• 한국측량학회지
• /
• 제39권5호
• /
• pp.343-349
• /
• 2021

In The process from design to construction in the existing construction work was less efficient due to the contradictory approach of identifying the 3D state in the plan view and the repeated generation of surveys, floor plans, drawings. Accurate 3D design data is essential for smart construction. However, most of the existing related studies have focused on explaining the development method and main functions of equipment or improving the productivity of smart construction. Therefore, in this study, the utility of 3D design model generation for smart construction and construction survey using 3D laser scanner was evaluated. Plane and vertical road alignment were created using the specifications of the road. The generated road alignment was created as a three-dimensional corridor design using cross-sections at intervals of 20m. In addition, it was possible to create a DTM (Digital Terrain Model) using a digital map and effectively create a 3D design model for the study area through overlapping. Construction survey using a 3D laser scanner showed accuracy within 10cm as a result of the accuracy evaluation. These results proved that construction surveying using a 3D laser scanner is possible because it satisfies the acceptable accuracy of the relevant regulations modeling of target areas using 3D design and construction survey using 3D laser scanner can be a way to address shortcomings of existing GNSS (Global Navigation Satellite System) methods. And accurate 3D data will be used as essential data as basic data for smart construction.

• Journal of Astronomy and Space Sciences
• /
• 제21권4호
• /
• pp.417-428
• /
• 2004

광시야 망원경 3호기의 광학계 특성을 조사하고 이를 바탕으로 광학계를 조정하였다. 보정렌즈를 쓰기 때문에 필터는 V, R, I로 제한된다. 광시야 망원경 3호기는 초점비가 작기 때문에 광학계의 정렬 상태에 매우 민감하다. 2도${\times}2$도의 시야각 내에서 성상의 RMS 반경을 $8{\mu}m$ 이내로 맞추려면 다음의 조건을 만족해야 한다: 1) 관측기기는 초점면에 대하여 0.05도 이상 기울어지면 안된다. 2) 주경과 보정렌즈의 축간 거리(decenter)를 1mm 이내로 맞추어야 한다. 3) 주경과 보정렌즈 사이를 최적 거리에서 2.3mm 이내로 맞추어야 한다. 광시야 망원경 3호기는 곡률감지법을 이용한 수차 측정법으로 광학계를 조정하고 있으며 마무리 단계에 있다. 현재 대덕전파천문대 옥상에 임시로 설치되어 시스템 정상화와 인공위성 관측을 수행하고 있다.

• 한국항공우주학회지
• /
• 제43권5호
• /
• pp.472-478
• /
• 2015

본 논문에서는 소형 위성 카메라의 영상안정화를 위해 진동외란 보상 및 궤도상 광학정렬이 가능한 능동형 광학 보정장치의 설계에 대해 연구하였다. 능동형 광학 보정장치는 초점면부 보정장치와 부경 보정장치로 이루어져 있다. 초점면부 보정장치는 영상센서에 유입되는 진동 외란을 초점면부에서 직접 보상하는 장치이다. 또한 부경 보정장치는 초점면부 보정장치와 협력하여 궤도상에서 능동적으로 광학정렬을 수행할 수 있는 장치이다. 본 논문에서는 해상도 1 m급 소형 위성에 적용 가능한 능동형 광학 보정장치 설계를 위해 소형 고해상도 위성 카메라의 요구도를 분석하고, 진동 외란 보상과 궤도상 광학정렬이 능동적으로 가능하도록 초점면부 보정장치와 부경 보정장치의 요구도를 선정하였다. 선정된 요구도를 기준으로 본 연구에서 설계된 능동형 광학 보정장치는 초점면부에서 진동외란 보상 및 초점조절, 부경에서 틸트 및 디스페이싱 보상이 가능하므로 독립적으로 5축 제어가 가능한 시스템이다.

