• Journal of Energy Engineering
• /
• v.26 no.4
• /
• pp.100-106
• /
• 2017

The materials of SUS304 and SS400 are adopted for prediction of workpiece temperature variation according to ambient temperature in a reheating furnace. Five thermocouples were installed in a depth direction inside the material, and the ambient temperature was raised to 1200 Celsius degrees. As a result, the material average temperature reached more than 1150 Celsius degrees, and the surface and inside of workpiece locally showed a temperature difference of more than 10K. In order to verify the experimental results, numerical analysis was conducted by applying a thermal model, and the error of numerical simulation compared with the experimental results was within the range of 15K at the average outlet temperature. Also, the error was relatively higher in the SS400 material, which has a larger specific heat change than the SUS304 material. In conclusion, the workpiece temperature in the reheating furnace can be achieved through the atmospheric temperature control, and it is experimentally proved that the material temperature change according to the atmospheric temperature can be estimated within about 3% error range at the outlet position using a thermal model.

• Corrosion Science and Technology
• /
• v.6 no.5
• /
• pp.233-238
• /
• 2007

Due to the occasional occurrence of a localizedcorrosion such as a SCC and pitting in steam generator tubing(Alloy 600), leading to a significant economical loss, an effective repair technology is needed. For a successful electrodeposition inside a tube, many processes should be developed. Among these processes, an anode to be installed inside a tube, a degreasing condition to remove any dirt and grease, an activation condition for a surface oxide elimination, a strike layer forming condition which needs to be adhered tightly between an electroforming layer and a parent tube and a condition for an electroforming layer should be established. Through a combination of these various process condition parameters, the desired material properties can be acquired. Among these process parameters, various material properties including a mechanical property and its variation along with the height of the electrodeposit inside a tube as well as its thermal stability and SCC resistance should be assessed for an application in a plant. This work deals with the material properties of the Ni electrodeposits formed inside a tube by using the anode developed in this study such as the current efficiency, hardness, tensile property, thermal stability and SCC behavior of the electrodeposit in a 40wt% NaOH solution at $315^{\circ}C$. It was found that a variation of the material properties within the entire length of the electrodeposit was quite acceptable and the Ni electrodeposit showed an excellent SCC resistance.

• Nuclear Engineering and Technology
• /
• v.28 no.3
• /
• pp.339-348
• /
• 1996

Plant monitoring algorithm developments seem to be saturated which means that display system to show the results from the algorithm should be the well-defined and interactive tools for operator's diagnosing, controlling, restoring the abnormal plant situations. On the other hand, very little generalized display design concepts and evaluations are available. Events that are unfamiliar to operators and that has not been anticipated by designers may cause great threats to the nuclear power plant system safety operation. The abstraction hierarchy, considered most popular display design methodology but not generalized for nuclear power plant design space, has ken proposed as a representation frame work that can be adopted to design interfaces and supports operators in diagnosing overlooked events that should have been considered to operate plant safely. However most practical plant display systems do not fully stick to this design concept but partially rely on their philosophy from design experiences. Abstraction hierarchy display design concept will be do scribed and the trend of Advanced Control Room(ACR) CRT design will also be presented with the conventional display for the several type of plants. Consequently this complementary material should be of interest to designer and regulators concerned with nuclear power plant.

• Nuclear Engineering and Technology
• /
• v.44 no.3
• /
• pp.343-354
• /
• 2012

Primary water stress corrosion cracking (PWSCC) is a major safety concern in the nuclear power industry worldwide. PWSCC is known to initiate only in the condition in which sufficiently high tensile stress is applied to alloy 600 tube material or alloy 82/182 weld material in pressurized water reactor operating environments. However, it is still uncertain how much tensile stress is re-quired to generate PWSCC or what causes such high tensile stress. This study was performed to pre-dict the magnitude of weld residual stress and operating stress and compare it with previous experi-mental results for PWSCC initiation. For the study, a pressurizer safety nozzle was selected because it is reported to be vulnerable to PWSCC in overseas plants. The assessment was conducted by nu-merical analysis. Before performing stress analysis for plant conditions, a preliminary mock-up ana-lysis was done. The result of the preliminary analysis was validated by residual stress measurement in the mock-up. After verification of the analysis methodology, an analysis under plant conditions was conducted. The analysis results show that the stress level is not high enough to initiate PWSCC. If a plant is properly welded and operated, PWSCC is not likely to occur in the pressurizer safety nozzle.

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.6
• /
• pp.653-660
• /
• 2015

Technologies for reducing construction duration are key factors in nuclear power plant construction projects, as a reduction in construction duration at the construction phase leads to a reduction in construction cost and an increase in profits through the early operation of the nuclear power plant. To analyze the constructability of the height of single-layer placement of formwork for the Reactor Containment Building (RCB) exterior wall through lateral pressure according to the height of concrete placement, the deformation criteria for formwork, and a new form design, 'MIDAS GEN (hereinafter referred to as MIDAS)' is used in this study. The cost and workload of formwork are derived according to the unit of height of the RCB exterior wall. Based on the result, it was found that the higher the RCB exterior wall, the higher the material cost, and the less the construction duration and the less the total number of formwork layers. Based on this result, it is believed that the material cost and the construction duration can be appropriately determined according to the formwork height.

