• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.4
• /
• pp.397-403
• /
• 2015

In this paper, a method of ISAR geometric calibration is represented by using impulse-radio UWB radar. The ir-UWB is good for using a signal processing in time domain, so, it does not occur a multi-path or coupling problem. If a signal that between antennas and target is assumed a plane wave, a center of rotation in ISAR geometry model can be estimated by using point target. Before image is reconstructed with sinogram, the center of rotation can be calculated by using least square fitting. This method can be obtained a more contrast image, and a maximum value of entropy of image. The method, that estimates a center of rotation in received data, will be used a initial setup of instruments or a periodic compensation to reconstruct image. It would be useful in medical, security and surveillance imaging equipments that have a fixed geometry.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.5
• /
• pp.269-278
• /
• 2013

In this study, in order to examine the applicability of computational fluid dynamics with the porous model to the analysis of APR+ (Advanced Power Reactor Plus) internal flow, simulation was conducted with the commercial multi-purpose computational fluid dynamics software, ANSYS CFX V.14. In addition, among the various reactor internals, the effect of flow skirt geometry on reactor internal flow was investigated. It was concluded that the porous model for some reactor internal structures could adequately predict the hydraulic characteristics inside the reactor in a qualitative manner. If sufficient computation resource is available, the predicted core inlet flow distribution is expected to be more accurate, by considering the real geometry of the internal structures, especially located in the upstream of the core inlet. Finally, depending on the shape of the flow skirt, the flow distribution was somewhat different locally. The standard deviation of the mass flow rate (${\sigma}$) for the original shape of flow skirt was smaller, than that for the modified shape of flow skirt. This means that the original shape of the flow skirt may give a more uniform distribution of mass flow rate at the core inlet plane, which may be more desirable for the core cooling.

• Journal of Korea Water Resources Association
• /
• v.41 no.7
• /
• pp.701-709
• /
• 2008

Surface Image Velocimetry (SIV) is an instrument to measure water surface velocity by using image processing techniques. It gives us one of the easiest ways to measure water velocity. However, since it requires a set of plane survey data to estimate the velocity, it may give us some kind of misconcept that its usage would be difficult or cumbersome in spite of its handiness. If it has a feature that can estimate the plane survey data easily, it may be treated as like one of the conventional propeller velocimetries and its applicability would be improved so high. The present study is to propose a method to estimate the plane geometry of the physical coordinate with a calibrated camera. With the feature we can half-automatize the estimating procedure for the whole water velocity field. Photogrammetric technique to calculate the plane coordinates of the reference points with a calibrated camera was studied, which has originally studied for long time in the field of computer vision. By applying this technique to SIV, it is possible to estimate the location of reference coordinates for projective transform without plane survey. With this procedure the cumbersome plane survey for the reference points is omitted. One example application of the developed method showed fairly good results with insignificant errors.

• Journal of Educational Research in Mathematics
• /
• v.16 no.1
• /
• pp.25-41
• /
• 2006

The purpose of this study was to analyze teachers' pedagogical content knowledge (PCK) about area of plane figure and how it was actualized in instruction. As an exploratory, qualitative, and comparative case study, 2 fifth-grade teachers were selected. Semi-structured interviews with the leachers were conducted in order to explore their PCK with regard to the area of plane figure. A total of 14 mathematics instructions were videotaped and transcribed. Teachers' PCK and classroom teaching practices were analyzed in detail into 3 categories: (a) knowledge of mathematics contents, (b) knowledge of students' understanding, and (c) knowledge of instructional methods. As such, this paper provided a detailed description on each teacher's PCK and her teaching practice. The results showed that teachers' PCK had a significant impact on instruction. The teacher who had rich knowledge about the area of plane figure was able to encourage students to understand the concept of area and to or explore the principles behind formula calculating various areas of plane geometry. The results demonstrated the importance of individual components of PCK as well as that of overall level of PCK. Different aspects of teaching practices were observed as to how the teachers had internalized PCK. On the basis of a close relationship between teachers' PCK and their teaching practice, this paper finally raised several implications for teachers' professional development for effective mathematics instruction.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.4706-4712
• /
• 2013

One of the efficient procedures for the solution of partial differential equations is the method of differential quadrature. This method has been applied to a large number of cases to circumvent the difficulties of programming complex algorithms for the computer, as well as excessive use of storage due to conditions of complex geometry and loading. Under in-plane uniform distributed load, the buckling of asymmetric curved beam with varying cross section is analyzed by using differential quadrature method (DQM). Critical load due to diverse cross section variation and opening angle is calculated. Analysis result of DQM is compared with the result of exact analytic solution. As DQM is used with small grid points, exact analysis result is shown. New result according to diverse cross section variation is also suggested.