• Journal of Korean Neurosurgical Society
• /
• 제50권4호
• /
• pp.348-356
• /
• 2011

Objective : The safety and efficacy of various fusion substitutes in pyogenic osteomyelitis has not been investigated. We evaluated and compared the cadaveric allograft and titanium cages used to reconstruct, maintain alignment and achieve fusion in the management of pyogenic spinal infection. Methods : There were 33 patients with pyogenic osteomyelitis underwent fusion in this study. Fifteen of the 33 patients were operated on by fusion with allografts (cadaveric patella bones) and 18 of those were operated with titanium mesh cages filled with autologous cancellous iliac bone. After the affected disc and vertebral body resection with pus drainage, cadaveric allograft or titanium cages were inserted into the resected space. Posterior transpedicular screw fixation and rod compression in resected space, where cadaveric allograft or titanium cages were inserted, was performed to prevent the malposition in all patients except in 1 case. Recurrent infection was identified by serial erythrocyte sedimentation rate and cross reactive protein follow-up. Osseous union and recurred infection available at a minimum of 2 years following operation was identified. The amount of kyphosis correction and the subsidence were measured radiographically. Results : Spinal fusion was achieved in 29 of 33 patients. In the cadaveric allograft group, 93.3% of patient (14 of 15) showed the osseous union while 83.3% of patient (15 of 18) in the titanium cage group showed union. Subsidence was noted in 12 of the patients. Twelve patients (36.3%) showed unsettling amounts of subsidence postoperatively whereas 46.6% of patients in the cadaveric allograft group and 37.7% of patients in the titanium cage group showed similar subsidence, respectively. There were statistical difference in the fusion rate (p=0.397) and subsidence rate (p=0.276) between the two groups. There was significant statistical difference in the postoperative improvement of segmental kyphosis between the two groups (p=0.022), that is the improvement in sagittal alignment was greater in the titanium cage group than in the cadaveric allograft group. There was no case of recurred infection. Conclusion : The cadaveric allograft and titanium cages are effective and safe in restoring and maintaining sagittal plane alignment without increased incidence in infection recurrence in pyogenic osteomyelitis. The postoperative improvement of segmental kyphosis was better in the cage group.

• 천문학회지
• /
• 제37권4호
• /
• pp.159-169
• /
• 2004

This is a proposal to probe local part of the interplanetary dust (IPD) cloud complex and retrieve mean volume emissivity of the local IPDs at mid-infrared wavelengths. This will be done by monitoring, with Infrared Camera (IRC) aboard the ASTRO-F, the annual modulation of the zodiacal emission. In pointing mode of the ASTRO-F mission the spacecraft can make attitude maneuvering over approximately ${\pm}1^{\circ}$ range centered at solar elongation $90^{\circ}$ in the ecliptic plane. The attitude maneuvering combined with high sensitivity of the IRC will provide us with a unique opportunity observationally to take derivatives of the zodiacal emission brightness with respect to the solar elongation. From the resulting differential of the brightness over the ${\pm}1^{\circ}$ range, one can directly determine the mean volume emissivity of the local IPDs with a sufficient accuracy to de-modulate the annual emissivity variations due to the Earth's elliptical motion and the dis-alignment of the maximum IPD density plane with respect to the ecliptic. The non-zero eccentricity ($e_{\oplus}$= 0.0167) of the Earth's orbit combined with the sensitive temperature dependence of the Planck function would bring modulations of amplitude at least $3.34\%$ to the zodiacal emission brightness at mid-infrared wavelengths, with which one may determine the IPD temperature T(r) and mean number density n(r) as functions of heliocentric distance r. This will in turn fix the power-law exponent $\delta$ in the relation $T(r) = T_o(r/r_o)^{-\delta}$ for the dust temperature and v in $n(r) = n_o(r/r_o)^-v$ for the density. We discuss how one may de-couple the notorious degeneracy of cross-section, density, reference temperature $T_o$ and exponent $\delta$.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2011년도 한국우주과학회보 제20권1호
• /
• pp.31.2-31.2
• /
• 2011

IGRINS (Immersion GRating INfrared Spectrometer) is a high resolution wide-band infrared spectrograph developed by Korea Astronomy and Space Science Institute (KASI) and the University of Texas at Austin (UT). The slit-viewing camera is one of four re-imaging optics in IGRINS including the input relay optics and the H- and K- band spectrograph cameras. Consisting of five lenses and one Ks-band filter, the slit viewing camera relays the infrared image of $2'{\times}2'$ field around the slit to the detector focal plane. Since IGRINS is a cryogenic instrument, the lens barrel is designed to be optimized at the operating temperature of 130 K. The barrel design also aims to achieve easy alignment and assembly. We use radial springs and axial springs to support lenses and lens spacers against the gravity and thermal contraction. Total weight of the lens barrel is estimated to be 1.2 kg. Results from structural analysis are presented.

