장의 가열시스템, 열교환 시스템, 가스플랜트 공정, 사출성형 시스템 및 펄프제지 공정 등에 사용된다. 열매체유는 고열이나 산화분해에 아주 안정하고 저항성이 있으며, 누출이나 방출의 경우 점화원을 만나면 쉽게 발화한다. 본 논문은 열메체유의 신유와 사용유에 대해 인화성과 열적 안정성을 고찰하였다. 열매체유의 인화성은 인화점과 자연발화점을 측정하여 평가하였고, 열적안정성은 열안정성시험기와 시차주사열량기를 사용하여 평가하였다. 실험결과로부터 열매체유의 적절한 사용과 취급과 관련된 안전대책 수립을 위해 화재 위험 특성을 제시하였다.

• 한국균학회지
• /
• 제22권3호
• /
• pp.276-280
• /
• 1994

길항작용 뿐만 아니라 식물생장촉진효과가 있는 속간 핵 전이체를 선발하기 위하여 T. harzianum의 원형질체로부터 핵을 분리한 다음 $15\:{\mu}g/ml$의 콜히친을 처리하였다. 최소배지에서 성장하지 않은 영양요구성 균주인 G. virens G88의 원형질체에 콜히친이 처리된 핵을 전이하여 chloroneb이 함유된 재생용 최소배지에서 선발하였다. 전이효율은 0.08%로서 콜히친 및 chloroneb을 처리하지 않은 것보다는 낮지만 segregants는 전혀 나타나지 않았다. 또한 chloroneb 농도에 따라 다양한 형태의 전이체가 선발되었으며 재조합형, 양친형, 그리고 petite형 등으로 동정되었다.

• 한국해양공학회지
• /
• 제32권5호
• /
• pp.310-323
• /
• 2018

In order to protect lives and prevent large-scale injuries in the event of a fire on a ship or an offshore plant, most classification societies are strengthening their fire resistance designs of relevant cargo holds and accommodation compartments to keep flames from being transferred from a fire point to other compartments. Particularly in critical compartments, where flames should not propagate for a certain period of time, such as the A60 class division, both the airtightness and fire-resistant design of a piece passing through a bulkhead are subject to the Safety of Life at Sea Convention (SOLAS) issued by the International Maritime Organization (IMO). In order to verify the suitability of a fire-resistant design for such a penetrating piece, the fire test procedure prescribed by the Maritime Safety Committee (MSC) must be carried out. However, a numerical simulation should first be conducted to minimize the time and cost of the fire resistance test. In this study, transient thermal analyses based on the finite element method were applied to investigate the heat transfer characteristics of a bulkhead penetration piece for the A60 class compartment. In order to determine a rational bulkhead penetration piece design, the transient heat transfer characteristics according to the variation of design parameters such as the diameter, length, and material were reviewed. The verification of the design specification based on a numerical analysis of the transient heat transfer performed in this study will be discussed in the following research paper for the actual fire protection test of the A60 class bulkhead penetration piece.

• 한국자원식물학회지
• /
• 제10권2호
• /
• pp.200-210
• /
• 1997

The understanding on the plant genome is accelerated with the fast advance of molecular biological techniques. The molecular dissecting of the plant genome has made possible the precise genotyping the plants, which can be utilized for molecular breeding program. As well, the molecular cloning of genes interested can facilitate the process of gene transfer between intra-and inter-generic taxa. Moreover, the manipulation of the agronomically important QTL genes, which can be rarely performed by the conventional genetic methods, is also possible by the utilization of molecular markers. In addition to these genetical applications, molecular markers are useful in the areas of plant taxonomy and management of germplasm by fingerprinting analysis. This paper describes the theoretical aspects marker technologies and practical applications of each marker technique.

• 한국식물학회:학술대회논문집
• /
• 한국식물학회 1987년도 식물생명공학 심포지움 논문집 Proceedings of Symposia on Plant Biotechnology
• /
• pp.9-18
• /
• 1987

The plant breeding, a discipline of agricultural sciences, has greatly contributed to huan welfare in relieving food crisis by development of higher yielding, stronger resistant and better quality varieties. However, many conventional plant breeders, especially ones working for major crops, are facing exhaustion of useful genetic variability, which greatly limit the potentional of developing better cultivars. Therefore, the convectional plant breeders have been eagerly looking for new renovational methods in creating genetic varibility. It has been expected that biotechnology would provide the technique to create totally new genetic variability through gene transfer, chromosome manipulation and/or cell fusion. It is strongly suggested that very close interdisciplinary approaches between convectionla plant breeders and biotechnoligists is essentional for opening new era in developing better varieties.

