• Plant Resources
• /
• v.3 no.3
• /
• pp.219-222
• /
• 2000

For the purpose of establishing an efficient propagation through airlift bioreactor system of Zingiber of officinale Rosc. Korean native Seosanjong, the effect of different factors and bioreactor on cultured plantlets were investigated. The highest number of plantlets, fresh weight per plant was obtained from explants when cultured in MS liquid medium including 0.3 mg/L NAA and 2.0 mg/L kinetin for 40 days. A 10 L bottle type bubble bioreactor, compared with 250 mL Erlenmeyer flask, was more efficient, producing 4.7 plantlets or from 1.5 to 1.6 times more than did the Erlenmeyer flask. The results demonstrate the rapid mass propagation of airlift bioreactor to produce normal ginger.

• KSBB Journal
• /
• v.14 no.5
• /
• pp.534-538
• /
• 1999

For the optimization of operating conditions for plant cell suspension culture in bioreactors, effects of bioreactor types, various kinds of impellers, and aeration rates were examined using Nicotiana tabacum cells as a model system. Stirred tank bioreactor and airlift bioreactor were used for the comparison of bioreactor type. Growth rates in both bioreactors were lower than in shake flasks. In terms of final cell concentration, stirred tank bioreactor supported a little bit better growth compared to airlift bioreactor. Impeller type did not affect cell growth significantly, but it was apparent that cell size index decreased in the case of using hollowed paddle impeller. When the aeration rate was maintained at 0.3 vvm, cell growth was the best. At above 1.0 vvm, growth inhibition as well a browning was noticed. In addition, it was found that cell size index reduced proportionally to the increased of aeration rate.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.1
• /
• pp.72-74
• /
• 2001

Transgenic Nicotiana tabacum cells were cultivated for the production of murine granulocyte macrophage-colony stimulating factor (mGM-CSF) in both a stirred tank bioreactor and an airlift bioreactor with draft tube. Cell growth and mGM-CSF production in the airlift bioreactor were found to be better than those achieved in the stirred tank bioreactor. In the airlift bioreactor, 9.0g/L of cells and 2.2ng/mL of mGM-CSF were obtained (11.0g/L and 2.4ng/mL, respectively in shake flasks). Although the lag period was prolonged and mGM-CSF production was lowered by 33% in the stirred thank bioreactor as compared to the control culture, the maximum cell density was increased up to 12.0g/L due to better mixing by agitation at the higher cell density.

• Journal of Plant Biotechnology
• /
• v.31 no.4
• /
• pp.307-312
• /
• 2004

The bioreactor system for the large-scale plant tissue culture was developed to control the pH concentration and DO (dissolved oxygen), and air flowrate. The system controlling the proper air flow rate for each bulblet growth stage and monitoring the contamination of bioreactor using the pH change was controled by computer program. For the uniform bulblet distribution in bioreactor, the proper air flow rate was 300 cc/min at the beginning of bulblet culture, 400 cc/min after 20 days, 500 cc/min after 40 days, 600 cc/min after 60days, and 700 cc/min after 80 days. It was possible to maintain the pH concentration within 5.5$\pm$0.5 during the culture by control system of bioreactor.

• Horticultural Science & Technology
• /
• v.28 no.5
• /
• pp.845-849
• /
• 2010

This study was conducted to compare various culture methods and evaluate economic feasibility of each method for mass propagation of new ever-bearing strawberry 'Goha'. Four different methods such as semi-solid culture, solid culture, liquid suspension culture and bioreactor culture were compared. The solid culture and bioreactor culture showed the shortest and longest root length, such as 3.6 cm and 8.3 cm, respectively. Fresh weights of plants cultured in bioreactor were 2,261 mg, which were heavier than those of cultures. Dry weights of plants cultured in bioreactor were the heavier compared to those in other cultures. The number of axillary bud developed in bioreactor was seven, but axillary bud was not developed in other cultures. Production cost through bioreactor culture was calculated to be 303 won per plant which was 542 won less than that of solid culture. As a result, we found that the bioreactor culture was the most cost effective culture method for in vitro mass propagation in new ever-bearing strawberry 'Goha'.

• Plant Biotechnology Reports
• /
• v.2 no.2
• /
• pp.133-136
• /
• 2008

Cell cultures of Commiphora wightii (Arnott.) Bhandari were grown in shake flasks and a bioreactor and an increase in guggulsterone accumulation up to $18{\mu}g\;l^{-1}$ was recorded in cells grown in the production medium containing a combination of sucrose:glucose (4% total), precursors (phenylalanine, pyruvic acid, xylose, and sodium acetate), morphactin, and 2iP. A yield of $10g\;l^{-1}$ biomass and ${\sim}200{\mu}g\;l^{-1}$ guggulsterone was recorded in a 3-l flask and in a 2-l stirred tank bioreactor compared with 6.6 g biomass and $67{\mu}g\;l^{-1}$ guggulsterone in 250-ml flasks. Increased vessel size was correlated with increased biomass and guggulsterone accumulation. 2iP alone was not effective for biomass and guggulsterone accumulation in cell cultures of C. wightii.

