• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1236-1239
• /
• 2004

We developed a new cholesteric material for bistable LCDs. The material consists of dispersion of sub-micron ferroelectric particles in cholesteric host. We found that the doping of the cholesteric with ferroelectric particles in small concentration (< 1% by weight) strongly improved basic characteristics of the transition between poly-domain planar texture and focal conic texture. Decrease of the driving voltage, increase of the reflection contrast and the steepness of the transition is associated with giant steady dipole and dielectric constant of the ferroelectric particles.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.101-104
• /
• 1996

A new detecting system for moving objects of coastal region has been designed by directional antenna and driving circuits. The designed system has been investigated by CAD for linear and planar antenna arrays of various radiating elements for antenna simulations and by P-spice of device simulations. For detecting the displacement of moving objects, we constructed four wideband dipole antenna, diode switching circuit, mixer, filter and amplifier. The results of antenna receiver were shown a possibility of distance measuring system through phase difference of radiation patterns in antenna simulation

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.2
• /
• pp.21-27
• /
• 2014

In this paper, a planar sleeve monopole antenna for indoor digital TV reception is presented. The antenna has broadband property with the planar monopole and ground of sleeve. Sleeve monopole and ground conductors of the antenna are on the same plane, and exited through CPW feeding. Sleeve monopole and ground of proposed antenna exist on coplanar plane, and excite as CPW. It used FR4 epoxy dielectric substrate of ${\varepsilon}r=4.4$, and the size is $20[mm]{\times}170[mm]{\times}1.6[mm]$ dimension. So the internal antenna is suitable. The measurement results of the fabricated antenna, return loss is larger than -10 [dB] in 470~806 [MHz]. Maximum gain is 0.59 [dBi] on E-plane at 810 MHz and 1.70 [dBi] on H-plane at 640 [MHz]. Radiation pattern is about the same that of dipole antenna at all frequency.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.4
• /
• pp.43-49
• /
• 2013

In this paper, it is designed inverted triangle structural planar monopole antenna with edge and rectangle slot for UWB(Ultra Wide Band) communication (3.1~10.6 GHz) and researched in about 5.8 GHz notch structure to prevent interference between UWB systems and existing wireless systems for using Wi-Fi service. The antenna have broadband property structurally through inverted triangle structural planar monopole which have edge. and rectangle form addition planned notch slot of 1 mm and height 0.1 mm. Monopole and ground of proposed antenna exist on coplanar plane, and excite as CPW. It used FR4 epoxy dielectric substrate of ${\varepsilon}r$=4.4, and the size is $20{\times}20{\times}1.6$ mm dimension. The measured results that are obtained return loss under -10 dB through 3.1~10.6 GHz(7.5 GHz) without Wi-Fi bandwidth and maximum gain of 8.44 dBi at E-plane. Radiation pattern is about the same that of dipole antenna at all frequency. And using notch slot and it will be able to confirm the quality which becomes notch from 5.8 GHz which are a radio LAN frequency range.

• Journal of Advanced Navigation Technology
• /
• v.7 no.2
• /
• pp.101-107
• /
• 2003

In this study, we provide a single element log-periodic antenna that the feeding networks and array structures are aperture coupled and series dipole array type. We made the antenna for direct receiving the Moogoongwha satellite broadcasting signal. The transmission power was able to feed the patch dipole in series due to lay perpendicularly 8 series patch dipole on tapered slot. The patch dipole radiation pattern which fed in series power, make the main beam direction up $37^{\circ}{\sim}42^{\circ}$ within the BS/CS bandwidth. The main beam gain was measured 9.31~11.03 dBi. Using 32 elements to array the elements properly, we acquire $4{\times}8$ array structure on limited PCB board. As a result, it has been found that the new planar DBS antenna structure have high gain over 10dBi and acceptable elevation angle over 42 degree, and we can apply this result to commercial DBS reception antenna manufacturing.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.12
• /
• pp.2199-2205
• /
• 2016

In this paper, a design method for a coplanar waveguide (CPW)-fed 2-element quasi-Yagi antenna (QYA) is studied. A balun between CPW and coplanar strip (CPS) which feeds a planar dipole is implemented by connecting the one end of ground strips in a CPW to a signal strip. The antenna size is reduced by bent strip dipole and reflector, and an integrated balun. The proposed antenna was designed for the operation in a UHF radio frequency identification (RFID) band of 902-928 MHz, and the effects of various parameters such as dipole length, reflector length, distance between dipole and reflector, feed position were examined. The antenna with a size of $90mm{\times}80mm$ was fabricated on an FR4 substrate, and the experiment results reveal a frequency band of 885-942 MHz for a voltage standing wave ratio < 2, a gain > 4.3 dBi, and a front-to-back ratio > 7 dB over the frequency band for the UHF RFID.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.1
• /
• pp.73-86
• /
• 1993

This paper describes a potential-based panel method for the prediction of steday performance of a marine propeller operating in a uniform oncoming flow. An integral equation with unknown dipole strengths is formulated by distributing the normal dipoles and/or sources on the blade and hub surfaces and the wake sheet, and is solved numerically upon discretization. A hyperboloidal panel has been adopted to compute the potential induced by a normal dipole on a non-planar quadrilateral panel. The Kutta condition is satisfied by iteratively annulling the pressure jumps at the trailing edge. Extensive convergence tests are carried out, and the influence of the wake model upon performance is studied. Predicted performance is shown to correlate well with the experiments.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.475-476
• /
• 2015

In this paper, we introduce a novel feeding method for a broadband planar quasi-Yagi antenna (QYA) for terrestrial digital television (DTV) receiving. The balun between the balanced coplanar strip (CPS) line feeding the driver dipole and the unblanaced microstrip line is a rectangular patch inserted into the CPS line along the center of the CPS. The end of the balun is connected to the CPS line through a shorting pin. The effects of various geometrical parameters and balun on the antenna characteristics are examined. An antenna, as an design example for the proposed antenna, is designed for the operation in the frequency band of 470-806 MHz for terrestrial DTV.

• Journal of the Korean Chemical Society
• /
• v.34 no.6
• /
• pp.593-599
• /
• 1990

A series of new, square planar, and mixed-ligand complexes of Ni(Ⅱ), Pd(Ⅱ), and Pt(Ⅱ) have been prepared. From the observation of electronic spectrum for the variation of the ligand substituents, the very intense absorption band in the visible range is by the electronic transition of dithiolene to diimine ligand, HOMO to LUMO. In the various solvent systems the IT band shows the similar behavior to IT transition of mixed-valence dinuclear complexes followed with Hush theory, happens rto dominently by the inner sphere charge transfer transition. The negative solvatochromism represents that the excited-state electric dipole is reduced or reversed by the electronic transition.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.6
• /
• pp.612-620
• /
• 2008

In this parer, parabolic edge planar monopole antenna for UWB communication is presented. The antenna have broadband property structurally through planar monopole and ground which have parabolic edge. It is designed close to self-complementary structure as changing curvature of edge of monopole and ground. Monopole and ground of proposed antenna exist on coplanar plane, and excite as coaxial feeding. It used FR4 dielectric substrate of ${\varepsilon}_r=4.4$, and the size is $26{\times}31{\times}1.6mm$. Return loss is more than 10 dB in $3.1{\sim}10.6GHz$. Radiation pattern is about the same that of dipole antenna at all frequency. At measured result, max gain is $1.37{\sim}6.02dBi$ at E-plane.