• Journal of Plant Biotechnology
• /
• v.39 no.1
• /
• pp.62-68
• /
• 2012

The vegetable brassicas are an important crop worldwide and are of significant commercial value. In order to ensure our targets for food security are met it is important that these crops are continually improved to increase sustainability of production, increase nutritional quality and reduce waste. Development of resistances against both biotic and abiotic stress are recognised as being key. Plant breeding plays a vital role in addressing these issues through the development of new and improved varieties. This continued improvement is becoming evermore dependent on our ability to identify and introgress beneficial alleles from 'exotic' germplasm into elite breeding material. Increasingly, more diverse germplasm such as those found in genebanks is being screened for benificial allelic variation, however, plant breeders often find it difficult to make use of such material due to the time required to remove undesirable characteristics from progeny due to linkage drag. This article describes how we have attempted to overcome this and develop resources that make the diversity available within the $Brassica$ $oleracea$ genepool more accessible.

• Nuclear Engineering and Technology
• /
• v.48 no.3
• /
• pp.820-830
• /
• 2016

Pipe wall thinning by flow-accelerated corrosion and various types of erosion is a significant and costly damage phenomenon in secondary piping systems of nuclear power plants (NPPs). Most NPPs have management programs to ensure pipe integrity due to wall thinning that includes periodic measurements for pipe wall thicknesses using nondestructive evaluation techniques. Numerous measurements using ultrasonic tests (UTs; one of the nondestructive evaluation technologies) have been performed during scheduled outages in NPPs. Using the thickness measurement data, wall thinning rates of each component are determined conservatively according to several evaluation methods developed by the United States Electric Power Research Institute. However, little is known about the conservativeness or reliability of the evaluation methods because of a lack of understanding of the measurement error. In this study, quantitative models for UT thickness measurement deviations of nuclear pipes and fittings were developed as the first step for establishing an optimized thinning evaluation procedure considering measurement error. In order to understand the characteristics of UT thickness measurement errors of nuclear pipes and fittings, round robin test results, which were obtained by previous researchers under laboratory conditions, were analyzed. Then, based on a large dataset of actual plant data from four NPPs, a quantitative model for UT thickness measurement deviation is proposed for plant conditions.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.2 s.32
• /
• pp.90-98
• /
• 1999

Boiler high-temperature pipelines such as main steam pipe, header and steam drum in fossil power plants are degraded by creep damage due to severe operationg conditions like high temperature and high pressure for an extended period time. Such material degradation lead to various component faliures causing serious accidents at the plant. Conventional measurement techniques such as replica method, electric resistance method, and hardness test method have such disadvantages as complex preparation and measurement procedures, too many control parameters, and therefore, low practicality and they were applied only to component surfaces with good accessibility. In this study, both artificial creep degradation test using life prediction formula and frequency analysis by ultrasonic tests for their preparing creep degraded specimens have been carried out for the purpose of nondestructive evaluation for creep damage which can occur in high-temperature pipelline of fossil power plant. As a result of ultrasonic tests for crept specimens, we confirmed that the high frequency side spectra decrease and central frequency components shift to low frequency bans, and bandwiths decrease as increasing creep damage in backwall echoes.

• Korean Journal of Plant Resources
• /
• v.27 no.6
• /
• pp.601-609
• /
• 2014

In this study, the effect of plant extract on the senescence action and cell survival rate in two types of cells, in which aging was derived by adriamycin, was analyzed to find the materials for suppressing cell senescence from natural resources. The results are as follows. For human umbilical vein endothelial cells (HUVECs), the fruit of Physalis angulata L. and the aerial part of Synurus deltoides (Aiton) Nakai showed excellent cell-senescence inhibition activities in a treatment concentration-dependent manner, demonstrating the high possibility for utilization as a material for prevention and treatment for vascular diseases. The water extract from the root of Polygonatum odoratum var. pluriflorum for variegatum Y. N. Lee showed potent cell-senescence inhibitory effect for human dermal fibroblasts (HDFs). Thus it is considered that the additional study on the plant needs for elucidating the possible utilization as material for skin health improvement.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.05b
• /
• pp.93-96
• /
• 2009

This study is to examine a change of quality and a material performance of fiber reinforced cement composite for mass production. It is necessary to make Strain-hardening cementitious composite(SHCC) by batcher plant for ready-mixed concrete and use the performance of SHCC which made based on laboratory level. This study makes a comparative performance of press and mechanics that is the property of Strain-hardening by direct tension. In case of making by batcher plant. This experiment has demonstrated that even if it takes long after being mixed small and compared with the one which made based on laboratory, it has a tendency to be dissatisfied with fiver's dispersion and lower its performance of Strain-hardening. The reason why the material performance of SHCC for mass production went down is through SHCC that mixed sometimes matrix's viscosity and fiber's dispersion.