• 한국정밀공학회지
• /
• 제20권7호
• /
• pp.114-119
• /
• 2003

The aligning between the punch and die governs no only the burr formation characteristics but also the life time of the punch and die in the sheet metal blanking process. There are many ways to adjust the two elements in the general punching systems but in the case of micro punch system, the punch size is reduced to a few tenth of micrometer range and the general aligning methods are almost impossible to apply. The image processing is the most widely used method in micro punch aligning, but in order to apply the method, it needs quite a large space for visionary system to approach the punch-die aligning zone. In this paper, the new punch-die aligning method with using the total capacitance between the punch and die hole is proposed. In this method, the tip surface of the punch tool locates at the same plane of the die surface and the capacitance variation between the two elements are measured. When the center of the two elements are coincided, the capacitance is minimized, but when the align is changed to any direction, the capacitance between the two elements increase. In order to verify the feasibility of this method, the aligning and punching tests was performed.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.95-98
• /
• 1999

The crystalline alignment of Ni substrates textured by RABiTS have a probability distribution in the surface plane. This makes it difficult to obtain a high quality of textures over all the range of a long Ni tape. In order to improve the textures of Ni tape, we have investigated a new method of texturing. We obtained non-cube textured Ni tapes by rolling and annealing a high purity Ni. In these tapes, the [001]-axes were tilted around the rolling direction, and the [100]-axes were parallel to the rolling direction. The average grain size was several cm$^2$. We deposited buffer layer (CeO$^2$/YSZ/CeO$^2$) and YBCO on those tapes. We found out that a YBCO film with grows normal with respect to the surface and this feature is independent of the tilting angles of the Ni [001]-axes.

• 대한치과교정학회지
• /
• 제17권1호
• /
• pp.23-32
• /
• 1987

There are variations in regional cranial and facial balance as a normal developmental process and regional imbalances often tend to compensate each other to provide functional equilibrium. This study was designed to analyse the patterns of morphologic harmony and inharmony inherent in normal occlusion and malocclusion. The subjects consisted of 92 individuals with normal occlusion and 60 Class III malocclusion patients. Their lateral cephalograms were traced and analysed using the counterpart analysis described by Enlow. The normal occlusion group was divided into Normal Types A and B according to the relative positions of Points A and B. The following conclusions were reached: 1 The normal occlusion consisted of $28.3\%$ of Normal Type A and $69.6\%$ of Normal Type B. 2. The Normal Type A and B differed from each other in the morphology of the cranial base, the mandibular ramus and corpus, and the functional occlusal plane. The Normal Type B showed considerable mandibular protrusion effect in the effective dimension and alignment of the above factors. 3. Most normal individuals showed some degree of disharmony among morphologic factors but the deviations were relatively small. 4. The Normal Type B was less balanced than the Normal Type A. 5. More regional imbalances were involved in Class III malocclusion and the imbalances were more severe.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.865-868
• /
• 2001

We designed and fabricated a planner-type thermoelastic microactuator with a latch-up operation for optical switching. Latch-up actuation is prerequisite to implement an optical switch with low power consumption and high reliability. The proposed microactuator consists of four cantilever-shaped thermal actuators, four displacement linkages, two shallow arch-shaped leaf springs, a mobile shuttle mass with a micromirror, and four elastic boundaries. The structural layer of the planar microactuator is phosphorous-doped 12$\mu\textrm{m}$-thick polysilicon, and the sacrificial layer is LTO(Low Temperature Oxide) of 3$\mu\textrm{m}$thickness. The displacement of actuator is as large as 3$\mu\textrm{m}$when the length of actuation bar is 100$\mu\textrm{m}$in length at 5V input voltage. The proposed microactuators have advantages of easy assembly with other optical component by way of fiber alignment in the substrate plane, and its fabrication process features simplicity while retaining batch-fabrication economy.