• 한국연소학회:학술대회논문집
• /
• 2005.10a
• /
• pp.238-244
• /
• 2005

This study performs the pilot-plant experiments to evaluate the effect of the oxygen enrichment on the co-incineration of municipal solid waste and organic sludge from a wastewater treatment facility. The design capacity of the stoker-type incinerator pilot-plant is 150 kg/h. Combustion chamber temperatures were measured as well as the stack gas concentrations, i.e., NOx, CO, and the residual oxygen. The maximum ratio of organic sludge waste to the total waste input is 30%. Also the oxygen-enriched air with 23% of oxygen in supplied air is used for stable combustion. As the co-incineration ratio of the sludge increased up to 30% of the total waste input, the primary and the secondary combustion chamber temperature was decreased $to900^{\circ}C$ (primary combustion chamber), $750^{\circ}C$(secondary combustion chamber), respectively, approximately $200^{\circ}C$ below the incineration temperature of the domestic waste only (primary: $1,100^{\circ}C$, secondary: $950^{\circ}C$). However, if the supplied air was enriched to 22% oxygen content in air, the incinerator temperature was high enough to burn the waste mixture with 30% sludge, which has the heating value of 1,600 kcal/kg.

• 연구논문집
• /
• s.23
• /
• pp.93-107
• /
• 1993

The chemistry and performance characteristics of the EBDS process have been introduced, in which experimental results from laboratory, test plant, and pilot plant studies agree very well and can be understood from detailed kinetic models. The parametric dependencies of the NOx and $SO_2$, removal yields on the input conditions have been discussed and formulated quantitatively. The process is best suited for flue gas with high $SO_2$, loadings. The operation conditions, such as dose, ammonia, and water additions, can be adjusted fast upon load changes. The process works waste water free and the major product is a mixture of ammonium nitrate and sulfate that can be used as fertilizer. The up-date results show that the EBDS technology is safe and competitive with other already well-established technologies. Due to these interesting features, the electron beam process has gained much international recognition. Demonstration units of 100MW have been proposed in the United States and Japan. Further pilot plants are under construction in Poland and China, countries that make abundant use of highsulfur coal. Additional research activities are under way to further improve the energy efficiency of process, and accelerator prices have been decreasing during the past 10 years. So the EBDS process has a good chance to start a new generation of emission-control technology.

• Korean Journal of Medicinal Crop Science
• /
• v.12 no.5
• /
• pp.384-390
• /
• 2004

An in vtro nucellar polyembryo propagation method was established with mature seed of the Citrus junos Sieb. 7-8 nucellar polyembryos per seed were induced on MS basal medium without plant growth regulators. The polyembryos developed to complete plantlets on teatment with IBA. These shoots grew further in MS medium without plant growth regulators. Rooting of shoots occurred on MS medium supplemented with IBA. These plantlets were successfully transplanted to small plastic pot containing soil mixture. Somatic embryos were induced from nucellar polyembryo and maturation occurred spontaneously from proliferating cultures on MS medium without growth regulators. Random Amplified Polymorphic DNA (RAPD) marker analysis of in vitro and in vivo grown junos orange showed identical polymorphism indicative of their genetic stability. The RAPD polymorphism produced revealed same banding pattern in each regenerant. Hence, propagaton of junos orange by nucellalr polyembryos was efficient and produced in genetically stable plants under in vitro conditions.

• KSBB Journal
• /
• v.30 no.3
• /
• pp.97-102
• /
• 2015

This study aimed to evaluate the potential plantgrowth promoting effects of potassium polyacrylate, a superabsorbent polymer, and Bacillus sp. SH1RP8, a family of plant-growth-promoting bacteria. Potassium polyacrylate was selected as the polymer for use due to its high molecular weight and its ability to retain and continuously supply moisture. Plant-growth-promoting rhizobacteria (PGPR) were isolated from the soil and applied to plants growing in dry environments, such as saline conditions. The moisture absorption and retention abilities of potassium polyacrylate were evaluated at a high temperature ($50^{\circ}C$) and in a dry condition, during which time the polymer showed a water retention potential of 19606.07% after 29 days. To overcome the reaming problem in the soil environment, natural polymers (such as cellulose) were mixed with the potassium acrylate. The shoot growths of Peucedanum japonicum Thunb and Arundo donax were significantly enhanced when treated with the mixture of the isolated rhizosphere bacterium SH1RP8 and potassium polyacrylate (63.5 and 124.3%, respectively).