• Journal of Plant Biotechnology
• /
• v.31 no.3
• /
• pp.249-253
• /
• 2004

The type of air lift bioreactor affected the root growth in ginseng adventitious root cultures. Among bioreactors used in this experiment, bulb type bubble bioreactor (BU) was the best to increase root growth (41.92 g dry weight). The kLa value representing the oxygen transfer capacity from medium to explants (6.98 h$^{-1}$ ) in BU with 5 cm bubble column was higher than other bioreactors. On the other hand, cylindric tube bioreactor (CT) without bubble column resulted in minimum root growth (38.55 g dry weight) and kLa value (5.25 h$^{-1}$ ). Furthermore, the root growth (50.30 g dry weight) in BU with 10 cm bubble column more increased than 5 cm bubble column. However, the kLa value do not affected the secondary metabolite such as ginsenosides. These results show that the bubble column in air lift bioreactor increase kLa value and increased kLa value stimulate the growth of ginseng adventitious roots.

• Korean Journal of Plant Resources
• /
• v.30 no.6
• /
• pp.699-706
• /
• 2017

For rapid production of freesia 'Shiny Gold' shoots by using a bioreactor, several culture conditions were investigated. Young shoots (< 1 cm) obtained from freesia corm section in vitro were used as plant materials for this experiment. As a basic experimental environment, 20 young shoots were inoculated into a 5 L balloon type bubble reactor which contained 1 L 1/2 strength MS medium supplemented with 30 g sucrose (3%), and the aeration was 0.1 vvm (vessel volumes per minute). The bioreactors were placed in a growth room with $23^{\circ}C$ temperature, 60% relative humidity and $60{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ light condition (16 h/8 h, day/night). The concentrations of MS media were set with 1/4, 1/2, 1 strength, medium volume 10, 20, 40%, sucrose concentration 3, 6, 9%, and aeration 0.1, 0.2, 0.4 vvm. After 4 weeks of cultivation, the growth indexes including the fresh and dry weight, and plant height were evaluated. At the same time, the consumption, pH, and EC of medium were estimated 4 weeks after incubating. The best results were achieved when 40 young shoots were incubated in a bioreactor in which 1 L of 1/2 strength MS medium supplemented with 6% sucrose was used for the rapid production of freesia shoots. The shoots were 17 cm in plant height and 1.0 g in fresh weight only 4 weeks after incubation which could be a good plant material suitable for corm enlargement in vitro. No correlation was observed between the growth of freesia shoots and the consumption, pH or EC of medium.

• KSBB Journal
• /
• v.5 no.3
• /
• pp.207-214
• /
• 1990

Growth properties of carrot hairy roots transformed by Agrobacterium rhizogenes were compared in flask and bioreactor. Oxygen transfer coefficient KLa was measured during the cultivation in bioreactor. In flask cultures, initially sucrose 30g/l was nearly exhausted after 20days. pH was dropped from initially 5.8 to 4.79 after 4 days, but it is stable after that time. Finally, after 28 days, hairy roots were grown about twelve times. In view of the results studied optimum conditions, hairy roots were maintained high growth rates in sucrose 50g/l, pH 5.8, total nitrogen 60mM. Also in bioreactor cultures, fixed stainless sieve in bottom and aerated 0.31 vvm, the results of cultivation by the use of sucrose 50g/l had grown about twenty-eight times and pH variations were liked in flask. As a results, growth rate of 1.756g fresh weight/day/g inoculum in bioreactor were higher about three times than 0.57g fresh weight/day/g inoculum in flask culture. KLa values were showed a tendency to decrease from 0.209 min-1 to 0.068 min-1.

• Journal of Plant Biotechnology
• /
• v.31 no.3
• /
• pp.219-223
• /
• 2004

Embryogenic calli were induced from petioles of Aralia elata on MS solid medium supplemented with 1.0 mg/L 2,4-D. When embryogenic calli were transferred to MS liquid medium supplemented with 1.0 mg/L 2,4-D, embryogenic cells and embryogenic cell clusters were developed after 2 weeks of culture. Embryogenic cells were filtered through a 250 ${\mu}{\textrm}{m}$ sieve and the passed cells were proliferated and maintained in MS liquid medium supplemented with 1.0 mg/L 2,4-D. Embryogenic cell clusters entrapped on the sieve were transferred to 1/2 MS liquid medium without plant growth regulators, globular-shaped embryos were developed from embryogenic cell clusters after 2 weeks of culture. Numerous early stage somatic embryos could be developed to heart-shaped, torpedo-shaped, cotyledonary embryos and plantlets in 5 L bioreactor. Above results suggest that effective somatic embryo proliferation can be achieved via bioreactor culture systems in Aralia elata.