• Journal of Plant Biotechnology
• /
• 제36권2호
• /
• pp.144-148
• /
• 2009

The transfer of Mn-Superoxide Dismutase (SOD2) gene, complex gene (SA) of CuZnSOD and ascorbate peroxidase (APX), and NDP kinase 2 (NDPK2) gene into Korean 4 cultivars (cvs. Millenium White, Glory Blue, Glory Red, and Glory Purple) and 15 purebred lines of petunia was conducted using Agrobaterium-mediated technique. Two (Wongyo A2-16 and A2-36) of 15 purebred lines and one (cv. Glory Red) of 4 cultivars were effective for the transfer of SOD2 gene. The putative transgenic plants survived on the 2nd selection medium were 124. From PCR analysis, 118 (derived from 4 cultivars and 2 purebred lines) of 124 plants were confirmed to contain marker (npt II ) gene, while 58 of 118 plants did not have target genes. There were no plants with both npt II and SA genes. Twenty seven of 28 SOD2 transgenic plants were re-confirmed as transformants by Sothern analysis. SOD2 and NDPK2 genes were expressed in the transgenic petunias as the ratio of 77.8 to 100.0 % and 23.5%, respectively. T1 seeds were obtained from 36 acclimated transgenic plants (SOD2 34 plus NDPK2) in a glasshouse by self-pollination.

• 한국생산제조학회지
• /
• 제26권2호
• /
• pp.243-250
• /
• 2017

A numerical study was conducted to calculate the cooling capacity variation of a power plant ACC (air-cooled condenser) caused by changes in operating conditions. A numerical model was developed using the ${\varepsilon}-NTU$ and finite volume method, containing 100 elements for a single low fin tube. The model was validated through a comparison of cooling capacity between the simulated values and manufacturer's data. Even though simple assumptions and previously presented heat transfer correlations were applied to the model, the prediction error was 1.9%. The simulated variables of the operating conditions were air velocity, air temperature, and mass flux. The analysis on the variation of thermal resistance along the tube showed that the water side thermal resistance was higher than the air side thermal resistance at the downstream end of the tube, indicating that the ACC capacity could be increased by applying technology to enhance in-tube flow condensation heat transfer.

• Journal of Mechanical Science and Technology
• /
• 제19권5호
• /
• pp.1206-1215
• /
• 2005

The thermal stratification phenomena, frequently occurring in the component of nuclear power plant system such as pressurizer surge line, steam generator inlet nozzle, safety injection system (SIS), and chemical and volume control system (CVCS), can cause through-wall cracks, thermal fatigue, unexpected piping displacement and dislocation, and pipe support damage. The phenomenon is one of the unaccounted load in the design stage. However, the load have been found to be serious as nuclear power plant operation experience accumulates. In particular, the thermal stratification by the turbulent penetration or valve leak in the SIS and SCS pipe line can lead these safety systems to failure by the thermal fatigue. Therefore in this study an 1/10 scaledowned experimental rig had been designed and installed. And a series of experimental works had been executed to measure the temperature distribution (thermal stratification) in these systems by the turbulent penetration, valve leak, and heat transfer through valve. The results provide very valuable informations such as turbulent penetration depth, the possibility of thermal stratification by the heat transfer through valve, etc. Also the results are expected to be useful to understand the thermal stratification in these systems, establish the thermal strati­fication criteria and validate the calculation results by CFD Codes such as Fluent, Phenix, CFX.

• 한국압력기기공학회 논문집
• /
• 제7권4호
• /
• pp.38-43
• /
• 2011

For the efficient and safe operation of nuclear power plant, evaluating quantitatively aging phenomenon of major components is necessary. Especially, typical aging parameters such as stresses and cumulative usage factors should be determined accurately to manage the lifetime of the plant facility. The 3-D finite element(FE) model is generated to calculate the aging parameters. Mechanical and thermal transfer functions called Green's functions are developed for the FE model with standard step input. The stress results estimated from transfer functions are verified by comparing with 3-D FE analyses results. Lastly, we suggest an effective fatigue evaluation methodology by using the transfer functions. The usefulness of the proposed fatigue evaluation methodology can be maximized by combining it with an on-line monitoring system.

• 대한기계학회논문집
• /
• 제19권10호
• /
• pp.2586-2594
• /
• 1995

Two phase flow phenomena are observed in many industrial facilities and make much importance of optimum design for nuclear power plant and various heat exchangers. This experimental study has been investigated the classification of the flow pattern, the local void distribution and convective heat transfer in swirl and non-swirl two phase flow under the isothermal and nonisothermal conditions. The convective heat transfer coefficients in the single phase water flow were measured and compared with the calculated results from the Sieder-Tate correlation. These coefficients were used for comparisons with the two-phase heat transfer coefficients in the flow orientations. The experimental results indicate, that the void probe signal and probability density function of void distribution can used into classify the flow patterns, no significant difference in voidage distribution was observed between isothermal and non-isothermal condition in non-swirl flow, the values of two phase heat transfer coefficients increase when superficial air velocities increase, and the enhancement of the values is observed to be most pronounced at the highest superficial water velocity in non-swirl flow. Also two phase heat transfer coefficients in swirl flow are increased when the twist ratios are decreased.