• Journal of Plant Biotechnology
• /
• v.6 no.2
• /
• pp.69-75
• /
• 2004

Optimal protocol for efficient genetic transformation has been defined to aid future strategies of genetic engineering in pigeon pea with agronomically important genes. Transgenic pigeonpea plants were successfully produced through Agrobacterium tumefaciens-mediated genetic transformation method using cotyledonary node explants by employing defined culture media. The explants were co-cultivated with A. tumefaciens strain C-58 harboring the binary plasmid, pCAMBIA-1301 [con-ferring $\beta$-glucuronidase(GUS) activity and resistance to hygromycin] and cultured on selection medium (regeneration medium supplemented with hygromycin) to select putatively transformed shoots. The shoots were then rooted on root induction medium and transferred to pots containing sand and soil mixture in the ratio of 1:1. About 22 putative TO transgenic plants have been produced. Stable expression and integration of the transgenes in the putative transgenics were confirmed by GUS assay, PCR and Southern blot hybridization with a transformation efficiency of over 45%. Stable integration and expression of the marker gene has been confirmed in the TO and T1 transgenics through PCR, and Southern hybridization.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2002.11b
• /
• pp.52-52
• /
• 2002

Chitosan is a key compound of shrimp waste. It is a biopolymer, which is widely used in the field of medical Sciences. Chitosan-TPP (Tripolyphosphate) complex has more or less similar physical properties as Ca-alginate which can be used for the production of synthetic seeds. Possibility of the use of Chitosan-TPP complex as a matrix for encapsulation of somatic embryos was tested against the Ca-alginate complex (2.5w/v Na-alginate, 100mM CaCl2 at pH 5.5). Somatic embryos grown in the induction medium (IM) were drawn into the viscous chitosan solution (1%) and mixed well by inverting the tube carefully. Then the mixture was dropped at regular intervals into the tripolyphosphate (TPP) solution kept on a magnetic stirrer for bead formation. Synthetic seeds formed were washed and transferred into the incubation medium, then allowed either to air-dry or freeze-dry.(중략)

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.10a
• /
• pp.358-363
• /
• 1995

A study on passive cooling systems for concrete containment of advanced pressurized water reactors has been performed. The proposed passive containment cooling system (PCCS) consist of (1) condenser units located inside containment, (2) a steam condensing pool outside containment at higher elevation, and (3) downcommer/riser piping systems which provide coolant flow paths. During an accident causing high containment pressure and temperature, the steam/air mixture in containment is condensed on the outer surface of condenser tubes transferring the heat to coolant flowing inside tubes. The coolant transfers the heat to the steam condensing pool via natural circulation due to density difference. This PCCS has the following characteristic: (1) applicable to concrete containment system, (2) no limitation in plant capacity expansion, (3) efficient steam condensing mechanism (dropwise or film condensation at the surface of condenser tube), and (4) utilization of a fully passive mechanism. A preliminary conceptual design work has been done based on steady-state assumptions to determine important design parameter including the elevation of components and required heat transfer area of the condenser tube. Assuming a decay power level of 2%, the required heat transfer area for 1,000MWe plant is assessed to be about 2,000 ㎡ (equivalent to 1,600 of 10 m-long, 4-cm-OD tubes) with the relative elevation difference of 38 m between the condenser and steam condensing pool and the riser diameter of 0.62 m.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.spc1
• /
• pp.239-241
• /
• 2005

Alisma plantago seeds have some difficulties for mechanical sowing because of small, irregular and shrunken shapes. Thus it was intended to make seed pelleting for Alisma piantago seeds to solve these problem. The main object of this study was to find the best materials for Alisma plantago seeds pelleting. The most desirable shapes which provide a spherical and smooth surface of the pelleted seeds that enhance mechanical singling was made from the mixture of SDZ + DE + CA $0.4\%$. The pelleted seeds were easily broken after absorbing water and the germination rate of those was $95.3\%$ in lab.

• Journal of Plant Biotechnology
• /
• v.30 no.3
• /
• pp.269-273
• /
• 2003

In order to develop an efficient micropropagation protocal for Eucalyptus pellita, on in vitro culture system has been was established by inducing axillary buds from greenhouse stock materials. Among 6different media tested, DKW medium was the best ot induce bast induce both shoot proliferation and growth. Average number of proliferated shoots of 403per explant was obtained at the concentration of 0.1mg/LBA. Most of the stem materials excreted phenolic compounds at the proximal part of the explant and caused darking of the media. Therefore, it was necessary to transfer frequently to a fresh medium and/or to add activated charcoal at the concentration of 0.02％(w/v). Generally on vitro roots were formed easily on 1/2DKW medium with NAA treatment. All the explants rooted at the medium containing 0.2mg/L NAA and displayed vigorous root growth in vitro culture conditions. After transferred to an artificial soil mixture (peatmoss: vermiculrite: perlite, 1:1:1, v/v/v) in the greenhouse, most rooted plantlets survived well without any morphological abnormalities. The results show that the species can be micropropagated effectively by the application of axillary bud culture system.

• Journal of the Korean Institute of Gas
• /
• v.15 no.1
• /
• pp.40-45
• /
• 2011

During process operations, overpressure can be caused by operator's error or malfunction of the device. To prevent this overpressure, gas was released through blowdown system. Because most of released gases are the hydrocarbon mixture and have flammable and toxic properties, the gas is released after burning in flare stack. The increase of scale and complexity of plant requires higher or additional flare stacks. This study tried to solve this problem through flare gas recovery system.