• Journal of the Korean Chemical Society
• /
• v.34 no.2
• /
• pp.130-135
• /
• 1990

The title compound (C13H17NO2S) is monoclinic, space group P21/a, with a = 13.756 (3), b = 9.310(4), c = 21.305(3) $\AA$, $\beta$ = 95.0。, Z = 8, V = 2718.11 $\AA$3, Dc = 1.23$g·{\cdot}cm-3$, (Mo k$\alpha$) = 0.71069$\AA$,$\mu$ = 2.18 cm-1, F(000) = 1071.86, T = 298, R = 0.085 for 2935 unique observed reflections with I >2.0$\sigma$(I). The structure was solved by direct methods. The C-H bond lengths and the methyl groups are fixed and refined as their ideal geometry by allowing to ride on the parent atoms. Both molecules A and B have almost same structures except for two terminal ethyl groups. The ethylene-like skeleton including the nitro group in one molecule is nearly perpendicular to the plane of the methylbenzene group and two ethyl groups form a cis-type structure which has the dfferent orientations between two molecules; in the molecule A, two terminal methyl groups being the opposite directional arrangement against the plane of its skeleton, while in the B, with the same directional structure from its plane. The molecules in the crystal are packed together by non-bonded van der Waals forces.

• Bulletin of the Korean Mathematical Society
• /
• v.44 no.3
• /
• pp.483-492
• /
• 2007

In this paper, we study the map projections from pseudo-sphere $S_1^2$ onto the non-lightlike surfaces in the 3-dimensional Lorentzian space, $L^3$, with curvature zero. We show geometrical means and properties of $\mathbb{R}{\times}S_1^1-cylindrical$, $S^1{\times}L-cylindrical$ and $\mathbb{R}{\times}H_0^1-cylindrical$ projections defined on $S_1^2$ to cylinders $\mathbb{R}{\times}S_1^1,\;S^1{\times}L$ and $\mathbb{R}{\times}H_0^1$, respectively, and orthographic and stereographic projections on $S_1^2$ to Lorentzian plane, $L^2$.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.03a
• /
• pp.339-346
• /
• 1999

The stability of rock slope is considered to have a deep relation with types of rocks because types of rocks have their own typical weathering profiles, geological structures and characteristics of failures. Therefore it is essential for the evaluation of rock slope stability to analyze geological and engineering characteristics in rock mass. The data which collected from investigated slopes in sedimentary rock of Kyengsang Basin along highways were analyzed. Primary factors affecting slope stability in rock mass are: dips and strikes of slopes and discontinuities, shear strength of discontinuities, slope geometry and geological structures etc.

• Journal of computational fluids engineering
• /
• v.13 no.2
• /
• pp.1-7
• /
• 2008

For Aerodynamic analysis of vehicle at altitude, 100km, the validity of governing equations based on continuum model, was reviewed. Also, as the preliminary study for the sub-orbital space plane development, a candidate geometry was suggested and computational fluid dynamic(CFD) analysis was performed for various angles of attack in subsonic and supersonic flow regimes to analyze the aerodynamic characteristics and performance. The inviscid flow analyses showed that the stall starts at angle of attack above $20^{\circ}$, the maximum drag is generated at angle of attack, $87^{\circ}$ and the maximum lift to drag ratio is about 8 in subsonic flow. In supersonic, the stall angle is about $40^{\circ}$ and the maximum drag is generated at angle of attack, $90^{\circ}$. Also, mach number distribution of re-entry vehicle was computed versus altitudes.

• Journal of Educational Research in Mathematics
• /
• v.8 no.1
• /
• pp.137-144
• /
• 1998

A common geoboard puzzel serves as the point of departure for an investigation that lends itself to whole-group discussion with a class of prospective secondary school teachers. Students are provided with opportunities to devise and carry out problem-solving strategies (called 'heuristics' by Polya); exploit inerrelationships among geometry, arithmetic and algebra; formulate generalizations and conjectures; plan and execute an computational project; construct mathematical arguments to establish theorems; and find counter-examples to dispose of a false conjecture. In recent tears, Eugene F. Krause wrote two papers having the same title except for the numeral In that papers he arrives at an theorem about the sizes of squares with lattice point vertices in the coordinate plane, In this paper we follow a different path genearlization to coordinate 3-space